On 7/17/07, Tejun Heo <[EMAIL PROTECTED]> wrote:
Yasha Okshtein wrote:
> Well ideally this should work with a port multiplier to soft/hardreset
> only one disk behind the multiplier.
You can do that too. Just do 'echo x - -' where x corresponds to the
PMP port number. On older versions it's 'echo - x -'.
Nice, thanks!
> Also, this again doesn't allow
> the user to specify soft or hard reset - I believe rescanning forces
> hardresets. Fully implementing the SATA spec, which should eventually
> be done anyway, seems like a cleaner solution.
It defaults to softreset.
That still leaves the original problem of hardresets :)
- yasha
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
