Hello List
My HP N5430 Laptop used to be udma/66 under the old ide driver. Is there
a way
to get it back to that under the new drivers. The drive is plugged via a
right angle
connector directly to the mother board - in otherwords there is no cable.
scsi0 : pata_ali
scsi1 : pata_ali
ata1: PATA max UDMA/66 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011000 irq 14
ata2: PATA max UDMA/66 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011008 irq 15
ata1.00: ATA-5: HITACHI_DK23CA-20, 00H1A0A3, max UDMA/100
ata1.00: 39070080 sectors, multi 16: LBA
ata1.00: limited to UDMA/33 due to 40-wire cable
ata1.00: configured for UDMA/33
Any help would be appreciated.
Regards,
Steve
--
"They that give up essential liberty to obtain temporary safety,
deserve neither liberty nor safety." (Ben Franklin)
"The course of history shows that as a government grows, liberty
decreases." (Thomas Jefferson)
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
