On Monday 23 July 2007, Sergei Shtylyov wrote:
> Hello.
>
> Bartlomiej Zolnierkiewicz wrote:
>
> > Use ->set_pio_mode method to program PIO modes in ide_set_xfer_rate()
> > (the only place which used ->speedproc to program PIO modes) and remove
> > handling of PIO modes from all ->speedproc implementations.
>
> > There should be no functionality changes caused by this patch.
>
> > Signed-off-by: Bartlomiej Zolnierkiewicz <[EMAIL PROTECTED]>
>
> > Index: b/drivers/ide/cris/ide-cris.c
> > ===================================================================
> > --- a/drivers/ide/cris/ide-cris.c
> > +++ b/drivers/ide/cris/ide-cris.c
> > @@ -724,11 +724,6 @@ static int speed_cris_ide(ide_drive_t *d
> > {
> > int cyc = 0, dvs = 0, strobe = 0, hold = 0;
> >
> > - if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) {
> > - cris_set_pio_mode(drive, speed - XFER_PIO_0);
> > - return ide_config_drive_speed(drive, speed);
> > - }
> > -
> > switch(speed)
> > {
> > case XFER_UDMA_0:
> > Index: b/drivers/ide/ide-lib.c
> > ===================================================================
> > --- a/drivers/ide/ide-lib.c
> > +++ b/drivers/ide/ide-lib.c
> > @@ -398,6 +398,18 @@ int ide_set_xfer_rate(ide_drive_t *drive
> >
> > rate = ide_rate_filter(drive, rate);
> >
> > + if (rate >= XFER_PIO_0 && rate <= XFER_PIO_5) {
> > + if (hwif->set_pio_mode)
> > + hwif->set_pio_mode(drive, rate - XFER_PIO_0);
>
> BTW, why doesn it pass CF-specific PIO6? Not an issue now, but what the
> hell? I'd suggest instead:
>
> if (rate & XFER_PIO_0) {
Like you've said not an issue now and moreover the current code serves
as a documentation that PIO6 is not supported. ;)
Thanks,
Bart
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
