> + * Register transfer timing table
> + */
> +/* mode: 0 1 2 3 4 */
> +/* Cycle Time */
> +static u32 reg_t0min[] = { 600, 383, 330, 180, 120 };
> +/* DIOR/DIOW to end cycle */
> +static u32 reg_t2min[] = { 290, 290, 290, 70, 25 };
> +/* DIOR/DIOW asserted pulse width */
> +static u32 reg_teocmin[] = { 290, 290, 290, 80, 70 };
> +
> +/**
> + * PIO timing table
> + */
> +/* mode: 0 1 2 3 4 */
> +/* Cycle Time */
> +static u32 pio_t0min[] = { 600, 383, 240, 180, 120 };
> +/* Address valid to DIOR/DIORW */
> +static u32 pio_t1min[] = { 70, 50, 30, 30, 25 };
> +/* DIOR/DIOW to end cycle */
> +static u32 pio_t2min[] = { 165, 125, 100, 80, 70 };
> +/* DIOR/DIOW asserted pulse width */
> +static u32 pio_teocmin[] = { 165, 125, 100, 70, 25 };
> +/* DIOW data hold */
> +static u32 pio_t4min[] = { 30, 20, 15, 10, 10 };
Why not use the timing tables provided by libata ?
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
