Shaohua Li wrote:
ACPI spec (ver 3.0a, p289) requires IDE power on/off executes ACPI _PSx
methods. As recently most PATA drivers use libata, this patch adds _PSx
method support in libata. ACPI spec doesn't mention if SATA requires the
same _PSx method, but executing _PSx for SATA should be ok I think.
Signed-off-by: Shaohua Li <[EMAIL PROTECTED]>
ahci and sata_sil24 directly power off components, so it seems quite
unwise for "modern" SATA controllers.
ISTR Tejun, when he cleaned up libata-acpi, finally figured out a good
way to distinguish ACPI's idea of "IDE" -- which sometimes includes the
legacy programming mode of SATA controllers, and a controller running a
modern programming mode.
Your best bet is to use a similar test when deciding when to execute
_PSx. Or, you could simply be conservative and only do it for PATA.
outside of those issues, the rest of the patch looks ok.
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
