Use ->set_pio_mode method to program PIO modes in ide_set_xfer_rate()
(the only place which used ->speedproc to program PIO modes) and remove
handling of PIO modes from all ->speedproc implementations.
v2:
* Fix pmac_ide_tune_chipset() comment.
There should be no functionality changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <[EMAIL PROTECTED]>
---
replacement patch for the one currently in IDE quilt tree
drivers/ide/cris/ide-cris.c | 5 -----
drivers/ide/ide-lib.c | 12 ++++++++++++
drivers/ide/mips/au1xxx-ide.c | 5 -----
drivers/ide/pci/alim15x3.c | 5 -----
drivers/ide/pci/atiixp.c | 5 -----
drivers/ide/pci/cmd64x.c | 8 --------
drivers/ide/pci/cs5520.c | 36 ++++++++++++++----------------------
drivers/ide/pci/cs5530.c | 7 -------
drivers/ide/pci/it8213.c | 5 -----
drivers/ide/pci/it821x.c | 9 ---------
drivers/ide/pci/piix.c | 5 -----
drivers/ide/pci/sc1200.c | 10 ----------
drivers/ide/pci/scc_pata.c | 7 -------
drivers/ide/pci/serverworks.c | 5 -----
drivers/ide/pci/siimage.c | 7 -------
drivers/ide/pci/sis5513.c | 12 ++----------
drivers/ide/pci/sl82c105.c | 8 --------
drivers/ide/pci/slc90e66.c | 5 -----
drivers/ide/ppc/pmac.c | 9 +--------
19 files changed, 29 insertions(+), 136 deletions(-)
Index: b/drivers/ide/cris/ide-cris.c
===================================================================
--- a/drivers/ide/cris/ide-cris.c
+++ b/drivers/ide/cris/ide-cris.c
@@ -724,11 +724,6 @@ static int speed_cris_ide(ide_drive_t *d
{
int cyc = 0, dvs = 0, strobe = 0, hold = 0;
- if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) {
- cris_set_pio_mode(drive, speed - XFER_PIO_0);
- return ide_config_drive_speed(drive, speed);
- }
-
switch(speed)
{
case XFER_UDMA_0:
Index: b/drivers/ide/ide-lib.c
===================================================================
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -398,6 +398,18 @@ int ide_set_xfer_rate(ide_drive_t *drive
rate = ide_rate_filter(drive, rate);
+ if (rate >= XFER_PIO_0 && rate <= XFER_PIO_5) {
+ if (hwif->set_pio_mode)
+ hwif->set_pio_mode(drive, rate - XFER_PIO_0);
+
+ /*
+ * FIXME: this is incorrect to return zero here but
+ * since all users of ide_set_xfer_rate() ignore
+ * the return value it is not a problem currently
+ */
+ return 0;
+ }
+
return hwif->speedproc(drive, rate);
}
Index: b/drivers/ide/mips/au1xxx-ide.c
===================================================================
--- a/drivers/ide/mips/au1xxx-ide.c
+++ b/drivers/ide/mips/au1xxx-ide.c
@@ -177,11 +177,6 @@ static int auide_tune_chipset(ide_drive_
mem_sttime = 0;
mem_stcfg = au_readl(MEM_STCFG2);
- if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) {
- au1xxx_set_pio_mode(drive, speed - XFER_PIO_0);
- return 0;
- }
-
switch(speed) {
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
case XFER_MW_DMA_2:
Index: b/drivers/ide/pci/alim15x3.c
===================================================================
--- a/drivers/ide/pci/alim15x3.c
+++ b/drivers/ide/pci/alim15x3.c
@@ -421,11 +421,6 @@ static int ali15x3_tune_chipset(ide_driv
if (speed < XFER_PIO_0)
return 1;
- if (speed >= XFER_PIO_0 && speed <= XFER_PIO_5) {
- ali_tune_pio(drive, speed - XFER_PIO_0);
- return ide_config_drive_speed(drive, speed);
- }
-
if (speed == XFER_UDMA_6)
speed1 = 0x47;
Index: b/drivers/ide/pci/atiixp.c
===================================================================
--- a/drivers/ide/pci/atiixp.c
+++ b/drivers/ide/pci/atiixp.c
@@ -178,11 +178,6 @@ static int atiixp_speedproc(ide_drive_t
u16 tmp16;
u8 pio;
- if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) {
- atiixp_tune_pio(drive, speed - XFER_PIO_0);
- return ide_config_drive_speed(drive, speed);
- }
-
spin_lock_irqsave(&atiixp_lock, flags);
save_mdma_mode[drive->dn] = 0;
Index: b/drivers/ide/pci/cmd64x.c
===================================================================
--- a/drivers/ide/pci/cmd64x.c
+++ b/drivers/ide/pci/cmd64x.c
@@ -323,14 +323,6 @@ static int cmd64x_tune_chipset(ide_drive
case XFER_MW_DMA_0:
program_cycle_times(drive, 480, 215);
break;
- case XFER_PIO_5:
- case XFER_PIO_4:
- case XFER_PIO_3:
- case XFER_PIO_2:
- case XFER_PIO_1:
- case XFER_PIO_0:
- cmd64x_tune_pio(drive, speed - XFER_PIO_0);
- break;
default:
return 1;
}
Index: b/drivers/ide/pci/cs5520.c
===================================================================
--- a/drivers/ide/pci/cs5520.c
+++ b/drivers/ide/pci/cs5520.c
@@ -66,30 +66,13 @@ static struct pio_clocks cs5520_pio_cloc
{1, 2, 1}
};
-static int cs5520_tune_chipset(ide_drive_t *drive, const u8 speed)
+static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *pdev = hwif->pci_dev;
- int pio = speed;
- u8 reg;
int controller = drive->dn > 1 ? 1 : 0;
+ u8 reg;
- switch(speed)
- {
- case XFER_PIO_4:
- case XFER_PIO_3:
- case XFER_PIO_2:
- case XFER_PIO_1:
- case XFER_PIO_0:
- pio -= XFER_PIO_0;
- break;
- default:
- pio = 0;
- printk(KERN_ERR "cs55x0: bad ide timing.\n");
- }
-
- printk("PIO clocking = %d\n", pio);
-
/* FIXME: if DMA = 1 do we need to set the DMA bit here ? */
/* 8bit CAT/CRT - 8bit command timing for channel */
@@ -114,12 +97,21 @@ static int cs5520_tune_chipset(ide_drive
reg |= 1<<((drive->dn&1)+5);
outb(reg, hwif->dma_base + 0x02 + 8*controller);
- return ide_config_drive_speed(drive, speed);
+ (void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
-static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio)
+static int cs5520_tune_chipset(ide_drive_t *drive, const u8 speed)
{
- cs5520_tune_chipset(drive, XFER_PIO_0 + pio);
+ printk(KERN_ERR "cs55x0: bad ide timing.\n");
+
+ cs5520_set_pio_mode(drive, 0);
+
+ /*
+ * FIXME: this is incorrect to return zero here but
+ * since all users of ide_set_xfer_rate() ignore
+ * the return value it is not a problem currently
+ */
+ return 0;
}
static int cs5520_config_drive_xfer_rate(ide_drive_t *drive)
Index: b/drivers/ide/pci/cs5530.c
===================================================================
--- a/drivers/ide/pci/cs5530.c
+++ b/drivers/ide/pci/cs5530.c
@@ -163,13 +163,6 @@ static int cs5530_tune_chipset(ide_drive
case XFER_MW_DMA_0: timings = 0x00077771; break;
case XFER_MW_DMA_1: timings = 0x00012121; break;
case XFER_MW_DMA_2: timings = 0x00002020; break;
- case XFER_PIO_4:
- case XFER_PIO_3:
- case XFER_PIO_2:
- case XFER_PIO_1:
- case XFER_PIO_0:
- cs5530_tunepio(drive, mode - XFER_PIO_0);
- return 0;
default:
BUG();
break;
Index: b/drivers/ide/pci/it8213.c
===================================================================
--- a/drivers/ide/pci/it8213.c
+++ b/drivers/ide/pci/it8213.c
@@ -132,11 +132,6 @@ static int it8213_tune_chipset(ide_drive
u16 reg4042, reg4a;
u8 reg48, reg54, reg55;
- if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) {
- it8213_tune_pio(drive, speed - XFER_PIO_0);
- return ide_config_drive_speed(drive, speed);
- }
-
pci_read_config_word(dev, maslave, ®4042);
pci_read_config_byte(dev, 0x48, ®48);
pci_read_config_word(dev, 0x4a, ®4a);
Index: b/drivers/ide/pci/it821x.c
===================================================================
--- a/drivers/ide/pci/it821x.c
+++ b/drivers/ide/pci/it821x.c
@@ -418,15 +418,6 @@ static int it821x_tune_chipset(ide_drive
ide_hwif_t *hwif = drive->hwif;
struct it821x_dev *itdev = ide_get_hwifdata(hwif);
- switch (speed) {
- case XFER_PIO_4:
- case XFER_PIO_3:
- case XFER_PIO_2:
- case XFER_PIO_1:
- case XFER_PIO_0:
- return it821x_tunepio(drive, speed - XFER_PIO_0);
- }
-
if (itdev->smart == 0) {
switch (speed) {
/* MWDMA tuning is really hard because our MWDMA and PIO
Index: b/drivers/ide/pci/piix.c
===================================================================
--- a/drivers/ide/pci/piix.c
+++ b/drivers/ide/pci/piix.c
@@ -242,11 +242,6 @@ static int piix_tune_chipset(ide_drive_t
u16 reg4042, reg4a;
u8 reg48, reg54, reg55;
- if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) {
- piix_tune_pio(drive, speed - XFER_PIO_0);
- return ide_config_drive_speed(drive, speed);
- }
-
pci_read_config_word(dev, maslave, ®4042);
sitre = (reg4042 & 0x4000) ? 1 : 0;
pci_read_config_byte(dev, 0x48, ®48);
Index: b/drivers/ide/pci/sc1200.c
===================================================================
--- a/drivers/ide/pci/sc1200.c
+++ b/drivers/ide/pci/sc1200.c
@@ -152,16 +152,6 @@ static int sc1200_tune_chipset(ide_drive
if (sc1200_set_xfer_mode(drive, mode))
return 1; /* failure */
- switch (mode) {
- case XFER_PIO_4:
- case XFER_PIO_3:
- case XFER_PIO_2:
- case XFER_PIO_1:
- case XFER_PIO_0:
- sc1200_tunepio(drive, mode - XFER_PIO_0);
- return 0;
- }
-
pci_clock = sc1200_get_pci_clock();
/*
Index: b/drivers/ide/pci/scc_pata.c
===================================================================
--- a/drivers/ide/pci/scc_pata.c
+++ b/drivers/ide/pci/scc_pata.c
@@ -270,13 +270,6 @@ static int scc_tune_chipset(ide_drive_t
case XFER_UDMA_0:
idx = speed - XFER_UDMA_0;
break;
- case XFER_PIO_4:
- case XFER_PIO_3:
- case XFER_PIO_2:
- case XFER_PIO_1:
- case XFER_PIO_0:
- scc_tune_pio(drive, speed - XFER_PIO_0);
- return ide_config_drive_speed(drive, speed);
default:
return 1;
}
Index: b/drivers/ide/pci/serverworks.c
===================================================================
--- a/drivers/ide/pci/serverworks.c
+++ b/drivers/ide/pci/serverworks.c
@@ -157,11 +157,6 @@ static int svwks_tune_chipset(ide_drive_
u8 ultra_enable = 0, ultra_timing = 0, dma_timing = 0;
- if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) {
- svwks_tune_pio(drive, speed - XFER_PIO_0);
- return ide_config_drive_speed(drive, speed);
- }
-
/* If we are about to put a disk into UDMA mode we screwed up.
Our code assumes we never _ever_ do this on an OSB4 */
Index: b/drivers/ide/pci/siimage.c
===================================================================
--- a/drivers/ide/pci/siimage.c
+++ b/drivers/ide/pci/siimage.c
@@ -284,13 +284,6 @@ static int siimage_tune_chipset(ide_driv
scsc = is_sata(hwif) ? 1 : scsc;
switch(speed) {
- case XFER_PIO_4:
- case XFER_PIO_3:
- case XFER_PIO_2:
- case XFER_PIO_1:
- case XFER_PIO_0:
- sil_tune_pio(drive, speed - XFER_PIO_0);
- return ide_config_drive_speed(drive, speed);
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:
case XFER_MW_DMA_0:
Index: b/drivers/ide/pci/sis5513.c
===================================================================
--- a/drivers/ide/pci/sis5513.c
+++ b/drivers/ide/pci/sis5513.c
@@ -519,15 +519,10 @@ static void config_art_rwp_pio (ide_driv
}
}
-static int sis5513_tune_drive(ide_drive_t *drive, const u8 pio)
-{
- config_art_rwp_pio(drive, pio);
- return ide_config_drive_speed(drive, XFER_PIO_0 + pio);
-}
-
static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio)
{
- (void)sis5513_tune_drive(drive, pio);
+ config_art_rwp_pio(drive, pio);
+ (void)ide_config_drive_speed(drive, XFER_PIO_0 + pio);
}
static int sis5513_tune_chipset(ide_drive_t *drive, const u8 speed)
@@ -537,9 +532,6 @@ static int sis5513_tune_chipset(ide_driv
u32 regdw;
u8 drive_pci, reg;
- if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4)
- return sis5513_tune_drive(drive, speed - XFER_PIO_0);
-
/* See config_art_rwp_pio for drive pci config registers */
drive_pci = 0x40;
if (chipset_family >= ATA_133) {
Index: b/drivers/ide/pci/sl82c105.c
===================================================================
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -139,14 +139,6 @@ static int sl82c105_tune_chipset(ide_dri
pci_write_config_word(dev, reg, drv_ctrl);
}
break;
- case XFER_PIO_5:
- case XFER_PIO_4:
- case XFER_PIO_3:
- case XFER_PIO_2:
- case XFER_PIO_1:
- case XFER_PIO_0:
- sl82c105_tune_pio(drive, speed - XFER_PIO_0);
- break;
default:
return -1;
}
Index: b/drivers/ide/pci/slc90e66.c
===================================================================
--- a/drivers/ide/pci/slc90e66.c
+++ b/drivers/ide/pci/slc90e66.c
@@ -110,11 +110,6 @@ static int slc90e66_tune_chipset(ide_dri
int u_speed = 0, u_flag = 1 << drive->dn;
u16 reg4042, reg44, reg48, reg4a;
- if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) {
- slc90e66_tune_pio(drive, speed - XFER_PIO_0);
- return ide_config_drive_speed(drive, speed);
- }
-
pci_read_config_word(dev, maslave, ®4042);
sitre = (reg4042 & 0x4000) ? 1 : 0;
pci_read_config_word(dev, 0x44, ®44);
Index: b/drivers/ide/ppc/pmac.c
===================================================================
--- a/drivers/ide/ppc/pmac.c
+++ b/drivers/ide/ppc/pmac.c
@@ -917,7 +917,7 @@ set_timings_mdma(ide_drive_t *drive, int
/*
* Speedproc. This function is called by the core to set any of the standard
- * timing (PIO, MDMA or UDMA) to both the drive and the controller.
+ * DMA timing (MDMA or UDMA) to both the drive and the controller.
* You may notice we don't use this function on normal "dma check" operation,
* our dedicated function is more precise as it uses the drive provided
* cycle time value. We should probably fix this one to deal with that too...
@@ -964,13 +964,6 @@ static int pmac_ide_tune_chipset(ide_dri
case XFER_SW_DMA_0:
return 1;
#endif /* CONFIG_BLK_DEV_IDEDMA_PMAC */
- case XFER_PIO_4:
- case XFER_PIO_3:
- case XFER_PIO_2:
- case XFER_PIO_1:
- case XFER_PIO_0:
- pmac_ide_set_pio_mode(drive, speed & 0x07);
- return 0;
default:
ret = 1;
}
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
