From: Matti Linnanvuori <[EMAIL PROTECTED]>

Correct IDEPCI_SHARE_IRQ description to keeping interrupts enabled
when calling the PCI IDE action handler.
Add IDEPCI_SHARE_IRQ and IDEDISK_MULTI_MODE help text from hdparm
manual page.

Signed-off-by: Matti Linnanvuori <[EMAIL PROTECTED]>
---

--- a/drivers/ide/Kconfig       2007-10-21 08:53:11.826349500 +0300
+++ b/drivers/ide/Kconfig       2007-10-21 09:21:48.295590000 +0300
@@ -154,6 +154,18 @@ config BLK_DEV_IDEDISK
 config IDEDISK_MULTI_MODE
        bool "Use multi-mode by default"
        help
+         Multiple sector mode is a feature of most modern IDE hard
+         drives, permitting the transfer of multiple sectors per I/O
+         interrupt, rather than the usual one sector per interrupt.
+         When this feature is enabled, it typically reduces operating
+         system overhead for disk I/O by 30-50%. On many systems, it
+         also provides increased data throughput of anywhere from 5%
+         to 50%. Some drives, however (most notably the WD Caviar
+         series), seem to run slower with multiple mode enabled. Some
+         drives claim to support multiple mode, but lose data at some
+         settings. Under rare circumstances, such failures can result
+         in massive filesystem corruption.
+
          If you get this error, try to say Y here:
 
          hda: set_multmode: status=0x51 { DriveReady SeekComplete Error }
@@ -367,11 +379,16 @@ config BLK_DEV_IDEPCI
        bool
 
 config IDEPCI_SHARE_IRQ
-       bool "Sharing PCI IDE interrupts support"
+       bool "Keeping interrupts enabled when calling the PCI IDE action 
handler support"
        depends on BLK_DEV_IDEPCI
        help
-         Some ATA/IDE chipsets have hardware support which allows for
-         sharing a single IRQ with other cards. To enable support for
+         A setting of Y permits the driver to unmask other interrupts
+         during processing of a disk interrupt, which greatly improves
+         Linux's responsiveness and eliminates "serial port overrun"
+         errors. Use this feature with caution: some drive/controller
+         combinations do not tolerate the increased I/O latencies
+         possible when this feature is enabled, resulting in massive
+         filesystem corruption. To enable support for
          this in the ATA/IDE driver, say Y here.
 
          It is safe to say Y to this question, in most cases.




        __________________________________  Ihr erstes Baby? Holen Sie sich 
Tipps von anderen Eltern.  www.yahoo.de/clever
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to