From: Aleksandar Radovanovic <[EMAIL PROTECTED]>
Add pci_enable_device() to aec62xx probe function
before doing any I/O.
Original probe function tries to read from device's
PCI region 4 before calling ide_setup_pci_device().
Since the device is not enabled at this point,
on machines that have no firmware PCI initialization
(e.g. ASUS WL-700gE router), corresponding PCI BAR
is 0 and the following inb() causes a kernel oops.
Signed-off-by: Aleksandar Radovanovic <[EMAIL PROTECTED]>
---
aec62xx.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
The patch has been tested and merged
in the trunk of the OpenWrt distribution
(on 2.6.23.1).
Anyway, should be a fairly obvious fix.
diff -Npur linux-2.6.24-rc3.orig/drivers/ide/pci/aec62xx.c
linux-2.6.24-rc3/drivers/ide/pci/aec62xx.c
--- linux-2.6.24-rc3.orig/drivers/ide/pci/aec62xx.c 2007-11-17
21:33:59.000000000 +0100
+++ linux-2.6.24-rc3/drivers/ide/pci/aec62xx.c 2007-11-17 20:55:12.000000000
+0100
@@ -260,6 +260,11 @@ static int __devinit aec62xx_init_one(st
{
struct ide_port_info d;
u8 idx = id->driver_data;
+ int err;
+
+ err = pci_enable_device(dev);
+ if (err)
+ return err;
d = aec62xx_chipsets[idx];
@@ -272,7 +277,11 @@ static int __devinit aec62xx_init_one(st
}
}
- return ide_setup_pci_device(dev, &d);
+ err = ide_setup_pci_device(dev, &d);
+ if (err)
+ pci_disable_device(dev);
+
+ return err;
}
static const struct pci_device_id aec62xx_pci_tbl[] = {
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
