* Add IDE_HFLAG_NO_DSC host flag for hosts that doesn't support DSC overlap.
* Set it in aec62xx (for ATP850UF only) and hpt34x host drivers.
* Convert ide-tape device driver to check for IDE_HFLAG_NO_DSC flag.
Signed-off-by: Bartlomiej Zolnierkiewicz <[EMAIL PROTECTED]>
---
drivers/ide/ide-tape.c | 16 ++++------------
drivers/ide/pci/aec62xx.c | 1 +
drivers/ide/pci/hpt34x.c | 1 +
include/linux/ide.h | 2 ++
4 files changed, 8 insertions(+), 12 deletions(-)
Index: b/drivers/ide/ide-tape.c
===================================================================
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -4532,19 +4532,11 @@ static void idetape_setup (ide_drive_t *
spin_lock_init(&tape->spinlock);
drive->dsc_overlap = 1;
-#ifdef CONFIG_BLK_DEV_IDEPCI
- if (HWIF(drive)->pci_dev != NULL) {
- /*
- * These two ide-pci host adapters appear to need DSC overlap
disabled.
- * This probably needs further analysis.
- */
- if ((HWIF(drive)->pci_dev->device ==
PCI_DEVICE_ID_ARTOP_ATP850UF) ||
- (HWIF(drive)->pci_dev->device == PCI_DEVICE_ID_TTI_HPT343))
{
- printk(KERN_INFO "ide-tape: %s: disabling DSC
overlap\n", tape->name);
- drive->dsc_overlap = 0;
- }
+ if (drive->hwif->host_flags & IDE_HFLAG_NO_DSC) {
+ printk(KERN_INFO "ide-tape: %s: disabling DSC overlap\n",
+ tape->name);
+ drive->dsc_overlap = 0;
}
-#endif /* CONFIG_BLK_DEV_IDEPCI */
/* Seagate Travan drives do not support DSC overlap. */
if (strstr(drive->id->model, "Seagate STT3401"))
drive->dsc_overlap = 0;
Index: b/drivers/ide/pci/aec62xx.c
===================================================================
--- a/drivers/ide/pci/aec62xx.c
+++ b/drivers/ide/pci/aec62xx.c
@@ -202,6 +202,7 @@ static const struct ide_port_info aec62x
.enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
.host_flags = IDE_HFLAG_SERIALIZE |
IDE_HFLAG_NO_ATAPI_DMA |
+ IDE_HFLAG_NO_DSC |
IDE_HFLAG_ABUSE_SET_DMA_MODE |
IDE_HFLAG_OFF_BOARD,
.pio_mask = ATA_PIO4,
Index: b/drivers/ide/pci/hpt34x.c
===================================================================
--- a/drivers/ide/pci/hpt34x.c
+++ b/drivers/ide/pci/hpt34x.c
@@ -131,6 +131,7 @@ static void __devinit init_hwif_hpt34x(i
#define IDE_HFLAGS_HPT34X \
(IDE_HFLAG_NO_ATAPI_DMA | \
+ IDE_HFLAG_NO_DSC | \
IDE_HFLAG_ABUSE_SET_DMA_MODE | \
IDE_HFLAG_NO_AUTODMA)
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1098,6 +1098,8 @@ enum {
IDE_HFLAG_CY82C693 = (1 << 27),
/* force host out of "simplex" mode */
IDE_HFLAG_CLEAR_SIMPLEX = (1 << 28),
+ /* DSC overlap is unsupported */
+ IDE_HFLAG_NO_DSC = (1 << 29),
};
#ifdef CONFIG_BLK_DEV_OFFBOARD
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
