Just curious - can you fax from applications? Personally I never tried it - I do it the "old fashioned" way - from the scanner glass or ADF.
On Sun, 30 Aug 2015 18:07:02 +0300 David Suna <da...@davidsconsultants.com> wrote: > Thanks that works. Still not sure why I cannot find the scanner using > sane. That would allow scanning directly into applications (like > GIMP) rather than scanning in the browser and saving the file and > opening it in the program. > > On 08/30/2015 06:02 PM, Shlomo Solomon wrote: > I have an HP 8610, but I assume the drivers and interface are similar. > > In fact, I didn't even bother installing anything. If you go to > http://"your-printer-IP" you get a very nice web interface to setup > all aspects o the printer/scanner/fax. > > In addition, if you chose SCAN from the menu, under Scan to Computer > you'll find something called WEBSCAN which allows you to control the > scanner from your browser. > > Hope this helps > > > > On Sun, 30 Aug 2015 15:35:22 +0300 > Efraim Flashner <efr...@flashner.co.il> wrote: > > On my system using debian I installed hplip and ran hp-setup from the > command line and that's how I dealt with my hp all-in-one. > > On Sun, Aug 30, 2015 at 02:33:46PM +0300, David Suna wrote: > <html style="direction: ltr;"> > <head> > > <meta http-equiv="content-type" content="text/html; > charset=utf-8"> <style type="text/css">body p { margin-bottom: 0cm; > margin-top: 0pt; } </style> </head> > <body style="direction: ltr;" bidimailui-charset-is-forced="true" > text="#000000" bgcolor="#FFFFFF"> > I recently purchased a new HP All-in-one machine model 3835. I > checked on <a class="moz-txt-link-freetext" > href="http://hplipopensource.com/">http://hplipopensource.com/</a> > and the model is listed as having full Linux support. I am running > Debian 8.1. I am able to print. However, when I run scanimage -L it > does not find the scanner at all. I tried adding the IP address of > the device to the net.conf file in /etc/sane.d and when I run > scanimage -L with debug messages I get the following:<br> > SANE_DEBUG_NET=255 scanimage -L<br> [sanei_debug] Setting debug > level of net to 255.<br> [net] sane_init: authorize != null, > version_code != null<br> [net] sane_init: SANE net backend version > 1.0.14 (AF-indep+IPv6) from sane-backends 1.0.24<br> > [net] sane_init: Client has little endian byte order<br> > [net] sane_init: searching for config file<br> > [net] sane_init: trying to add 10.0.0.24<br> > [net] add_device: adding backend 10.0.0.24<br> > [net] net_avahi_browse_callback: CACHE_EXHAUSTED<br> > [net] add_device: backend 10.0.0.24 added<br> > [net] sane_init: done reading config<br> > [net] sane_init: evaluating environment variable > SANE_NET_HOSTS<br> [net] sane_init: evaluating environment variable > SANE_NET_TIMEOUT<br> [net] sane_init: done<br> > [net] sane_get_devices: local_only = 0<br> > [net] connect_dev: trying to connect to 10.0.0.24<br> > [net] connect_dev: [0] failed to connect (Connection > refused)<br> [net] connect_dev: couldn't connect to host (see > messages above)<br> [net] sane_get_devices: ignoring failure to > connect to 10.0.0.24<br> [net] sane_get_devices: finished (0 > devices)<br> [net] net_avahi_browse_callback: ALL_FOR_NOW<br> > <br> > I tried to search for solutions but haven't found anything. > Anyone have any solutions or suggestions of where to look?<br> > <br> > Thanks,<br> > <pre class="moz-signature" cols="72">-- > David Suna > <a class="moz-txt-link-abbreviated" > href="mailto:da...@davidsconsultants.com">da...@davidsconsultants.com</a></pre> > </body> </html> > > > _______________________________________________ > Linux-il mailing list > Linux-il@cs.huji.ac.il > http://mailman.cs.huji.ac.il/mailman/listinfo/linux-il > > > > > > -- Shlomo Solomon http://the-solomons.net Sent by Claws Mail 3.11.1 - KDE 4.12.15 - LINUX Mageia 4 _______________________________________________ Linux-il mailing list Linux-il@cs.huji.ac.il http://mailman.cs.huji.ac.il/mailman/listinfo/linux-il