On Monday 02 February 2015 15:27:55 Pali Rohár wrote:
> On Monday 02 February 2015 11:49:58 Pali Rohár wrote:
> > On Monday 02 February 2015 06:49:31 Dmitry Torokhov wrote:
> > > On Sun, Jan 18, 2015 at 10:47:06AM +0100, Pali Rohár wrote:
> > > > On Sunday 18 January 2015 08:22:45 Dmitry Torokhov wrote:
> > > > > On Sat, Jan 17, 2015 at 11:01:56AM +0100, Pali Rohár
wrote:
> > > > > > On Thursday 15 January 2015 22:02:16 Dmitry Torokhov
> >
> > wrote:
> > > > > > > On Thu, Jan 15, 2015 at 09:28:41PM +0100, Pali
> > > > > > > Rohár
> >
> > wrote:
> > > > > > > > On Thursday 15 January 2015 20:38:18 Dmitry
> > > > > > > > Torokhov
> > > >
> > > > wrote:
> > > > > > > > > On Thu, Jan 15, 2015 at 08:19:59PM +0100, Pali
> > > > > > > > > Rohár
> > > >
> > > > wrote:
> > > > > > > > > > On Thursday 15 January 2015 19:18:20 Dmitry
> > > > > > > > > > Torokhov
> > > > > >
> > > > > > wrote:
> > > > > > > > > > > On Thu, Jan 15, 2015 at 11:49:32AM +0100,
> > > > > > > > > > > Pali Rohár
> > > > > >
> > > > > > wrote:
> > > > > > > > > > > > On Wednesday 14 January 2015 23:55:48
> > > > > > > > > > > > Dmitry Torokhov
> > > > > > > >
> > > > > > > > wrote:
> > > > > > > > > > > > > Hi Pali,
> > > > > > > > > > > > >
> > > > > > > > > > > > > This series try to address the issue
> > > > > > > > > > > > > you brought regarding trackstick
> > > > > > > > > > > > > initialization on Dell Latitudes in a
> > > > > > > > > > > > > different way than the patches you
> > > > > > > > > > > > > proposed. Basically in this series we
> > > > > > > > > > > > > move resetting and all detection in
> > > > > > > > > > > > > alps_detect() and make sure we keep
> > > > > > > > > > > > > the state so alps_init() can reuse it
> > > > > > > > > > > > > and not perform the detection all
> > > > > > > > > > > > > over again. Doing this allows us to
> > > > > > > > > > > > > set up device characteristics (name,
> > > > > > > > > > > > > version, etc) properly from the get
> > > > > > > > > > > > > go while still performing reset only
> > > > > > > > > > > > > once.
> > > > > > > > > > > > >
> > > > > > > > > > > > > This is untested as I do not have any
> > > > > > > > > > > > > ALPS devices anymore so I'd appreciate
> > > > > > > > > > > > > you giving it a spin.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Thanks!
> > > > > > > > > > > >
> > > > > > > > > > > > Hi Dmitry,
> > > > > > > > > > > >
> > > > > > > > > > > > on top of which branch/repository should
> > > > > > > > > > > > I apply your patches?
> > > > > > > > > > >
> > > > > > > > > > > Should be applicable to my 'next' branch
> > > > > > > > > > > (which I just upreved to 3.19-rc4).
> > > > > > > > > > >
> > > > > > > > > > > Thanks.
> > > > > > > > > >
> > > > > > > > > > Not working at top of next (0c3e994).
> > > > > > > > > >
> > > > > > > > > > Applying: Input: ALPS - renumber protocol
> > > > > > > > > > numbers Applying: Input: ALPS - make
> > > > > > > > > > Rushmore a separate protocol error: patch
> > > > > > > > > > failed: drivers/input/mouse/alps.c:1275
> > > > > > > > > > error: drivers/input/mouse/alps.c: patch
> > > > > > > > > > does not apply Patch failed at 0002 Input:
> > > > > > > > > > ALPS - make Rushmore a separate protocol
> > > > > > > > >
> > > > > > > > > Hmm.. I created a new alps branch (based on
> > > > > > > > > 3.19-rc4), can you try it?
> > > > > > > > >
> > > > > > > > > Thanks.
> > > > > > > >
> > > > > > > > Compiled from your new alps branch (with "if
> > > > > > > > (!priv)" fix) and modprobing psmouse.ko caused
> > > > > > > > laptop freeze :-( Even sysrq not responded. So
> > > > > > > > something is not working...
> > > > > > >
> > > > > > > Hmm, is it on text console or in X? Any chance you
> > > > > > > could go through pathes - there are only 8 of them
> > > > > > > including 2 of yours that should be unmodified.
> > > > > > >
> > > > > > > Thanks.
> > > > > >
> > > > > > Hi, now I tested patch by patch and kernel crash is
> > > > > > caused only by last patch 6/6 and only after I touch
> > > > > > touchpad or trackstick.
> > > > > >
> > > > > > In text console it prints lot of panic messages and
> > > > > > because it prints lot of messages I cannot read (or
> > > > > > record) more then last.
> > > > > >
> > > > > > In last call trace I see that
> > > > > > alps_register_bare_ps2_mouse() was called and it
> > > > > > generated page_fault.
> > > > >
> > > > > That happens because while you added priv->psmouse
> > > > > pointer it looks like you forgot to initialize it and
> > > > > I missed that too...
> > > >
> > > > Right your patch 6/6 does not initialize priv->psmouse.
> > > > I looked into my original patch and it initialize it,
> > > > so there was some copy-paste error.
> > > >
> > > > Look at other emails... can you fix problems and send
> > > > new version of your patches for testing?
> > >
> > > I think I did. Can you please take another look at my alps
> > > branch?
> > >
> > > Thanks!
> >
> > Now I tried it. It does not crash anymore which is good. But
> > it does not working. Driver alsp.c receive only bare PS/2
> > packets, not 6 bites ALPS packets. So ALPS touchpad is not
> > properly initialized and so is in "legacy" mode when it act
> > as genetic mouse. And events are sent via dev3 device (that
> > PS/2 mouse).
> >
> > So your patches do not initialize my ALPS touchpad
> > correctly.
>
> Hello Dmitry, I found where is problem.
>
> This chunk is needed:
>
> @@ -135,7 +135,7 @@ static const struct alps_protocol_info
> alps_v3_protocol_data = { };
>
> static const struct alps_protocol_info alps_v3_rushmore_data
> = { - ALPS_PROTO_V3, 0x8f, 0x8f, ALPS_DUALPOINT
> + ALPS_PROTO_V3_RUSHMORE, 0x8f, 0x8f, ALPS_DUALPOINT
> };
>
> static const struct alps_protocol_info alps_v5_protocol_data
> = {
>
> because rushmore is now separate protocol.
>
> And maybe also these two chunks are needed too:
>
> @@ -663,7 +696,8 @@ static void
> alps_process_touchpad_packet_v3_v5(struct psmouse *psmouse)
> */
> if (f->is_mp) {
> fingers = f->fingers;
> - if (priv->proto_version == ALPS_PROTO_V3) {
> + if (priv->proto_version == ALPS_PROTO_V3 ||
> + priv->proto_version == ALPS_PROTO_V3_RUSHMORE) {
> if (alps_process_bitmap(priv, f) == 0)
> fingers = 0; /* Use st data */
>
> @@ -1365,8 +1399,9 @@ static psmouse_ret_t
> alps_process_byte(struct psmouse *psmouse) psmouse->pktcnt -
> 1,
> psmouse->packet[psmouse->pktcnt - 1]);
>
> - if (priv->proto_version == ALPS_PROTO_V3_RUSHMORE &&
> - psmouse->pktcnt == psmouse->pktsize) {
> + if ((priv->proto_version == ALPS_PROTO_V3 ||
> + priv->proto_version == ALPS_PROTO_V3_RUSHMORE
> + ) && psmouse->pktcnt == psmouse->pktsize) {
> /*
> * Some Dell boxes, such as Latitude E6440 or E7440
> * with closed lid, quite often smash last byte of
>
>
> With all these tree parts, initialization of my ALPS touchpad
> is OK and working as expected. I compared PS/2 init commands
> and are same as on 3.13 kernel.
Dmitry, will you prepare v2 series of patches?-- Pali Rohár pali.ro...@gmail.com
signature.asc
Description: This is a digitally signed message part.
