This patch adds basic support for the Logitech G920 wheel when in HID
mode. This wheel 'speaks' the HID++ protocol, and therefor is driven
with hid-logitech-hidpp.

At this stage the driver only shows that it can communicate with the
wheel by outputting the name discovered over HID++.

The normal HID functions work to give input functionality using
joystick/event interface.
---
 drivers/hid/hid-core.c           |  1 +
 drivers/hid/hid-ids.h            |  1 +
 drivers/hid/hid-logitech-hidpp.c | 69 +++++++++++++++++++++++++++++++---------
 3 files changed, 56 insertions(+), 15 deletions(-)

diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 70a11ac..fe53b0a 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1896,6 +1896,7 @@ static const struct hid_device_id 
hid_have_special_driver[] = {
        { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 
USB_DEVICE_ID_LOGITECH_RUMBLEPAD_CORD) },
        { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 
USB_DEVICE_ID_LOGITECH_RUMBLEPAD) },
        { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 
USB_DEVICE_ID_LOGITECH_RUMBLEPAD2_2) },
+       { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 
USB_DEVICE_ID_LOGITECH_G920_WHEEL) },
        { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 
USB_DEVICE_ID_LOGITECH_WINGMAN_F3D) },
        { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 
USB_DEVICE_ID_LOGITECH_WINGMAN_FFG ) },
        { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 
USB_DEVICE_ID_LOGITECH_FORCE3D_PRO) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index f769208..d3500c4 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -614,6 +614,7 @@
 #define USB_DEVICE_ID_LOGITECH_RUMBLEPAD2      0xc218
 #define USB_DEVICE_ID_LOGITECH_RUMBLEPAD2_2    0xc219
 #define USB_DEVICE_ID_LOGITECH_G29_WHEEL       0xc24f
+#define USB_DEVICE_ID_LOGITECH_G920_WHEEL      0xc262
 #define USB_DEVICE_ID_LOGITECH_WINGMAN_F3D     0xc283
 #define USB_DEVICE_ID_LOGITECH_FORCE3D_PRO     0xc286
 #define USB_DEVICE_ID_LOGITECH_FLIGHT_SYSTEM_G940      0xc287
diff --git a/drivers/hid/hid-logitech-hidpp.c b/drivers/hid/hid-logitech-hidpp.c
index c343b23..76d7267 100644
--- a/drivers/hid/hid-logitech-hidpp.c
+++ b/drivers/hid/hid-logitech-hidpp.c
@@ -43,10 +43,12 @@ MODULE_PARM_DESC(disable_raw_mode,
 
 #define HIDPP_QUIRK_CLASS_WTP                  BIT(0)
 #define HIDPP_QUIRK_CLASS_M560                 BIT(1)
+#define HIDPP_QUIRK_CLASS_G920                 BIT(2)
 
 /* bits 2..20 are reserved for classes */
 #define HIDPP_QUIRK_DELAYED_INIT               BIT(21)
 #define HIDPP_QUIRK_WTP_PHYSICAL_BUTTONS       BIT(22)
+#define HIDPP_QUIRK_FORCE_OUTPUT_REPORTS       BIT(23)
 
 /*
  * There are two hidpp protocols in use, the first version hidpp10 is known
@@ -136,8 +138,11 @@ static void hidpp_connect_event(struct hidpp_device 
*hidpp_dev);
 static int __hidpp_send_report(struct hid_device *hdev,
                                struct hidpp_report *hidpp_report)
 {
+       struct hidpp_device *hidpp = hid_get_drvdata(hdev);
        int fields_count, ret;
 
+       hidpp = hid_get_drvdata(hdev);
+
        switch (hidpp_report->report_id) {
        case REPORT_ID_HIDPP_SHORT:
                fields_count = HIDPP_REPORT_SHORT_LENGTH;
@@ -158,9 +163,13 @@ static int __hidpp_send_report(struct hid_device *hdev,
         */
        hidpp_report->device_index = 0xff;
 
-       ret = hid_hw_raw_request(hdev, hidpp_report->report_id,
-               (u8 *)hidpp_report, fields_count, HID_OUTPUT_REPORT,
-               HID_REQ_SET_REPORT);
+       if (hidpp->quirks & HIDPP_QUIRK_FORCE_OUTPUT_REPORTS) {
+               ret = hid_hw_output_report(hdev, (u8 *)hidpp_report, 
fields_count);
+       } else {
+               ret = hid_hw_raw_request(hdev, hidpp_report->report_id,
+                       (u8 *)hidpp_report, fields_count, HID_OUTPUT_REPORT,
+                       HID_REQ_SET_REPORT);
+       }
 
        return ret == fields_count ? 0 : -1;
 }
@@ -1305,8 +1314,10 @@ static void hidpp_overwrite_name(struct hid_device 
*hdev, bool use_unifying)
 
        if (!name)
                hid_err(hdev, "unable to retrieve the name of the device");
-       else
+       else {
+               dbg_hid("HID++: Got name: %s\n", name);
                snprintf(hdev->name, sizeof(hdev->name), "%s", name);
+       }
 
        kfree(name);
 }
@@ -1457,6 +1468,25 @@ static int hidpp_probe(struct hid_device *hdev, const 
struct hid_device_id *id)
                goto hid_parse_fail;
        }
 
+       if (hidpp->quirks & HIDPP_QUIRK_DELAYED_INIT)
+               connect_mask &= ~HID_CONNECT_HIDINPUT;
+
+       if (hidpp->quirks & HIDPP_QUIRK_CLASS_G920) {
+               ret = hid_hw_start(hdev, connect_mask);
+               if (ret) {
+                       hid_err(hdev, "hw start failed\n");
+                       goto hid_hw_start_fail;
+               }
+               ret = hid_hw_open(hdev);
+               if (ret < 0) {
+                       dev_err(&hdev->dev, "%s:hid_hw_open returned 
error:%d\n",
+                               __func__, ret);
+                       hid_hw_stop(hdev);
+                       goto hid_hw_start_fail;
+               }
+       }
+
+
        /* Allow incoming packets */
        hid_device_io_start(hdev);
 
@@ -1465,8 +1495,7 @@ static int hidpp_probe(struct hid_device *hdev, const 
struct hid_device_id *id)
                if (!connected) {
                        ret = -ENODEV;
                        hid_err(hdev, "Device not connected");
-                       hid_device_io_stop(hdev);
-                       goto hid_parse_fail;
+                       goto hid_hw_open_failed;
                }
 
                hid_info(hdev, "HID++ %u.%u device connected.\n",
@@ -1479,19 +1508,18 @@ static int hidpp_probe(struct hid_device *hdev, const 
struct hid_device_id *id)
        if (connected && (hidpp->quirks & HIDPP_QUIRK_CLASS_WTP)) {
                ret = wtp_get_config(hidpp);
                if (ret)
-                       goto hid_parse_fail;
+                       goto hid_hw_open_failed;
        }
 
        /* Block incoming packets */
        hid_device_io_stop(hdev);
 
-       if (hidpp->quirks & HIDPP_QUIRK_DELAYED_INIT)
-               connect_mask &= ~HID_CONNECT_HIDINPUT;
-
-       ret = hid_hw_start(hdev, connect_mask);
-       if (ret) {
-               hid_err(hdev, "%s:hid_hw_start returned error\n", __func__);
-               goto hid_hw_start_fail;
+       if (!(hidpp->quirks & HIDPP_QUIRK_CLASS_G920)) {
+               ret = hid_hw_start(hdev, connect_mask);
+               if (ret) {
+                       hid_err(hdev, "%s:hid_hw_start returned error\n", 
__func__);
+                       goto hid_hw_start_fail;
+               }
        }
 
        if (hidpp->quirks & HIDPP_QUIRK_DELAYED_INIT) {
@@ -1503,6 +1531,12 @@ static int hidpp_probe(struct hid_device *hdev, const 
struct hid_device_id *id)
 
        return ret;
 
+hid_hw_open_failed:
+       hid_device_io_stop(hdev);
+       if (hidpp->quirks & HIDPP_QUIRK_CLASS_G920) {
+               hid_hw_close(hdev);
+               hid_hw_stop(hdev);
+       }
 hid_hw_start_fail:
 hid_parse_fail:
        cancel_work_sync(&hidpp->work);
@@ -1516,9 +1550,11 @@ static void hidpp_remove(struct hid_device *hdev)
 {
        struct hidpp_device *hidpp = hid_get_drvdata(hdev);
 
+       if (hidpp->quirks & HIDPP_QUIRK_CLASS_G920)
+               hid_hw_close(hdev);
+       hid_hw_stop(hdev);
        cancel_work_sync(&hidpp->work);
        mutex_destroy(&hidpp->send_mutex);
-       hid_hw_stop(hdev);
 }
 
 static const struct hid_device_id hidpp_devices[] = {
@@ -1542,6 +1578,9 @@ static const struct hid_device_id hidpp_devices[] = {
 
        { HID_DEVICE(BUS_USB, HID_GROUP_LOGITECH_DJ_DEVICE,
                USB_VENDOR_ID_LOGITECH, HID_ANY_ID)},
+
+       { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, 
USB_DEVICE_ID_LOGITECH_G920_WHEEL),
+               .driver_data = HIDPP_QUIRK_CLASS_G920 | 
HIDPP_QUIRK_FORCE_OUTPUT_REPORTS},
        {}
 };
 
-- 
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to