Hi all, With Linux 2.6.30 the BTTV driver for my WinTV card claims
bttv0: audio absent, no audio device found!
and audio does not work. This worked up to and including 2.6.29. Is this a
known issue? Does anyone have a fix or a patch for me to try?
Cheers,
- Udo
Output for 2.6.29:
------------------
Linux video capture interface: v2.00
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv 0000:06:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
bttv0: Bt878 (rev 2) at 0000:06:00.0, irq: 21, latency: 32, mmio: 0x50001000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: Hauppauge (bt878) [card=10,autodetected]
IRQ 21/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
tuner' 0-0042: chip found @ 0x84 (bt878 #0 [sw])
tda9887 0-0042: creating new instance
tda9887 0-0042: tda988[5/6/7] found
tuner' 0-0061: chip found @ 0xc2 (bt878 #0 [sw])
tveeprom 0-0050: Hauppauge model 37284, rev B221, serial# 3546046
tveeprom 0-0050: tuner model is Philips FM1216 (idx 21, type 5)
tveeprom 0-0050: TV standards PAL(B/G) (eeprom 0x04)
tveeprom 0-0050: audio processor is MSP3410D (idx 5)
tveeprom 0-0050: has radio
bttv0: Hauppauge eeprom indicates model#37284
bttv0: tuner type=5
tuner-simple 0-0061: creating new instance
tuner-simple 0-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
Output for 2.6.30:
------------------
Linux video capture interface: v2.00
bttv: driver version 0.9.18 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
bttv 0000:06:00.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
bttv0: Bt878 (rev 2) at 0000:06:00.0, irq: 21, latency: 32, mmio: 0x50001000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: Hauppauge (bt878) [card=10,autodetected]
IRQ 21/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
tveeprom 1-0050: Hauppauge model 37284, rev B221, serial# 3546046
tveeprom 1-0050: tuner model is Philips FM1216 (idx 21, type 5)
tveeprom 1-0050: TV standards PAL(B/G) (eeprom 0x04)
tveeprom 1-0050: audio processor is MSP3410D (idx 5)
tveeprom 1-0050: has radio
bttv0: Hauppauge eeprom indicates model#37284
bttv0: tuner type=5
tuner 1-0042: chip found @ 0x84 (bt878 #0 [sw])
tda9887 1-0042: creating new instance
tda9887 1-0042: tda988[5/6/7] found
tuner 1-0061: chip found @ 0xc2 (bt878 #0 [sw])
tuner-simple 1-0061: creating new instance
tuner-simple 1-0061: type set to 5 (Philips PAL_BG (FI1216 and compatibles))
bttv0: audio absent, no audio device found!
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
--
Dipl.-Inf. Udo Steinberg
Technische Universität Dresden http://os.inf.tu-dresden.de/~us15
Institute for System Architecture Tel: +49 351 463 38401
D-01062 Dresden Fax: +49 351 463 38284
signature.asc
Description: PGP signature
