Hi Ramiro,
On 02/17/2017 03:14 PM, Ramiro Oliveira wrote:
> Create device tree bindings documentation.
>
> Signed-off-by: Ramiro Oliveira <roliv...@synopsys.com>
> Acked-by: Rob Herring <r...@kernel.org>
> ---
> .../devicetree/bindings/media/i2c/ov5647.txt | 35
> ++++++++++++++++++++++
> 1 file changed, 35 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5647.txt
>
> diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.txt
> b/Documentation/devicetree/bindings/media/i2c/ov5647.txt
> new file mode 100644
> index 000000000000..31956426d3b9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/i2c/ov5647.txt
> @@ -0,0 +1,35 @@
> +Omnivision OV5647 raw image sensor
> +---------------------------------
> +
> +OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces
> +and CCI (I2C compatible) control bus.
> +
> +Required properties:
> +
> +- compatible : "ovti,ov5647".
> +- reg : I2C slave address of the sensor.
> +- clocks : Reference to the xclk clock.
Is "xclk" clock a pixel clock or something else?
> +- clock-names : Should be "xclk".
You can remove this property, because there is only one source clock.
> +- clock-frequency : Frequency of the xclk clock.
And after the last updates in the driver this property can be removed as well.
> +
> +The common video interfaces bindings (see video-interfaces.txt) should be
> +used to specify link to the image data receiver. The OV5647 device
> +node should contain one 'port' child node with an 'endpoint' subnode.
> +
> +Example:
> +
> + i2c@2000 {
> + ...
> + ov: camera@36 {
> + compatible = "ovti,ov5647";
> + reg = <0x36>;
> + clocks = <&camera_clk>;
> + clock-names = "xclk";
> + clock-frequency = <25000000>;
When you remove two unused properties, please don't forget to update the
example.
> + port {
> + camera_1: endpoint {
> + remote-endpoint = <&csi1_ep1>;
> + };
> + };
> + };
> + };
>
--
With best wishes,
Vladimir
