On Mon, Feb 20, 2017 at 6:38 AM, Marek Szyprowski
<m.szyprow...@samsung.com> wrote:
> To complete DMA memory configuration for MFC device, allocation of the
> firmware buffer is needed, because some parameters are dependant on its base
> address. Till now, this has been handled in the s5p_mfc_alloc_firmware()
> function. This patch moves that logic to s5p_mfc_configure_dma_memory() to
> keep DMA memory related operations in a single place. This way
> s5p_mfc_alloc_firmware() is simplified and does what it name says. The
> other consequence of this change is moving s5p_mfc_alloc_firmware() call
> from the s5p_mfc_probe() function to the s5p_mfc_configure_dma_memory().
Overall looks good. This patch makes subtle change in the dma and firwmare
initialization sequence. Might be okay, but wanted to call out just in case,
Before this change:
vb2_dma_contig_set_max_seg_size() is done for both iommu and non-iommu
case before s5p_mfc_alloc_firmware(). With this change setting
dma_contig max size happens after s5p_mfc_alloc_firmware(). From what
I can tell this might not be an issue.
vb2_dma_contig_clear_max_seg_size() still happens after
s5p_mfc_release_firmware(), so that part hasn't changed.
Do any of the dma_* calls made from s5p_mfc_alloc_firmware() and later
during the dma congiguration sequence depend on dmap_parms being
allocated? Doesn't looks like it from what I can tell, but safe to
ask.
thanks,
-- Shuah
>
> Signed-off-by: Marek Szyprowski <m.szyprow...@samsung.com>
> ---
> drivers/media/platform/s5p-mfc/s5p_mfc.c | 62
> +++++++++++++++++++++------
> drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c | 31 --------------
> 2 files changed, 49 insertions(+), 44 deletions(-)
>
> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c
> b/drivers/media/platform/s5p-mfc/s5p_mfc.c
> index bc1aeb25ebeb..4403487a494a 100644
> --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c
> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c
> @@ -1110,6 +1110,11 @@ static struct device *s5p_mfc_alloc_memdev(struct
> device *dev,
> static int s5p_mfc_configure_dma_memory(struct s5p_mfc_dev *mfc_dev)
> {
> struct device *dev = &mfc_dev->plat_dev->dev;
> + void *bank2_virt;
> + dma_addr_t bank2_dma_addr;
> + unsigned long align_size = 1 << MFC_BASE_ALIGN_ORDER;
> + struct s5p_mfc_priv_buf *fw_buf = &mfc_dev->fw_buf;
> + int ret;
>
> /*
> * When IOMMU is available, we cannot use the default configuration,
> @@ -1122,14 +1127,21 @@ static int s5p_mfc_configure_dma_memory(struct
> s5p_mfc_dev *mfc_dev)
> if (exynos_is_iommu_available(dev)) {
> int ret = exynos_configure_iommu(dev, S5P_MFC_IOMMU_DMA_BASE,
> S5P_MFC_IOMMU_DMA_SIZE);
> - if (ret == 0) {
> - mfc_dev->mem_dev[BANK1_CTX] =
> - mfc_dev->mem_dev[BANK2_CTX] = dev;
> - vb2_dma_contig_set_max_seg_size(dev,
> - DMA_BIT_MASK(32));
> + if (ret)
> + return ret;
> +
> + mfc_dev->mem_dev[BANK1_CTX] = mfc_dev->mem_dev[BANK2_CTX] =
> dev;
> + ret = s5p_mfc_alloc_firmware(mfc_dev);
> + if (ret) {
> + exynos_unconfigure_iommu(dev);
> + return ret;
> }
>
> - return ret;
> + mfc_dev->dma_base[BANK1_CTX] = fw_buf->dma;
> + mfc_dev->dma_base[BANK2_CTX] = fw_buf->dma;
> + vb2_dma_contig_set_max_seg_size(dev, DMA_BIT_MASK(32));
> +
> + return 0;
> }
>
> /*
> @@ -1147,6 +1159,35 @@ static int s5p_mfc_configure_dma_memory(struct
> s5p_mfc_dev *mfc_dev)
> return -ENODEV;
> }
>
> + /* Allocate memory for firmware and initialize both banks addresses */
> + ret = s5p_mfc_alloc_firmware(mfc_dev);
> + if (ret) {
> + device_unregister(mfc_dev->mem_dev[BANK2_CTX]);
> + device_unregister(mfc_dev->mem_dev[BANK1_CTX]);
> + return ret;
> + }
> +
> + mfc_dev->dma_base[BANK1_CTX] = fw_buf->dma;
> +
> + bank2_virt = dma_alloc_coherent(mfc_dev->mem_dev[BANK2_CTX],
> align_size,
> + &bank2_dma_addr, GFP_KERNEL);
> + if (!bank2_virt) {
> + mfc_err("Allocating bank2 base failed\n");
> + s5p_mfc_release_firmware(mfc_dev);
> + device_unregister(mfc_dev->mem_dev[BANK2_CTX]);
> + device_unregister(mfc_dev->mem_dev[BANK1_CTX]);
> + return -ENOMEM;
> + }
> +
> + /* Valid buffers passed to MFC encoder with LAST_FRAME command
> + * should not have address of bank2 - MFC will treat it as a null
> frame.
> + * To avoid such situation we set bank2 address below the pool
> address.
> + */
> + mfc_dev->dma_base[BANK2_CTX] = bank2_dma_addr - align_size;
> +
> + dma_free_coherent(mfc_dev->mem_dev[BANK2_CTX], align_size, bank2_virt,
> + bank2_dma_addr);
> +
> vb2_dma_contig_set_max_seg_size(mfc_dev->mem_dev[BANK1_CTX],
> DMA_BIT_MASK(32));
> vb2_dma_contig_set_max_seg_size(mfc_dev->mem_dev[BANK2_CTX],
> @@ -1159,6 +1200,8 @@ static void s5p_mfc_unconfigure_dma_memory(struct
> s5p_mfc_dev *mfc_dev)
> {
> struct device *dev = &mfc_dev->plat_dev->dev;
>
> + s5p_mfc_release_firmware(mfc_dev);
> +
> if (exynos_is_iommu_available(dev)) {
> exynos_unconfigure_iommu(dev);
> vb2_dma_contig_clear_max_seg_size(dev);
> @@ -1235,10 +1278,6 @@ static int s5p_mfc_probe(struct platform_device *pdev)
> dev->watchdog_timer.data = (unsigned long)dev;
> dev->watchdog_timer.function = s5p_mfc_watchdog;
>
> - ret = s5p_mfc_alloc_firmware(dev);
> - if (ret)
> - goto err_res;
> -
> ret = v4l2_device_register(&pdev->dev, &dev->v4l2_dev);
> if (ret)
> goto err_v4l2_dev_reg;
> @@ -1313,8 +1352,6 @@ static int s5p_mfc_probe(struct platform_device *pdev)
> err_dec_alloc:
> v4l2_device_unregister(&dev->v4l2_dev);
> err_v4l2_dev_reg:
> - s5p_mfc_release_firmware(dev);
> -err_res:
> s5p_mfc_final_pm(dev);
> err_dma:
> s5p_mfc_unconfigure_dma_memory(dev);
> @@ -1356,7 +1393,6 @@ static int s5p_mfc_remove(struct platform_device *pdev)
> video_device_release(dev->vfd_enc);
> video_device_release(dev->vfd_dec);
> v4l2_device_unregister(&dev->v4l2_dev);
> - s5p_mfc_release_firmware(dev);
> s5p_mfc_unconfigure_dma_memory(dev);
>
> s5p_mfc_final_pm(dev);
> diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
> b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
> index 50d698968049..b0cf3970117a 100644
> --- a/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
> +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_ctrl.c
> @@ -26,9 +26,6 @@
> /* Allocate memory for firmware */
> int s5p_mfc_alloc_firmware(struct s5p_mfc_dev *dev)
> {
> - void *bank2_virt;
> - dma_addr_t bank2_dma_addr;
> - unsigned int align_size = 1 << MFC_BASE_ALIGN_ORDER;
> struct s5p_mfc_priv_buf *fw_buf = &dev->fw_buf;
>
> fw_buf->size = dev->variant->buf_size->fw;
> @@ -44,35 +41,7 @@ int s5p_mfc_alloc_firmware(struct s5p_mfc_dev *dev)
> mfc_err("Allocating bitprocessor buffer failed\n");
> return -ENOMEM;
> }
> - dev->dma_base[BANK1_CTX] = fw_buf->dma;
> -
> - if (HAS_PORTNUM(dev) && IS_TWOPORT(dev)) {
> - bank2_virt = dma_alloc_coherent(dev->mem_dev[BANK2_CTX],
> - align_size, &bank2_dma_addr,
> GFP_KERNEL);
> -
> - if (!bank2_virt) {
> - mfc_err("Allocating bank2 base failed\n");
> - dma_free_coherent(dev->mem_dev[BANK1_CTX],
> fw_buf->size,
> - fw_buf->virt, fw_buf->dma);
> - fw_buf->virt = NULL;
> - return -ENOMEM;
> - }
> -
> - /* Valid buffers passed to MFC encoder with LAST_FRAME command
> - * should not have address of bank2 - MFC will treat it as a
> null frame.
> - * To avoid such situation we set bank2 address below the
> pool address.
> - */
> - dev->dma_base[BANK2_CTX] = bank2_dma_addr - align_size;
>
> - dma_free_coherent(dev->mem_dev[BANK2_CTX], align_size,
> - bank2_virt, bank2_dma_addr);
> -
> - } else {
> - /* In this case bank2 can point to the same address as bank1.
> - * Firmware will always occupy the beginning of this area so
> it is
> - * impossible having a video frame buffer with zero address.
> */
> - dev->dma_base[BANK2_CTX] = dev->dma_base[BANK1_CTX];
> - }
> return 0;
> }
>
> --
> 1.9.1
>
