As warned by kbuild test robot:
warning: (VIDEO_EM28XX_V4L2) selects VIDEO_OV2640 which has unmet
direct dependencies (MEDIA_SUPPORT && VIDEO_V4L2 && I2C && GPIOLIB &&
MEDIA_CAMERA_SUPPORT)
The em28xx driver can use ov2640, but it doesn't depend
(or use) the GPIOLIB in order to power off/on the sensor.
So, as we want to allow both usages with and without
GPIOLIB, make its dependency optional.
Reported-by: kbuild test robot <fengguang...@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mche...@s-opensource.com>
---
drivers/media/i2c/Kconfig | 2 +-
drivers/media/i2c/ov2640.c | 5 ++++-
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig
index 40bb4bdc51da..fd181c99ce11 100644
--- a/drivers/media/i2c/Kconfig
+++ b/drivers/media/i2c/Kconfig
@@ -519,7 +519,7 @@ config VIDEO_SMIAPP_PLL
config VIDEO_OV2640
tristate "OmniVision OV2640 sensor support"
- depends on VIDEO_V4L2 && I2C && GPIOLIB
+ depends on VIDEO_V4L2 && I2C
depends on MEDIA_CAMERA_SUPPORT
help
This is a Video4Linux2 sensor-level driver for the OmniVision
diff --git a/drivers/media/i2c/ov2640.c b/drivers/media/i2c/ov2640.c
index d55ca37dc12f..9c00ed3543f8 100644
--- a/drivers/media/i2c/ov2640.c
+++ b/drivers/media/i2c/ov2640.c
@@ -743,13 +743,16 @@ static int ov2640_s_power(struct v4l2_subdev *sd, int on)
struct i2c_client *client = v4l2_get_subdevdata(sd);
struct ov2640_priv *priv = to_ov2640(client);
- gpiod_direction_output(priv->pwdn_gpio, !on);
+#ifdef CONFIG_GPIOLIB
+ if (priv->pwdn_gpio)
+ gpiod_direction_output(priv->pwdn_gpio, !on);
if (on && priv->resetb_gpio) {
/* Active the resetb pin to perform a reset pulse */
gpiod_direction_output(priv->resetb_gpio, 1);
usleep_range(3000, 5000);
gpiod_direction_output(priv->resetb_gpio, 0);
}
+#endif
return 0;
}
--
2.9.3
