Hi Janusz,
Thanks for the patch. A few comments below.
On Fri, Jun 16, 2017 at 12:52:43AM +0200, Janusz Krzysztofik wrote:
> Remove the soc_camera dependencies.
>
> Lost features, fortunately not used or not critical on test platform:
> - soc_camera power on/off callback - replaced with clock enable/disable
> only, no support for platform provided regulators nor power callback,
> - soc_camera sense request - replaced with arbitrarily selected default
> master clock rate and pixel clock limit, no support for platform
> requested values,
> - soc_camera board flags - no support for platform requested mbus config
> tweaks.
>
> Created against linux-4.12-rc2.
> Tested on Amstrad Delta with now out of tree but still locally
> maintained omap1_camera host driver.
>
> Signed-off-by: Janusz Krzysztofik <jmkrzy...@gmail.com>
> ---
> drivers/media/i2c/soc_camera/ov6650.c | 75
> ++++++++++-------------------------
> 1 file changed, 22 insertions(+), 53 deletions(-)
>
> diff --git a/drivers/media/i2c/soc_camera/ov6650.c
> b/drivers/media/i2c/soc_camera/ov6650.c
> index dbd6d92..20defcb88 100644
> --- a/drivers/media/i2c/soc_camera/ov6650.c
> +++ b/drivers/media/i2c/soc_camera/ov6650.c
> @@ -31,9 +31,9 @@
> #include <linux/v4l2-mediabus.h>
> #include <linux/module.h>
>
> -#include <media/soc_camera.h>
> #include <media/v4l2-clk.h>
> #include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
>
> /* Register definitions */
> #define REG_GAIN 0x00 /* range 00 - 3F */
> @@ -426,10 +426,15 @@ static int ov6650_set_register(struct v4l2_subdev *sd,
> static int ov6650_s_power(struct v4l2_subdev *sd, int on)
> {
> struct i2c_client *client = v4l2_get_subdevdata(sd);
> - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
> struct ov6650 *priv = to_ov6650(client);
> + int ret = 0;
>
> - return soc_camera_set_power(&client->dev, ssdd, priv->clk, on);
> + if (on)
> + ret = v4l2_clk_enable(priv->clk);
> + else
> + v4l2_clk_disable(priv->clk);
It'd be nicer to use the clock framework. Although I'm certainly fine with
v4l2_clk for now, one thing at a time...
> +
> + return ret;
> }
>
> static int ov6650_get_selection(struct v4l2_subdev *sd,
> @@ -471,14 +476,13 @@ static int ov6650_set_selection(struct v4l2_subdev *sd,
> sel->target != V4L2_SEL_TGT_CROP)
> return -EINVAL;
>
> - rect.left = ALIGN(rect.left, 2);
> - rect.width = ALIGN(rect.width, 2);
> - rect.top = ALIGN(rect.top, 2);
> - rect.height = ALIGN(rect.height, 2);
> - soc_camera_limit_side(&rect.left, &rect.width,
> - DEF_HSTRT << 1, 2, W_CIF);
> - soc_camera_limit_side(&rect.top, &rect.height,
> - DEF_VSTRT << 1, 2, H_CIF);
> + v4l_bound_align_image(&rect.width, 2, W_CIF, 1,
> + &rect.height, 2, H_CIF, 1, 0);
> + v4l_bound_align_image(&rect.left, DEF_HSTRT << 1,
> + (DEF_HSTRT << 1) + W_CIF - (__s32)rect.width, 1,
> + &rect.top, DEF_VSTRT << 1,
> + (DEF_VSTRT << 1) + H_CIF - (__s32)rect.height, 1,
> + 0);
>
> ret = ov6650_reg_write(client, REG_HSTRT, rect.left >> 1);
> if (!ret) {
> @@ -547,8 +551,6 @@ static u8 to_clkrc(struct v4l2_fract *timeperframe,
> static int ov6650_s_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt
> *mf)
> {
> struct i2c_client *client = v4l2_get_subdevdata(sd);
> - struct soc_camera_device *icd = v4l2_get_subdev_hostdata(sd);
> - struct soc_camera_sense *sense = icd->sense;
> struct ov6650 *priv = to_ov6650(client);
> bool half_scale = !is_unscaled_ok(mf->width, mf->height, &priv->rect);
> struct v4l2_subdev_selection sel = {
> @@ -640,32 +642,10 @@ static int ov6650_s_fmt(struct v4l2_subdev *sd, struct
> v4l2_mbus_framefmt *mf)
> }
> priv->half_scale = half_scale;
>
> - if (sense) {
> - if (sense->master_clock == 8000000) {
> - dev_dbg(&client->dev, "8MHz input clock\n");
> - clkrc = CLKRC_6MHz;
> - } else if (sense->master_clock == 12000000) {
> - dev_dbg(&client->dev, "12MHz input clock\n");
> - clkrc = CLKRC_12MHz;
> - } else if (sense->master_clock == 16000000) {
> - dev_dbg(&client->dev, "16MHz input clock\n");
> - clkrc = CLKRC_16MHz;
> - } else if (sense->master_clock == 24000000) {
> - dev_dbg(&client->dev, "24MHz input clock\n");
> - clkrc = CLKRC_24MHz;
> - } else {
> - dev_err(&client->dev,
> - "unsupported input clock, check platform
> data\n");
> - return -EINVAL;
> - }
> - mclk = sense->master_clock;
> - priv->pclk_limit = sense->pixel_clock_max;
> - } else {
> - clkrc = CLKRC_24MHz;
> - mclk = 24000000;
> - priv->pclk_limit = 0;
> - dev_dbg(&client->dev, "using default 24MHz input clock\n");
> - }
> + clkrc = CLKRC_12MHz;
> + mclk = 12000000;
> + priv->pclk_limit = 1334000;
> + dev_dbg(&client->dev, "using 12MHz input clock\n");
>
> clkrc |= to_clkrc(&priv->tpf, priv->pclk_limit, priv->pclk_max);
>
> @@ -897,8 +877,6 @@ static const struct v4l2_subdev_core_ops ov6650_core_ops
> = {
> static int ov6650_g_mbus_config(struct v4l2_subdev *sd,
> struct v4l2_mbus_config *cfg)
> {
> - struct i2c_client *client = v4l2_get_subdevdata(sd);
> - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
>
> cfg->flags = V4L2_MBUS_MASTER |
> V4L2_MBUS_PCLK_SAMPLE_RISING | V4L2_MBUS_PCLK_SAMPLE_FALLING |
> @@ -906,7 +884,6 @@ static int ov6650_g_mbus_config(struct v4l2_subdev *sd,
> V4L2_MBUS_VSYNC_ACTIVE_HIGH | V4L2_MBUS_VSYNC_ACTIVE_LOW |
> V4L2_MBUS_DATA_ACTIVE_HIGH;
> cfg->type = V4L2_MBUS_PARALLEL;
> - cfg->flags = soc_camera_apply_board_flags(ssdd, cfg);
>
> return 0;
> }
> @@ -916,25 +893,23 @@ static int ov6650_s_mbus_config(struct v4l2_subdev *sd,
> const struct v4l2_mbus_config *cfg)
> {
> struct i2c_client *client = v4l2_get_subdevdata(sd);
> - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
> - unsigned long flags = soc_camera_apply_board_flags(ssdd, cfg);
> int ret;
>
> - if (flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
> + if (cfg->flags & V4L2_MBUS_PCLK_SAMPLE_RISING)
> ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_PCLK_RISING, 0);
> else
> ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_PCLK_RISING);
> if (ret)
> return ret;
>
> - if (flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
> + if (cfg->flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
> ret = ov6650_reg_rmw(client, REG_COMF, COMF_HREF_LOW, 0);
> else
> ret = ov6650_reg_rmw(client, REG_COMF, 0, COMF_HREF_LOW);
> if (ret)
> return ret;
>
> - if (flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
> + if (cfg->flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
> ret = ov6650_reg_rmw(client, REG_COMJ, COMJ_VSYNC_HIGH, 0);
> else
> ret = ov6650_reg_rmw(client, REG_COMJ, 0, COMJ_VSYNC_HIGH);
> @@ -971,14 +946,8 @@ static int ov6650_probe(struct i2c_client *client,
> const struct i2c_device_id *did)
> {
> struct ov6650 *priv;
> - struct soc_camera_subdev_desc *ssdd = soc_camera_i2c_to_desc(client);
> int ret;
>
> - if (!ssdd) {
> - dev_err(&client->dev, "Missing platform_data for driver\n");
> - return -EINVAL;
> - }
> -
> priv = devm_kzalloc(&client->dev, sizeof(*priv), GFP_KERNEL);
> if (!priv) {
> dev_err(&client->dev,
--
Kind regards,
Sakari Ailus
e-mail: sakari.ai...@iki.fi XMPP: sai...@retiisi.org.uk
