On Mon, Sep 18, 2017 at 03:57:21PM +0200, SF Markus Elfring wrote:
> From: Markus Elfring <elfr...@users.sourceforge.net>
> Date: Mon, 18 Sep 2017 13:50:45 +0200
>
> Adjust jump targets so that a bit of exception handling can be better
> reused at the end of this function.
>
> This refactoring might fix also an error situation where the
> function "i2c_unregister_device" was not called after a software failure
> was noticed by the data member "hdl.error".
>
> Signed-off-by: Markus Elfring <elfr...@users.sourceforge.net>
> ---
> drivers/media/usb/go7007/s2250-board.c | 37
> +++++++++++++++++-----------------
> 1 file changed, 18 insertions(+), 19 deletions(-)
>
> diff --git a/drivers/media/usb/go7007/s2250-board.c
> b/drivers/media/usb/go7007/s2250-board.c
> index 1fd4c09dd516..1bd9a7f2e7a3 100644
> --- a/drivers/media/usb/go7007/s2250-board.c
> +++ b/drivers/media/usb/go7007/s2250-board.c
> @@ -510,6 +510,7 @@ static int s2250_probe(struct i2c_client *client,
> u8 *data;
> struct go7007 *go = i2c_get_adapdata(adapter);
> struct go7007_usb *usb = go->hpi_context;
> + int code;
It should be called "int rc" to match the rest of the driver. "ret" or
"err" would also have been acceptable.
>
> audio = i2c_new_dummy(adapter, TLV320_ADDRESS >> 1);
> if (!audio)
> @@ -517,8 +518,8 @@ static int s2250_probe(struct i2c_client *client,
>
> state = kzalloc(sizeof(*state), GFP_KERNEL);
> if (!state) {
> - i2c_unregister_device(audio);
> - return -ENOMEM;
> + code = -ENOMEM;
> + goto unregister_device;
> }
>
> sd = &state->sd;
> @@ -538,11 +539,8 @@ static int s2250_probe(struct i2c_client *client,
> V4L2_CID_HUE, -512, 511, 1, 0);
> sd->ctrl_handler = &state->hdl;
> if (state->hdl.error) {
> - int err = state->hdl.error;
> -
> - v4l2_ctrl_handler_free(&state->hdl);
> - kfree(state);
> - return err;
> + code = state->hdl.error;
> + goto free_handler;
> }
>
> state->std = V4L2_STD_NTSC;
> @@ -555,17 +553,13 @@ static int s2250_probe(struct i2c_client *client,
> /* initialize the audio */
> if (write_regs(audio, aud_regs) < 0) {
> dev_err(&client->dev, "error initializing audio\n");
> - goto fail;
> + goto e_io;
Preserve the error code.
regards,
dan carpenter
