Em Wed, 14 Feb 2018 00:29:43 +0100 "Jasmin J." <jas...@anw.at> escreveu:
> Hi! > > Please hold on in merging this series, because I have to investigate a hint > I got related to the buffer size handshake of the protocol driver: > https://www.linuxtv.org/pipermail/linux-dvb/2007-July/019116.html Ok. I'll mark this series as "Changes requested". Please resubmit it once you have a new patch series. > > BR, > Jasmin > > > On 12/21/2017 02:22 PM, Jasmin J. wrote: > > From: Jasmin Jessich <jas...@anw.at> > > > > Some (older) CAMs are really slow in accepting data. The CI interface > > specification doesn't define a handshake for accepted data. Thus, the > > en50221 protocol driver can't control if a data byte has been correctly > > written to the CAM. > > > > The current implementation writes the length and the data quick after > > each other. Thus, the slow CAMs may generate a WR error, which leads to > > the known error logging > > "CAM tried to send a buffer larger than the ecount size". > > > > To solve this issue the en50221 protocol driver needs to wait some CAM > > depending time between the different bytes to be written. Because the > > time is CAM dependent, an individual value per CAM needs to be set. For > > that SysFS is used in favor of ioctl's to allow the control of the timer > > values independent from any user space application. > > > > This patch adds the timers and the SysFS nodes to set/get the timeout > > values and the timer waiting between the different steps of the CAM write > > access. A timer value of 0 (default) means "no timeout". > > > > Signed-off-by: Jasmin Jessich <jas...@anw.at> > > Acked-by: Ralph Metzler <r...@metzlerbros.de> > > --- > > drivers/media/dvb-core/dvb_ca_en50221.c | 132 > > +++++++++++++++++++++++++++++++- > > 1 file changed, 131 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/media/dvb-core/dvb_ca_en50221.c > > b/drivers/media/dvb-core/dvb_ca_en50221.c > > index a3b2754..9b45d6b 100644 > > --- a/drivers/media/dvb-core/dvb_ca_en50221.c > > +++ b/drivers/media/dvb-core/dvb_ca_en50221.c > > @@ -86,6 +86,13 @@ MODULE_PARM_DESC(cam_debug, "enable verbose debug > > messages"); > > #define DVB_CA_SLOTSTATE_WAITFR 6 > > #define DVB_CA_SLOTSTATE_LINKINIT 7 > > > > +enum dvb_ca_timers { > > + DVB_CA_TIM_WR_HIGH /* wait after writing length high */ > > +, DVB_CA_TIM_WR_LOW /* wait after writing length low */ > > +, DVB_CA_TIM_WR_DATA /* wait between data bytes */ > > +, DVB_CA_TIM_MAX > > +}; > > + > > /* Information on a CA slot */ > > struct dvb_ca_slot { > > /* current state of the CAM */ > > @@ -119,6 +126,11 @@ struct dvb_ca_slot { > > unsigned long timeout; > > }; > > > > +struct dvb_ca_timer { > > + unsigned long min; > > + unsigned long max; > > +}; > > + > > /* Private CA-interface information */ > > struct dvb_ca_private { > > struct kref refcount; > > @@ -161,6 +173,14 @@ struct dvb_ca_private { > > > > /* mutex serializing ioctls */ > > struct mutex ioctl_mutex; > > + > > + struct dvb_ca_timer timers[DVB_CA_TIM_MAX]; > > +}; > > + > > +static const char dvb_ca_tim_names[DVB_CA_TIM_MAX][15] = { > > + "tim_wr_high" > > +, "tim_wr_low" > > +, "tim_wr_data" > > }; > > > > static void dvb_ca_private_free(struct dvb_ca_private *ca) > > @@ -223,6 +243,14 @@ static char *findstr(char *haystack, int hlen, char > > *needle, int nlen) > > return NULL; > > } > > > > +static void dvb_ca_sleep(struct dvb_ca_private *ca, enum dvb_ca_timers tim) > > +{ > > + unsigned long min = ca->timers[tim].min; > > + > > + if (min) > > + usleep_range(min, ca->timers[tim].max); > > +} > > + > > /* > > ************************************************************************** > > */ > > /* EN50221 physical interface functions */ > > > > @@ -869,10 +897,13 @@ static int dvb_ca_en50221_write_data(struct > > dvb_ca_private *ca, int slot, > > bytes_write >> 8); > > if (status) > > goto exit; > > + dvb_ca_sleep(ca, DVB_CA_TIM_WR_HIGH); > > + > > status = ca->pub->write_cam_control(ca->pub, slot, CTRLIF_SIZE_LOW, > > bytes_write & 0xff); > > if (status) > > goto exit; > > + dvb_ca_sleep(ca, DVB_CA_TIM_WR_LOW); > > > > /* send the buffer */ > > for (i = 0; i < bytes_write; i++) { > > @@ -880,6 +911,7 @@ static int dvb_ca_en50221_write_data(struct > > dvb_ca_private *ca, int slot, > > buf[i]); > > if (status) > > goto exit; > > + dvb_ca_sleep(ca, DVB_CA_TIM_WR_DATA); > > } > > > > /* check for write error (WE should now be 0) */ > > @@ -1834,6 +1866,97 @@ static const struct dvb_device dvbdev_ca = { > > }; > > > > /* > > ************************************************************************** > > */ > > +/* EN50221 device attributes (SysFS) */ > > + > > +static int dvb_ca_tim_idx(struct dvb_ca_private *ca, const char *name) > > +{ > > + int tim_idx; > > + > > + for (tim_idx = 0; tim_idx < DVB_CA_TIM_MAX; tim_idx++) { > > + if (!strcmp(dvb_ca_tim_names[tim_idx], name)) > > + return tim_idx; > > + } > > + return -1; > > +} > > + > > +static ssize_t dvb_ca_tim_show(struct device *device, > > + struct device_attribute *attr, char *buf) > > +{ > > + struct dvb_device *dvbdev = dev_get_drvdata(device); > > + struct dvb_ca_private *ca = dvbdev->priv; > > + int tim_idx = dvb_ca_tim_idx(ca, attr->attr.name); > > + > > + if (tim_idx < 0) > > + return -ENXIO; > > + > > + return sprintf(buf, "%ld\n", ca->timers[tim_idx].min); > > +} > > + > > +static ssize_t dvb_ca_tim_store(struct device *device, > > + struct device_attribute *attr, > > + const char *buf, size_t count) > > +{ > > + struct dvb_device *dvbdev = dev_get_drvdata(device); > > + struct dvb_ca_private *ca = dvbdev->priv; > > + int tim_idx = dvb_ca_tim_idx(ca, attr->attr.name); > > + unsigned long min, max; > > + > > + if (tim_idx < 0) > > + return -ENXIO; > > + > > + if (sscanf(buf, "%lu\n", &min) != 1) > > + return -EINVAL; > > + > > + /* value is in us; 100ms is a good maximum */ > > + if (min > (100 * USEC_PER_MSEC)) > > + return -EINVAL; > > + > > + /* +10% (rounded up) */ > > + max = (min * 11 + 5) / 10; > > + ca->timers[tim_idx].min = min; > > + ca->timers[tim_idx].max = max; > > + > > + return count; > > +} > > + > > +/* attribute definition with string pointer (see include/linux/sysfs.h) */ > > +#define DVB_CA_ATTR(_name, _mode, _show, _store) { \ > > + .attr = {.name = _name, .mode = _mode }, \ > > + .show = _show, \ > > + .store = _store, \ > > +} > > + > > +#define DVB_CA_ATTR_TIM(_tim_idx) \ > > + DVB_CA_ATTR(dvb_ca_tim_names[_tim_idx], 0664, dvb_ca_tim_show, \ > > + dvb_ca_tim_store) > > + > > +static const struct device_attribute dvb_ca_attrs[DVB_CA_TIM_MAX] = { > > + DVB_CA_ATTR_TIM(DVB_CA_TIM_WR_HIGH) > > +, DVB_CA_ATTR_TIM(DVB_CA_TIM_WR_LOW) > > +, DVB_CA_ATTR_TIM(DVB_CA_TIM_WR_DATA) > > +}; > > + > > +static int dvb_ca_device_attrs_add(struct dvb_ca_private *ca) > > +{ > > + int i; > > + > > + for (i = 0; i < ARRAY_SIZE(dvb_ca_attrs); i++) > > + if (device_create_file(ca->dvbdev->dev, &dvb_ca_attrs[i])) > > + goto fail; > > + return 0; > > +fail: > > + return -1; > > +} > > + > > +static void ddb_device_attrs_del(struct dvb_ca_private *ca) > > +{ > > + int i; > > + > > + for (i = 0; i < ARRAY_SIZE(dvb_ca_attrs); i++) > > + device_remove_file(ca->dvbdev->dev, &dvb_ca_attrs[i]); > > +} > > + > > +/* > > ************************************************************************** > > */ > > /* Initialisation/shutdown functions */ > > > > /** > > @@ -1903,6 +2026,10 @@ int dvb_ca_en50221_init(struct dvb_adapter > > *dvb_adapter, > > ret = -EINTR; > > goto unregister_device; > > } > > + > > + if (dvb_ca_device_attrs_add(ca)) > > + goto unregister_device; > > + > > mb(); > > > > /* create a kthread for monitoring this CA device */ > > @@ -1912,10 +2039,12 @@ int dvb_ca_en50221_init(struct dvb_adapter > > *dvb_adapter, > > ret = PTR_ERR(ca->thread); > > pr_err("dvb_ca_init: failed to start kernel_thread (%d)\n", > > ret); > > - goto unregister_device; > > + goto delete_attrs; > > } > > return 0; > > > > +delete_attrs: > > + ddb_device_attrs_del(ca); > > unregister_device: > > dvb_unregister_device(ca->dvbdev); > > free_slot_info: > > @@ -1946,6 +2075,7 @@ void dvb_ca_en50221_release(struct dvb_ca_en50221 > > *pubca) > > for (i = 0; i < ca->slot_count; i++) > > dvb_ca_en50221_slot_shutdown(ca, i); > > > > + ddb_device_attrs_del(ca); > > dvb_remove_device(ca->dvbdev); > > dvb_ca_private_put(ca); > > pubca->private = NULL; > > Thanks, Mauro
