[PATCH v6 11/13] ARM: dts: imx7s-warp: add ov2680 sensor node

[Rui Miguel Silva]

Warp7 comes with a Omnivision OV2680 sensor, add the node here to make complete
the camera data path for this system. Add the needed regulator to the analog
voltage supply, the port and endpoints in mipi_csi node and the pinctrl for the
reset gpio.

Signed-off-by: Rui Miguel Silva <rui.si...@linaro.org>
---
 arch/arm/boot/dts/imx7s-warp.dts | 44 ++++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts
index cb175ee2fc9d..bf04e13afd02 100644
--- a/arch/arm/boot/dts/imx7s-warp.dts
+++ b/arch/arm/boot/dts/imx7s-warp.dts
@@ -91,6 +91,14 @@
                regulator-always-on;
        };
 
+       reg_peri_3p15v: regulator-peri-3p15v {
+               compatible = "regulator-fixed";
+               regulator-name = "peri_3p15v_reg";
+               regulator-min-microvolt = <3150000>;
+               regulator-max-microvolt = <3150000>;
+               regulator-always-on;
+       };
+
        sound {
                compatible = "simple-audio-card";
                simple-audio-card,name = "imx7-sgtl5000";
@@ -218,6 +226,27 @@
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_i2c2>;
        status = "okay";
+
+       ov2680: camera@36 {
+               compatible = "ovti,ov2680";
+               pinctrl-names = "default";
+               pinctrl-0 = <&pinctrl_ov2680>;
+               reg = <0x36>;
+               clocks = <&osc>;
+               clock-names = "xvclk";
+               reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+               DOVDD-supply = <&sw2_reg>;
+               DVDD-supply = <&sw2_reg>;
+               AVDD-supply = <&reg_peri_3p15v>;
+
+               port {
+                       ov2680_to_mipi: endpoint {
+                               remote-endpoint = <&mipi_from_sensor>;
+                               clock-lanes = <0>;
+                               data-lanes = <1>;
+                       };
+               };
+       };
 };
 
 &i2c4 {
@@ -352,6 +381,15 @@
        #size-cells = <0>;
        fsl,csis-hs-settle = <3>;
 
+       port@0 {
+               reg = <0>;
+
+               mipi_from_sensor: endpoint {
+                       remote-endpoint = <&ov2680_to_mipi>;
+                       data-lanes = <1>;
+               };
+       };
+
        port@1 {
                reg = <1>;
 
@@ -408,6 +446,12 @@
                >;
        };
 
+       pinctrl_ov2680: ov2660grp {
+               fsl,pins = <
+                       MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3     0x14
+               >;
+       };
+
        pinctrl_sai1: sai1grp {
                fsl,pins = <
                        MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0    0x1f
-- 
2.17.0