On 12/02/2018 04:25 PM, Torbjorn Jansson wrote: > On 2018-11-14 14:25, Hans Verkuil wrote: >> Return 0 when invalidating the logical address. The cec core produces >> a warning for drivers that do this. >> >> Signed-off-by: Hans Verkuil <hans.verk...@cisco.com> >> Reported-by: Torbjorn Jansson <torbjorn.jans...@mbox200.swipnet.se> >> --- >> diff --git a/drivers/media/usb/pulse8-cec/pulse8-cec.c >> b/drivers/media/usb/pulse8-cec/pulse8-cec.c >> index 365c78b748dd..b085b14f3f87 100644 >> --- a/drivers/media/usb/pulse8-cec/pulse8-cec.c >> +++ b/drivers/media/usb/pulse8-cec/pulse8-cec.c >> @@ -586,7 +586,7 @@ static int pulse8_cec_adap_log_addr(struct cec_adapter >> *adap, u8 log_addr) >> else >> pulse8->config_pending = true; >> mutex_unlock(&pulse8->config_lock); >> - return err; >> + return log_addr == CEC_LOG_ADDR_INVALID ? 0 : err; >> } >> >> static int pulse8_cec_adap_transmit(struct cec_adapter *adap, u8 attempts, >> > > > question, is below warning also fixed by this patch? or is it a different > problem? > note that this warning showed up without me unplugging the usb device. > and cec-ctl have stopped working (again...)
Yes, same problem. Nothing to do with cec-ctl having stopped working. The real problem is this (quoted from https://hverkuil.home.xs4all.nl/cec-status.txt, end of the section "USB CEC Dongles"): "I'm no systemd hero and sometimes it won't pick up the device, esp. at boot time. I would be very happy if someone can take a good look at this and come up with better ideas. As far as I can tell the CEC device is picked up the first time it is connected to a USB port. But unplugging it, then replugging it into the same USB port will not pick it up again. You need to run inputattach manually in that case. It's something in udev/systemd, but I have no idea how to fix it." I have no time to chase this issue down. It probably requires contacting some systemd mailinglist and talk to people who actually understand systemd. If you want, you can give that a go. Regards, Hans
