Hi Dariusz,

One small typo below:

On 7/16/19 2:27 PM, Dariusz Marcinkiewicz wrote:
> Use the new cec_notifier_conn_(un)register() functions to
> (un)register the notifier for the HDMI connector, and fill in
> the cec_connector_info.
> 
> Changes since v2:
>       - removed unnecessary NULL check before a call to
>       cec_notifier_conn_unregister,
>       - use cec_notifier_phys_addr_invalidate to invalidate physical
>       address.
> Changes since v1:
>       Add memory barrier to make sure that the notifier
>       becomes visible to the irq thread once it is fully
>       constructed.
> 
> Signed-off-by: Dariusz Marcinkiewicz <dar...@google.com>
> ---
>  drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 36 ++++++++++++++---------
>  1 file changed, 22 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c 
> b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> index ab7968c8f6a29..1e183af0e1ab1 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
> @@ -2118,6 +2118,8 @@ static int dw_hdmi_bridge_attach(struct drm_bridge 
> *bridge)
>       struct dw_hdmi *hdmi = bridge->driver_private;
>       struct drm_encoder *encoder = bridge->encoder;
>       struct drm_connector *connector = &hdmi->connector;
> +     struct cec_connector_info conn_info;
> +     struct cec_notifier *notifier;
>  
>       connector->interlace_allowed = 1;
>       connector->polled = DRM_CONNECTOR_POLL_HPD;
> @@ -2129,6 +2131,18 @@ static int dw_hdmi_bridge_attach(struct drm_bridge 
> *bridge)
>  
>       drm_connector_attach_encoder(connector, encoder);
>  
> +     cec_fill_conn_info_from_drm(&conn_info, connector);
> +
> +     notifier = cec_notifier_conn_register(hdmi->dev, NULL, &conn_info);
> +     if (!notifier)
> +             return -ENOMEM;
> +     /*
> +      * Make sure that dw_hdmi_irq thread does see the notifier
> +      * when it fully constructed.
> +      */
> +     smp_wmb();
> +     hdmi->cec_notifier = notifier;
> +
>       return 0;
>  }
>  
> @@ -2295,9 +2309,13 @@ static irqreturn_t dw_hdmi_irq(int irq, void *dev_id)
>                                      phy_stat & HDMI_PHY_HPD,
>                                      phy_stat & HDMI_PHY_RX_SENSE);
>  
> -             if ((phy_stat & (HDMI_PHY_RX_SENSE | HDMI_PHY_HPD)) == 0)
> -                     cec_notifier_set_phys_addr(hdmi->cec_notifier,
> -                                                CEC_PHYS_ADDR_INVALID);
> +             if ((phy_stat & (HDMI_PHY_RX_SENSE | HDMI_PHY_HPD)) == 0) {
> +                     struct cec_notifier *notifer;

Typo: notifer -> notifier

Regards,

        Hans

> +
> +                     notifer = READ_ONCE(hdmi->cec_notifier);
> +                     if (notifer)
> +                             cec_notifier_phys_addr_invalidate(notifer);
> +             }
>       }
>  
>       if (intr_stat & HDMI_IH_PHY_STAT0_HPD) {
> @@ -2600,12 +2618,6 @@ __dw_hdmi_probe(struct platform_device *pdev,
>       if (ret)
>               goto err_iahb;
>  
> -     hdmi->cec_notifier = cec_notifier_get(dev);
> -     if (!hdmi->cec_notifier) {
> -             ret = -ENOMEM;
> -             goto err_iahb;
> -     }
> -
>       /*
>        * To prevent overflows in HDMI_IH_FC_STAT2, set the clk regenerator
>        * N and cts values before enabling phy
> @@ -2693,9 +2705,6 @@ __dw_hdmi_probe(struct platform_device *pdev,
>               hdmi->ddc = NULL;
>       }
>  
> -     if (hdmi->cec_notifier)
> -             cec_notifier_put(hdmi->cec_notifier);
> -
>       clk_disable_unprepare(hdmi->iahb_clk);
>       if (hdmi->cec_clk)
>               clk_disable_unprepare(hdmi->cec_clk);
> @@ -2717,8 +2726,7 @@ static void __dw_hdmi_remove(struct dw_hdmi *hdmi)
>       /* Disable all interrupts */
>       hdmi_writeb(hdmi, ~0, HDMI_IH_MUTE_PHY_STAT0);
>  
> -     if (hdmi->cec_notifier)
> -             cec_notifier_put(hdmi->cec_notifier);
> +     cec_notifier_conn_unregister(hdmi->cec_notifier);
>  
>       clk_disable_unprepare(hdmi->iahb_clk);
>       clk_disable_unprepare(hdmi->isfr_clk);
> 

Reply via email to