Since commit 10d5509c8d50 ("[media] v4l2: remove g/s_crop from video ops")
the 'which' field for set/get_selection must be FORMAT_ACTIVE. There is
no way to try different selections. The patch adds a helper function to
select the correct selection memory space (sub-device file handle or
driver state) which will be set/returned.

The selection rectangle is updated if the format is FORMAT_ACTIVE and
the rectangle position and/or size differs from the current set
rectangle.

Signed-off-by: Marco Felsch <m.fel...@pengutronix.de>
---
Changelog:

v8:
- adapt commit message
- remove wrong FORMAT_TRY handling for tvp5150_fill_fmt() handling
- return 0 during set_selection if FORMAT_TRY was requested and
  CONFIG_VIDEO_V4L2_SUBDEV_API is disabled
- return -EINVAL during get_selection if FORMAT_TRY was requested and
  CONFIG_VIDEO_V4L2_SUBDEV_API is disabled
v7:
- __tvp5150_get_pad_crop(): return error on default case
- simplify __tvp5150_get_pad_crop() error handling
- tvp5150_set_selection() squash __tvp5150_set_selection() execution
  conditions
v6:
nothing
v5:
 - handle stub for v4l2_subdev_get_try_crop() internal since commit
   ("media: v4l2-subdev: add stubs for v4l2_subdev_get_try_*")
   isn't anymore part of this series.
 - add error handling of __tvp5150_get_pad_crop()
v4:
 - fix merge conflict due to rebase on top of media-tree/master
 - __tvp5150_get_pad_crop(): cosmetic alignment fixes
---
 drivers/media/i2c/tvp5150.c | 111 +++++++++++++++++++++++++-----------
 1 file changed, 79 insertions(+), 32 deletions(-)

diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
index 477a929d4f89..62a1c7c3a7c0 100644
--- a/drivers/media/i2c/tvp5150.c
+++ b/drivers/media/i2c/tvp5150.c
@@ -19,6 +19,7 @@
 #include <media/v4l2-ctrls.h>
 #include <media/v4l2-fwnode.h>
 #include <media/v4l2-mc.h>
+#include <media/v4l2-rect.h>
 
 #include "tvp5150_reg.h"
 
@@ -995,6 +996,23 @@ static void tvp5150_set_default(v4l2_std_id std, struct 
v4l2_rect *crop)
                crop->height = TVP5150_V_MAX_OTHERS;
 }
 
+static struct v4l2_rect *
+__tvp5150_get_pad_crop(struct tvp5150 *decoder,
+                      struct v4l2_subdev_pad_config *cfg, unsigned int pad,
+                      enum v4l2_subdev_format_whence which)
+{
+       switch (which) {
+       case V4L2_SUBDEV_FORMAT_ACTIVE:
+               return &decoder->rect;
+       case V4L2_SUBDEV_FORMAT_TRY:
+#if defined(CONFIG_VIDEO_V4L2_SUBDEV_API)
+               return v4l2_subdev_get_try_crop(&decoder->sd, cfg, pad);
+#endif
+       default:
+               return ERR_PTR(-EINVAL);
+       }
+}
+
 static int tvp5150_fill_fmt(struct v4l2_subdev *sd,
                            struct v4l2_subdev_pad_config *cfg,
                            struct v4l2_subdev_format *format)
@@ -1019,36 +1037,68 @@ static int tvp5150_fill_fmt(struct v4l2_subdev *sd,
        return 0;
 }
 
+unsigned int tvp5150_get_hmax(struct v4l2_subdev *sd)
+{
+       struct tvp5150 *decoder = to_tvp5150(sd);
+       v4l2_std_id std;
+
+       /* Calculate height based on current standard */
+       if (decoder->norm == V4L2_STD_ALL)
+               std = tvp5150_read_std(sd);
+       else
+               std = decoder->norm;
+
+       return (std & V4L2_STD_525_60) ?
+               TVP5150_V_MAX_525_60 : TVP5150_V_MAX_OTHERS;
+}
+
+static inline void
+__tvp5150_set_selection(struct v4l2_subdev *sd, struct v4l2_rect rect)
+{
+       struct tvp5150 *decoder = to_tvp5150(sd);
+       unsigned int hmax = tvp5150_get_hmax(sd);
+
+       regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_START, rect.top);
+       regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_STOP,
+                    rect.top + rect.height - hmax);
+       regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_MSB,
+                    rect.left >> TVP5150_CROP_SHIFT);
+       regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_LSB,
+                    rect.left | (1 << TVP5150_CROP_SHIFT));
+       regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_MSB,
+                    (rect.left + rect.width - TVP5150_MAX_CROP_LEFT) >>
+                    TVP5150_CROP_SHIFT);
+       regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_LSB,
+                    rect.left + rect.width - TVP5150_MAX_CROP_LEFT);
+}
+
 static int tvp5150_set_selection(struct v4l2_subdev *sd,
                                 struct v4l2_subdev_pad_config *cfg,
                                 struct v4l2_subdev_selection *sel)
 {
        struct tvp5150 *decoder = to_tvp5150(sd);
        struct v4l2_rect rect = sel->r;
-       v4l2_std_id std;
-       int hmax;
+       struct v4l2_rect *crop;
+       unsigned int hmax;
 
-       if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE ||
-           sel->target != V4L2_SEL_TGT_CROP)
+       if (sel->target != V4L2_SEL_TGT_CROP)
                return -EINVAL;
 
        dev_dbg_lvl(sd->dev, 1, debug, "%s left=%d, top=%d, width=%d, 
height=%d\n",
                __func__, rect.left, rect.top, rect.width, rect.height);
 
+       /*
+        * Do not apply the request in case of FORMAT_TRY and disabled
+        * CONFIG_VIDEO_V4L2_SUBDEV_API support.
+        */
+       crop = __tvp5150_get_pad_crop(decoder, cfg, sel->pad, sel->which);
+       if (IS_ERR(crop))
+               return 0;
+
        /* tvp5150 has some special limits */
        rect.left = clamp(rect.left, 0, TVP5150_MAX_CROP_LEFT);
        rect.top = clamp(rect.top, 0, TVP5150_MAX_CROP_TOP);
-
-       /* Calculate height based on current standard */
-       if (decoder->norm == V4L2_STD_ALL)
-               std = tvp5150_read_std(sd);
-       else
-               std = decoder->norm;
-
-       if (std & V4L2_STD_525_60)
-               hmax = TVP5150_V_MAX_525_60;
-       else
-               hmax = TVP5150_V_MAX_OTHERS;
+       hmax = tvp5150_get_hmax(sd);
 
        /*
         * alignments:
@@ -1061,20 +1111,15 @@ static int tvp5150_set_selection(struct v4l2_subdev *sd,
                              hmax - TVP5150_MAX_CROP_TOP - rect.top,
                              hmax - rect.top, 0, 0);
 
-       regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_START, rect.top);
-       regmap_write(decoder->regmap, TVP5150_VERT_BLANKING_STOP,
-                    rect.top + rect.height - hmax);
-       regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_MSB,
-                    rect.left >> TVP5150_CROP_SHIFT);
-       regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_ST_LSB,
-                    rect.left | (1 << TVP5150_CROP_SHIFT));
-       regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_MSB,
-                    (rect.left + rect.width - TVP5150_MAX_CROP_LEFT) >>
-                    TVP5150_CROP_SHIFT);
-       regmap_write(decoder->regmap, TVP5150_ACT_VD_CROP_STP_LSB,
-                    rect.left + rect.width - TVP5150_MAX_CROP_LEFT);
+       /*
+        * Update output image size if the selection (crop) rectangle size or
+        * position has been modified.
+        */
+       if (sel->which == V4L2_SUBDEV_FORMAT_ACTIVE &&
+           !v4l2_rect_equal(&rect, crop))
+               __tvp5150_set_selection(sd, rect);
 
-       decoder->rect = rect;
+       *crop = rect;
 
        return 0;
 }
@@ -1084,11 +1129,9 @@ static int tvp5150_get_selection(struct v4l2_subdev *sd,
                                 struct v4l2_subdev_selection *sel)
 {
        struct tvp5150 *decoder = container_of(sd, struct tvp5150, sd);
+       struct v4l2_rect *crop;
        v4l2_std_id std;
 
-       if (sel->which != V4L2_SUBDEV_FORMAT_ACTIVE)
-               return -EINVAL;
-
        switch (sel->target) {
        case V4L2_SEL_TGT_CROP_BOUNDS:
                sel->r.left = 0;
@@ -1106,7 +1149,11 @@ static int tvp5150_get_selection(struct v4l2_subdev *sd,
                        sel->r.height = TVP5150_V_MAX_OTHERS;
                return 0;
        case V4L2_SEL_TGT_CROP:
-               sel->r = decoder->rect;
+               crop = __tvp5150_get_pad_crop(decoder, cfg, sel->pad,
+                                               sel->which);
+               if (IS_ERR(crop))
+                       return PTR_ERR(crop);
+               sel->r = *crop;
                return 0;
        default:
                return -EINVAL;
-- 
2.20.1

Reply via email to