Manju, Could you review the Document? I think it is not updated to reflect the latest status:
>+ Current status:- >+ >+ A build tested version of vpbe controller is available. I guess you have already tested this using the v4l2 driver. >+ v4l2 driver >+ - A version is already developed which is to be cleaned up and unit >tested Ditto. v4l2 driver is already tested, right? Murali Karicheri Software Design Engineer Texas Instruments Inc. Germantown, MD 20874 >-----Original Message----- >From: linux-media-ow...@vger.kernel.org [mailto:linux-media- >ow...@vger.kernel.org] On Behalf Of Manjunath Hadli >Sent: Wednesday, December 15, 2010 4:12 AM >To: LMML >Cc: dlos; Mauro Carvalho Chehab; Hans Verkuil; Hadli, Manjunath >Subject: [PATCH v6 7/7] davinci vpbe: Readme text for Dm6446 vpbe > >Please refer to this file for detailed documentation of >davinci vpbe v4l2 driver > >Signed-off-by: Manjunath Hadli <manjunath.ha...@ti.com> >Acked-by: Muralidharan Karicheri <m-kariche...@ti.com> >Acked-by: Hans Verkuil <hverk...@xs4all.nl> >--- > Documentation/video4linux/README.davinci-vpbe | 100 >+++++++++++++++++++++++++ > 1 files changed, 100 insertions(+), 0 deletions(-) > create mode 100644 Documentation/video4linux/README.davinci-vpbe > >diff --git a/Documentation/video4linux/README.davinci-vpbe >b/Documentation/video4linux/README.davinci-vpbe >new file mode 100644 >index 0000000..3ff2dc3 >--- /dev/null >+++ b/Documentation/video4linux/README.davinci-vpbe >@@ -0,0 +1,100 @@ >+ >+ VPBE V4L2 driver design >+ ====================================================================== >+ >+ File partitioning >+ ----------------- >+ V4L2 display device driver >+ drivers/media/video/davinci/vpbe_display.c >+ drivers/media/video/davinci/vpbe_display.h >+ >+ VPBE display controller >+ drivers/media/video/davinci/vpbe.c >+ drivers/media/video/davinci/vpbe.h >+ >+ VPBE venc sub device driver >+ drivers/media/video/davinci/vpbe_venc.c >+ drivers/media/video/davinci/vpbe_venc.h >+ drivers/media/video/davinci/vpbe_venc_regs.h >+ >+ VPBE osd driver >+ drivers/media/video/davinci/vpbe_osd.c >+ drivers/media/video/davinci/vpbe_osd.h >+ drivers/media/video/davinci/vpbe_osd_regs.h >+ >+ Functional partitioning >+ ----------------------- >+ >+ Consists of the following (in the same order as the list under file >+ partitioning):- >+ >+ 1. V4L2 display driver >+ Implements video2 and video3 device nodes and >+ provides v4l2 device interface to manage VID0 and VID1 layers. >+ >+ 2. Display controller >+ Loads up venc, osd and external encoders such as ths8200. It provides >+ a set of API calls to V4L2 drivers to set the output/standards >+ in the venc or external sub devices. It also provides >+ a device object to access the services from osd sub device >+ using sub device ops. The connection of external encoders to venc LCD >+ controller port is done at init time based on default output and >standard >+ selection or at run time when application change the output through >+ V4L2 IOCTLs. >+ >+ When connetected to an external encoder, vpbe controller is also >responsible >+ for setting up the interface between venc and external encoders based >on >+ board specific settings (specified in board-xxx-evm.c). This allows >+ interfacing external encoders such as ths8200. The setup_if_config() >+ is implemented for this as well as configure_venc() (part of the next >patch) >+ API to set timings in venc for a specific display resolution. As of >this >+ patch series, the interconnection and enabling ans setting of the >external >+ encoders is not present, and would be a part of the next patch series. >+ >+ 3. Venc subdevice >+ Responsible for setting outputs provided through internal dacs and >also >+ setting timings at LCD controller port when external encoders are >connected >+ at the port or LCD panel timings required. When external encoder/LCD >panel >+ is connected, the timings for a specific standard/preset is retrieved >from >+ the board specific table and the values are used to set the timings in >+ venc using non-standard timing mode. >+ >+ Support LCD Panel displays using the venc. For example to support a >Logic >+ PD display, it requires setting up the LCD controller port with a set >of >+ timings for the resolution supported and setting the dot clock. So we >could >+ add the available outputs as a board specific entry (i.e add the >"LogicPD" >+ output name to board-xxx-evm.c). A table of timings for various LCDs >+ supported can be maintained in the board specific setup file to >support >+ various LCD displays. >+ >+ 4. osd subdevice >+ Osd subdevice implements all osd layer management and hardware >specific >+ features. In the legacfy drivers (LSPxxx), the hardware specific >features >+ are configured through proprietary IOCTLs at the fb device interface. >Since >+ subdevices are going to support device nodes, application will be able >+ to configure the hardware feature directly by opening the osd >subdevice >+ node and by calling the related IOCTL. So these proprietary IOCTLs are >+ to be removed from the FB Device driver when doing up port of these >drivers to >+ mainline kernel. The V4L2 and FB device nodes supports only IOCTLS as >per >+ the associated spec. The rest of the IOCTLs are to be moved to osd and >+ venc subdevices. >+ >+ Current status:- >+ >+ A build tested version of vpbe controller is available. >+ >+ Following are TBDs. >+ >+ vpbe display controller >+ - review and modify the handling of external encoders. >+ - add support for selecting external encoder as default at probe time. >+ >+ vpbe venc sub device >+ - add timings for supporting ths8200 >+ - add support for LogicPD LCD. >+ >+ v4l2 driver >+ - A version is already developed which is to be cleaned up and unit >tested >+ >+ FB drivers >+ - Add support for fbdev drivers.- Ready and part of subsequent patches. >-- >1.6.2.4 > >-- >To unsubscribe from this list: send the line "unsubscribe linux-media" in >the body of a message to majord...@vger.kernel.org >More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
