Issues with Register 02 causing spurious channel locking from standby.
Should have always bits 4 & 5 written to 1.
Lower nibble not used in any current driver. Usage if necessary can be applied
through initab to mcr_reg.
stv0299 not out of standby before writing inittab.
Signed-off-by: Malcolm Priestley <tvbox...@gmail.com>
---
drivers/media/dvb/frontends/stv0299.c | 10 ++++++++--
1 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/media/dvb/frontends/stv0299.c
b/drivers/media/dvb/frontends/stv0299.c
index 4e3db3a..42684be 100644
--- a/drivers/media/dvb/frontends/stv0299.c
+++ b/drivers/media/dvb/frontends/stv0299.c
@@ -64,6 +64,7 @@ struct stv0299_state {
fe_code_rate_t fec_inner;
int errmode;
u32 ucblocks;
+ u8 mcr_reg;
};
#define STATUS_BER 0
@@ -457,6 +458,9 @@ static int stv0299_init (struct dvb_frontend* fe)
dprintk("stv0299: init chip\n");
+ stv0299_writeregI(state, 0x02, 0x30 | state->mcr_reg);
+ msleep(50);
+
for (i = 0; ; i += 2) {
reg = state->config->inittab[i];
val = state->config->inittab[i+1];
@@ -464,6 +468,8 @@ static int stv0299_init (struct dvb_frontend* fe)
break;
if (reg == 0x0c && state->config->op0_off)
val &= ~0x10;
+ if (reg == 0x2)
+ state->mcr_reg = val & 0xf;
stv0299_writeregI(state, reg, val);
}
@@ -618,7 +624,7 @@ static int stv0299_sleep(struct dvb_frontend* fe)
{
struct stv0299_state* state = fe->demodulator_priv;
- stv0299_writeregI(state, 0x02, 0x80);
+ stv0299_writeregI(state, 0x02, 0xb0 | state->mcr_reg);
state->initialised = 0;
return 0;
@@ -680,7 +686,7 @@ struct dvb_frontend* stv0299_attach(const struct
stv0299_config* config,
state->errmode = STATUS_BER;
/* check if the demod is there */
- stv0299_writeregI(state, 0x02, 0x34); /* standby off */
+ stv0299_writeregI(state, 0x02, 0x30); /* standby off */
msleep(200);
id = stv0299_readreg(state, 0x00);
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
