2011/4/2 Antti Palosaari <cr...@iki.fi>: > On 04/02/2011 04:45 PM, adq wrote: >> >> 2011/4/2 Antti Palosaari<cr...@iki.fi>: >>> >>> On 04/02/2011 02:06 PM, adq wrote: >>>> >>>> 2011/4/2 Antti Palosaari<cr...@iki.fi>: >>>>> >>>>> On 04/02/2011 04:24 AM, adq wrote: >>>>>> >>>>>> Hi, just been trying it out, with no success. On my test machine, FE0 >>>>>> no longer tunes, but FE1 is still fine, so I've just been testing FE0. >>>>> >>>>> You try to say other frontend / tuner is physically dead? Which one? >>>> >>>> No no - I can revive it by simply unplugging and replugging the >>>> device, but I was avoiding doing that to see if we could either track >>>> down something erroneous, or be able to reset it from software. >>>> >>>> It'd be /really/ handy if they'd connected that reset tuner GPIO :( >>>> There isn't a way to completely reset the device from software I take >>>> it? Or any other GPIOs hanging about I could test with? >>> >>> There is few I know, USB command 0x13 boots AF9015 somehow, USB command >>> 0x5a >>> reconnects it from USB bus. But most interesting one is demodulator reset >>> register 0xe205, write 1 to that reg should reset it. >> >> Just tried writing 1 to 0xe205 - no change. > > OK. > >> Looks like USB commands 0x13/0x5a will be done as part of a normal >> module reload? (In which case it doesn't fix it). >> >> I can actually reboot the machine completely, and the problem stays! >> Only physically unplugging the device sorts it. > > You are correct. I don't have any idea anymore. Only is wish to know if that > happens in Windows too.
Yeah, no more ideas here either, and I can't really try it under windows. Beginning to think its some hardware issue. As a "workaround", if you make sure your software doesn't retune constantly, it seems to survive reasonably ok. The other one I have in my server is fine after a few weeks now I've turned off any auto EIT/signalmonitoring stuff in tvheadend. I just need to write a quick cron job to check the tuning still works. :( -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
