Currently, in omap_vout_isr(), if the panel type is DPI, and if we
get either VSYNC or VSYNC2 interrupts, we proceed ahead to set the
current buffers state to VIDEOBUF_DONE and prepare to display the
next frame in the queue.
On OMAP4, because we have 2 LCD managers, the panel type itself is not
sufficient to tell if we have received the correct irq, i.e, we shouldn't
proceed ahead if we get a VSYNC interrupt for LCD2 manager, or a VSYNC2
interrupt for LCD manager.
Fix this by correlating LCD manager to VSYNC interrupt and LCD2 manager
to VSYNC2 interrupt.
Signed-off-by: Archit Taneja <arc...@ti.com>
---
drivers/media/video/omap/omap_vout.c | 14 +++++++++++---
1 files changed, 11 insertions(+), 3 deletions(-)
diff --git a/drivers/media/video/omap/omap_vout.c
b/drivers/media/video/omap/omap_vout.c
index 247ea31..6bc2620 100644
--- a/drivers/media/video/omap/omap_vout.c
+++ b/drivers/media/video/omap/omap_vout.c
@@ -566,8 +566,8 @@ err:
static void omap_vout_isr(void *arg, unsigned int irqstatus)
{
- int ret, fid;
- u32 addr;
+ int ret, fid, mgr_id;
+ u32 addr, irq;
struct omap_overlay *ovl;
struct timeval timevalue;
struct omapvideo_info *ovid;
@@ -583,6 +583,7 @@ static void omap_vout_isr(void *arg, unsigned int irqstatus)
if (!ovl->manager || !ovl->manager->device)
return;
+ mgr_id = ovl->manager->id;
cur_display = ovl->manager->device;
spin_lock(&vout->vbq_lock);
@@ -590,7 +591,14 @@ static void omap_vout_isr(void *arg, unsigned int
irqstatus)
switch (cur_display->type) {
case OMAP_DISPLAY_TYPE_DPI:
- if (!(irqstatus & (DISPC_IRQ_VSYNC | DISPC_IRQ_VSYNC2)))
+ if (mgr_id == OMAP_DSS_CHANNEL_LCD)
+ irq = DISPC_IRQ_VSYNC;
+ else if (mgr_id == OMAP_DSS_CHANNEL_LCD2)
+ irq = DISPC_IRQ_VSYNC2;
+ else
+ goto vout_isr_err;
+
+ if (!(irqstatus & irq))
goto vout_isr_err;
break;
case OMAP_DISPLAY_TYPE_VENC:
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
