Remove isp_set_pixel_clock().
Remove set_pixel_clock() callback from platform callbacks since the same
information is now passed to the ISP driver by other means.
Remove struct ispccdc_vp since the only field in this structure, pixelclk,
is no longer used.
Remove isp_video_is_shiftable() --- this will live on as ccdc_is_shiftable
in ispccdc.c.
Remove isp_video_validate_pipeline(). Pipeline validation is now split into
appropriate subdevs, so this can be removed.
Signed-off-by: Sakari Ailus <sakari.ai...@iki.fi>
---
drivers/media/video/omap3isp/isp.c | 14 ---
drivers/media/video/omap3isp/ispccdc.h | 10 --
drivers/media/video/omap3isp/ispvideo.c | 139 -------------------------------
3 files changed, 0 insertions(+), 163 deletions(-)
diff --git a/drivers/media/video/omap3isp/isp.c
b/drivers/media/video/omap3isp/isp.c
index ae67f49..ea34075 100644
--- a/drivers/media/video/omap3isp/isp.c
+++ b/drivers/media/video/omap3isp/isp.c
@@ -329,19 +329,6 @@ void omap3isp_configure_bridge(struct isp_device *isp,
isp_reg_writel(isp, ispctrl_val, OMAP3_ISP_IOMEM_MAIN, ISP_CTRL);
}
-/**
- * isp_set_pixel_clock - Configures the ISP pixel clock
- * @isp: OMAP3 ISP device
- * @pixelclk: Average pixel clock in Hz
- *
- * Set the average pixel clock required by the sensor. The ISP will use the
- * lowest possible memory bandwidth settings compatible with the clock.
- **/
-static void isp_set_pixel_clock(struct isp_device *isp, unsigned int pixelclk)
-{
- isp->isp_ccdc.vpcfg.pixelclk = pixelclk;
-}
-
void omap3isp_hist_dma_done(struct isp_device *isp)
{
if (omap3isp_ccdc_busy(&isp->isp_ccdc) ||
@@ -2118,7 +2105,6 @@ static int isp_probe(struct platform_device *pdev)
isp->autoidle = autoidle;
isp->platform_cb.set_xclk = isp_set_xclk;
- isp->platform_cb.set_pixel_clock = isp_set_pixel_clock;
mutex_init(&isp->isp_mutex);
spin_lock_init(&isp->stat_lock);
diff --git a/drivers/media/video/omap3isp/ispccdc.h
b/drivers/media/video/omap3isp/ispccdc.h
index 6d0264b..e570abe 100644
--- a/drivers/media/video/omap3isp/ispccdc.h
+++ b/drivers/media/video/omap3isp/ispccdc.h
@@ -80,14 +80,6 @@ struct ispccdc_syncif {
u8 bt_r656_en;
};
-/*
- * struct ispccdc_vp - Structure for Video Port parameters
- * @pixelclk: Input pixel clock in Hz
- */
-struct ispccdc_vp {
- unsigned int pixelclk;
-};
-
enum ispccdc_lsc_state {
LSC_STATE_STOPPED = 0,
LSC_STATE_STOPPING = 1,
@@ -161,7 +153,6 @@ struct ispccdc_lsc {
* @update: Bitmask of controls to update during the next interrupt
* @shadow_update: Controls update in progress by userspace
* @syncif: Interface synchronization configuration
- * @vpcfg: Video port configuration
* @underrun: A buffer underrun occurred and a new buffer has been queued
* @state: Streaming state
* @lock: Serializes shadow_update with interrupt handler
@@ -190,7 +181,6 @@ struct isp_ccdc_device {
unsigned int shadow_update;
struct ispccdc_syncif syncif;
- struct ispccdc_vp vpcfg;
unsigned int underrun:1;
enum isp_pipeline_stream_state state;
diff --git a/drivers/media/video/omap3isp/ispvideo.c
b/drivers/media/video/omap3isp/ispvideo.c
index 2e4786d..07832c8 100644
--- a/drivers/media/video/omap3isp/ispvideo.c
+++ b/drivers/media/video/omap3isp/ispvideo.c
@@ -130,37 +130,6 @@ omap3isp_video_format_info(enum v4l2_mbus_pixelcode code)
}
/*
- * Decide whether desired output pixel code can be obtained with
- * the lane shifter by shifting the input pixel code.
- * @in: input pixelcode to shifter
- * @out: output pixelcode from shifter
- * @additional_shift: # of bits the sensor's LSB is offset from CAMEXT[0]
- *
- * return true if the combination is possible
- * return false otherwise
- */
-static bool isp_video_is_shiftable(enum v4l2_mbus_pixelcode in,
- enum v4l2_mbus_pixelcode out,
- unsigned int additional_shift)
-{
- const struct isp_format_info *in_info, *out_info;
-
- if (in == out)
- return true;
-
- in_info = omap3isp_video_format_info(in);
- out_info = omap3isp_video_format_info(out);
-
- if ((in_info->flavor == 0) || (out_info->flavor == 0))
- return false;
-
- if (in_info->flavor != out_info->flavor)
- return false;
-
- return in_info->bpp - out_info->bpp + additional_shift <= 6;
-}
-
-/*
* isp_video_mbus_to_pix - Convert v4l2_mbus_framefmt to v4l2_pix_format
* @video: ISP video instance
* @mbus: v4l2_mbus_framefmt format (input)
@@ -284,107 +253,6 @@ isp_video_far_end(struct isp_video *video)
return far_end;
}
-/*
- * Validate a pipeline by checking both ends of all links for format
- * discrepancies.
- *
- * Compute the minimum time per frame value as the maximum of time per frame
- * limits reported by every block in the pipeline.
- *
- * Return 0 if all formats match, or -EPIPE if at least one link is found with
- * different formats on its two ends or if the pipeline doesn't start with a
- * video source (either a subdev with no input pad, or a non-subdev entity).
- */
-static int isp_video_validate_pipeline(struct isp_pipeline *pipe)
-{
- struct isp_device *isp = pipe->output->isp;
- struct v4l2_subdev_format fmt_source;
- struct v4l2_subdev_format fmt_sink;
- struct media_pad *pad;
- struct v4l2_subdev *subdev;
- int ret;
-
- subdev = isp_video_remote_subdev(pipe->output, NULL);
- if (subdev == NULL)
- return -EPIPE;
-
- while (1) {
- unsigned int shifter_link;
- /* Retrieve the sink format */
- pad = &subdev->entity.pads[0];
- if (!(pad->flags & MEDIA_PAD_FL_SINK))
- break;
-
- fmt_sink.pad = pad->index;
- fmt_sink.which = V4L2_SUBDEV_FORMAT_ACTIVE;
- ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt_sink);
- if (ret < 0 && ret != -ENOIOCTLCMD)
- return -EPIPE;
-
- /* Update the maximum frame rate */
- if (subdev == &isp->isp_res.subdev)
- omap3isp_resizer_max_rate(&isp->isp_res,
- &pipe->max_rate);
-
- /* Check ccdc maximum data rate when data comes from sensor
- * TODO: Include ccdc rate in pipe->max_rate and compare the
- * total pipe rate with the input data rate from sensor.
- */
- if (subdev == &isp->isp_ccdc.subdev && pipe->input == NULL) {
- unsigned int rate = UINT_MAX;
-
- omap3isp_ccdc_max_rate(&isp->isp_ccdc, &rate);
- if (isp->isp_ccdc.vpcfg.pixelclk > rate)
- return -ENOSPC;
- }
-
- /* If sink pad is on CCDC, the link has the lane shifter
- * in the middle of it. */
- shifter_link = subdev == &isp->isp_ccdc.subdev;
-
- /* Retrieve the source format. Return an error if no source
- * entity can be found, and stop checking the pipeline if the
- * source entity isn't a subdev.
- */
- pad = media_entity_remote_source(pad);
- if (pad == NULL)
- return -EPIPE;
-
- if (media_entity_type(pad->entity) != MEDIA_ENT_T_V4L2_SUBDEV)
- break;
-
- subdev = media_entity_to_v4l2_subdev(pad->entity);
-
- fmt_source.pad = pad->index;
- fmt_source.which = V4L2_SUBDEV_FORMAT_ACTIVE;
- ret = v4l2_subdev_call(subdev, pad, get_fmt, NULL, &fmt_source);
- if (ret < 0 && ret != -ENOIOCTLCMD)
- return -EPIPE;
-
- /* Check if the two ends match */
- if (fmt_source.format.width != fmt_sink.format.width ||
- fmt_source.format.height != fmt_sink.format.height)
- return -EPIPE;
-
- if (shifter_link) {
- unsigned int parallel_shift = 0;
- if (isp->isp_ccdc.input == CCDC_INPUT_PARALLEL) {
- struct isp_parallel_platform_data *pdata =
- &((struct isp_v4l2_subdevs_group *)
- subdev->host_priv)->bus.parallel;
- parallel_shift = pdata->data_lane_shift * 2;
- }
- if (!isp_video_is_shiftable(fmt_source.format.code,
- fmt_sink.format.code,
- parallel_shift))
- return -EPIPE;
- } else if (fmt_source.format.code != fmt_sink.format.code)
- return -EPIPE;
- }
-
- return 0;
-}
-
static int
__isp_video_get_format(struct isp_video *video, struct v4l2_format *format)
{
@@ -1034,13 +902,6 @@ isp_video_streamon(struct file *file, void *fh, enum
v4l2_buf_type type)
pipe->output = far_end;
}
- /* Validate the pipeline and update its state. */
- ret = isp_video_validate_pipeline(pipe);
- if (ret < 0)
- goto err_isp_video_check_format;
-
- pipe->error = false;
-
spin_lock_irqsave(&pipe->lock, flags);
pipe->state &= ~ISP_PIPELINE_STREAM;
pipe->state |= state;
--
1.7.2.5
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
