Hi Guennadi,
>> Thanks for the patch, comments below.
Thanks for you comments.
>> On Mon, 30 Jul 2012, Alex Gershgorin wrote:
> This patch has been successfully tested
>
> Signed-off-by: Alex Gershgorin <al...@meprolight.com>
> ---
> drivers/media/video/Kconfig | 2 +-
> drivers/media/video/mt9v022.c | 28 ++++++++++++++++++----------
> 2 files changed, 19 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
> index 99937c9..38d6944 100644
> --- a/drivers/media/video/Kconfig
> +++ b/drivers/media/video/Kconfig
> @@ -1013,7 +1013,7 @@ config SOC_CAMERA_MT9T112
> This driver supports MT9T112 cameras from Aptina.
>
> config SOC_CAMERA_MT9V022
> - tristate "mt9v022 support"
> + tristate "mt9v022 and mt9v024 support"
> depends on SOC_CAMERA && I2C
> select GPIO_PCA953X if MT9V022_PCA9536_SWITCH
> help
> diff --git a/drivers/media/video/mt9v022.c b/drivers/media/video/mt9v022.c
> index bf63417..d2c1ab1 100644
> --- a/drivers/media/video/mt9v022.c
> +++ b/drivers/media/video/mt9v022.c
> @@ -26,7 +26,7 @@
> * The platform has to define ctruct i2c_board_info objects and link to them
> * from struct soc_camera_link
> */
> -
> +static s32 chip_id;
>> No, this should be per instance. Please, add it to struct mt9v022.
> static char *sensor_type;
> module_param(sensor_type, charp, S_IRUGO);
> MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or \"monochrome\"");
> @@ -57,6 +57,10 @@ MODULE_PARM_DESC(sensor_type, "Sensor type: \"colour\" or
> \"monochrome\"");
> #define MT9V022_AEC_AGC_ENABLE 0xAF
> #define MT9V022_MAX_TOTAL_SHUTTER_WIDTH 0xBD
>
> +/* mt9v024 partial list register addresses changes with respect to mt9v022 */
> +#define MT9V024_PIXCLK_FV_LV 0x72
> +#define MT9V024_MAX_TOTAL_SHUTTER_WIDTH 0xAD
> +
> /* Progressive scan, master, defaults */
> #define MT9V022_CHIP_CONTROL_DEFAULT 0x188
>
> @@ -185,7 +189,9 @@ static int mt9v022_init(struct i2c_client *client)
> if (!ret)
> ret = reg_write(client, MT9V022_TOTAL_SHUTTER_WIDTH, 480);
> if (!ret)
> - ret = reg_write(client, MT9V022_MAX_TOTAL_SHUTTER_WIDTH, 480);
> + ret = reg_write(client, (chip_id == 0x1324) ?
>> I would use a macro something like
>> #define is_mt9v024(p) (p->chip_id == 0x1324)
>> same everywhere below
> + MT9V024_MAX_TOTAL_SHUTTER_WIDTH :
> + MT9V022_MAX_TOTAL_SHUTTER_WIDTH, 480);
>> Hm, with just 2 registers different it almost isn't worth it, but still...
There is little more than two registers and also added new registers
if you're interested I can send you the document.
>> (1) if someone uses this driver as a template, or (2) if we add more
>> sensors or more registers, whose addresses also are different, I think, we
>> better do it properly. How about
/* only registers with different addresses on different mt9v02x sensors */
>> struct mt9v02x_register {
>> u8 max_total_shutter_width;
>> u8 pixclk_fv_lv;
>>};
>> static const struct mt9v02x_register mt9v022_register = {
>> .max_total_shutter_width = MT9V022_MAX_TOTAL_SHUTTER_WIDTH,
>> .pixclk_fv_lv = MT9V022_PIXCLK_FV_LV,
>>};
>> static const struct mt9v02x_register mt9v024_register = {
>> .max_total_shutter_width = MT9V024_MAX_TOTAL_SHUTTER_WIDTH,
>> .pixclk_fv_lv = MT9V024_PIXCLK_FV_LV,
>>};
>> struct mt9v022 {
>> ...
>> const struct mt9v02x_register *reg;
>> ...
>>};
>> and then in this case just do
>> + ret = reg_write(client,
>> mt9v022->reg->max_total_shutter_width, 480);
>> etc.?
I accept your corrections and suggestions in the near future
I will send an updated version of this patch.
Regards,
Alex
> if (!ret)
> /* default - auto */
> ret = reg_clear(client, MT9V022_BLACK_LEVEL_CALIB_CTRL, 1);
> @@ -238,8 +244,10 @@ static int mt9v022_s_crop(struct v4l2_subdev *sd, struct
> v4l2_crop *a)
> ret = reg_read(client, MT9V022_AEC_AGC_ENABLE);
> if (ret >= 0) {
> if (ret & 1) /* Autoexposure */
> - ret = reg_write(client, MT9V022_MAX_TOTAL_SHUTTER_WIDTH,
> - rect.height + mt9v022->y_skip_top + 43);
> + ret = reg_write(client, (chip_id == 0x1324) ?
> + MT9V024_MAX_TOTAL_SHUTTER_WIDTH :
> + MT9V022_MAX_TOTAL_SHUTTER_WIDTH,
> + rect.height + mt9v022->y_skip_top + 43);
> else
> ret = reg_write(client, MT9V022_TOTAL_SHUTTER_WIDTH,
> rect.height + mt9v022->y_skip_top + 43);
> @@ -566,18 +574,17 @@ static int mt9v022_video_probe(struct i2c_client
> *client)
> {
> struct mt9v022 *mt9v022 = to_mt9v022(client);
> struct soc_camera_link *icl = soc_camera_i2c_to_link(client);
> - s32 data;
> int ret;
> unsigned long flags;
>
> /* Read out the chip version register */
> - data = reg_read(client, MT9V022_CHIP_VERSION);
> + chip_id = reg_read(client, MT9V022_CHIP_VERSION);
>
> /* must be 0x1311 or 0x1313 */
> - if (data != 0x1311 && data != 0x1313) {
> + if (chip_id != 0x1311 && chip_id != 0x1313 && chip_id != 0x1324) {
> ret = -ENODEV;
> dev_info(&client->dev, "No MT9V022 found, ID register 0x%x\n",
> - data);
> + chip_id);
> goto ei2c;
> }
>
> @@ -632,7 +639,7 @@ static int mt9v022_video_probe(struct i2c_client *client)
> mt9v022->fmt = &mt9v022->fmts[0];
>
> dev_info(&client->dev, "Detected a MT9V022 chip ID %x, %s sensor\n",
> - data, mt9v022->model == V4L2_IDENT_MT9V022IX7ATM ?
> + chip_id, mt9v022->model == V4L2_IDENT_MT9V022IX7ATM ?
> "monochrome" : "colour");
>
> ret = mt9v022_init(client);
> @@ -728,7 +735,8 @@ static int mt9v022_s_mbus_config(struct v4l2_subdev *sd,
> if (!(flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH))
> pixclk |= 0x2;
>
> - ret = reg_write(client, MT9V022_PIXCLK_FV_LV, pixclk);
> + ret = reg_write(client, (chip_id == 0x1324) ? MT9V024_PIXCLK_FV_LV :
> + MT9V022_PIXCLK_FV_LV, pixclk);
> if (ret < 0)
> return ret;
>
> --
> 1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
