On Fri, 23 Nov 2012, Albert Wang wrote:
> This patch adds the dma burst size config support for marvell-ccic.
> Developer can set the dma burst size in specified board driver.
>
> Signed-off-by: Libin Yang <lby...@marvell.com>
> Signed-off-by: Albert Wang <twan...@marvell.com>
> ---
> .../media/platform/marvell-ccic/mcam-core-soc.c | 2 +-
> drivers/media/platform/marvell-ccic/mcam-core.h | 7 ++++---
> drivers/media/platform/marvell-ccic/mmp-driver.c | 11 +++++++++++
> include/media/mmp-camera.h | 1 +
> 4 files changed, 17 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/media/platform/marvell-ccic/mcam-core-soc.c
> b/drivers/media/platform/marvell-ccic/mcam-core-soc.c
> index a0df8b4..518e6dc 100644
> --- a/drivers/media/platform/marvell-ccic/mcam-core-soc.c
> +++ b/drivers/media/platform/marvell-ccic/mcam-core-soc.c
> @@ -100,7 +100,7 @@ static int mcam_camera_add_device(struct
> soc_camera_device *icd)
> mcam_ctlr_stop(mcam);
> mcam_set_config_needed(mcam, 1);
> mcam_reg_write(mcam, REG_CTRL1,
> - C1_RESERVED | C1_DMAPOSTED);
> + mcam->burst | C1_RESERVED | C1_DMAPOSTED);
> mcam_reg_write(mcam, REG_CLKCTRL,
> (mcam->mclk_src << 29) | mcam->mclk_div);
> cam_dbg(mcam, "camera: set sensor mclk = %dMHz\n", mcam->mclk_min);
> diff --git a/drivers/media/platform/marvell-ccic/mcam-core.h
> b/drivers/media/platform/marvell-ccic/mcam-core.h
> index e149aa3..999b581 100755
> --- a/drivers/media/platform/marvell-ccic/mcam-core.h
> +++ b/drivers/media/platform/marvell-ccic/mcam-core.h
> @@ -132,6 +132,7 @@ struct mcam_camera {
> short int use_smbus; /* SMBUS or straight I2c? */
> enum mcam_buffer_mode buffer_mode;
>
> + int burst;
> int mclk_min;
> int mclk_src;
> int mclk_div;
> @@ -419,9 +420,9 @@ int mcam_soc_camera_host_register(struct mcam_camera
> *mcam);
> #define C1_DESC_3WORD 0x00000200 /* Three-word descriptors used */
> #define C1_444ALPHA 0x00f00000 /* Alpha field in RGB444 */
> #define C1_ALPHA_SHFT 20
> -#define C1_DMAB32 0x00000000 /* 32-byte DMA burst */
> -#define C1_DMAB16 0x02000000 /* 16-byte DMA burst */
> -#define C1_DMAB64 0x04000000 /* 64-byte DMA burst */
> +#define C1_DMAB64 0x00000000 /* 64-byte DMA burst */
> +#define C1_DMAB128 0x02000000 /* 128-byte DMA burst */
> +#define C1_DMAB256 0x04000000 /* 256-byte DMA burst */
Was this a bug in the driver or is it a different IP version?
Thanks
Guennadi
> #define C1_DMAB_MASK 0x06000000
> #define C1_TWOBUFS 0x08000000 /* Use only two DMA buffers */
> #define C1_PWRDWN 0x10000000 /* Power down */
> diff --git a/drivers/media/platform/marvell-ccic/mmp-driver.c
> b/drivers/media/platform/marvell-ccic/mmp-driver.c
> index bea7224..e840941 100755
> --- a/drivers/media/platform/marvell-ccic/mmp-driver.c
> +++ b/drivers/media/platform/marvell-ccic/mmp-driver.c
> @@ -365,6 +365,17 @@ static int mmpcam_probe(struct platform_device *pdev)
> mcam->dphy = &(pdata->dphy);
> mcam->mipi_enabled = 0;
> mcam->lane = pdata->lane;
> + switch (pdata->dma_burst) {
> + case 128:
> + mcam->burst = C1_DMAB128;
> + break;
> + case 256:
> + mcam->burst = C1_DMAB256;
> + break;
> + default:
> + mcam->burst = C1_DMAB64;
> + break;
> + }
> INIT_LIST_HEAD(&mcam->buffers);
>
> /*
> diff --git a/include/media/mmp-camera.h b/include/media/mmp-camera.h
> index 731f81f..7a5e63c 100755
> --- a/include/media/mmp-camera.h
> +++ b/include/media/mmp-camera.h
> @@ -11,6 +11,7 @@ struct mmp_camera_platform_data {
> int mclk_src;
> int mclk_div;
> int chip_id;
> + int dma_burst;
> /*
> * MIPI support
> */
> --
> 1.7.9.5
>
---
Guennadi Liakhovetski, Ph.D.
Freelance Open-Source Software Developer
http://www.open-technology.de/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
