On Thu, Feb 13, 2014 at 6:40 PM, Hans Verkuil <hverk...@xs4all.nl> wrote:
> From: Hans Verkuil <hans.verk...@cisco.com>
>
> In commit 02f142ecd24aaf891324ffba8527284c1731b561 support was added to
> start_streaming to return -ENOBUFS if insufficient buffers were queued
> for the DMA engine to start. The vb2 core would attempt calling
> start_streaming again if another buffer would be queued up.
>
> Later analysis uncovered problems with the queue management if start_streaming
> would return an error: the buffers are enqueued to the driver before the
> start_streaming op is called, so after an error they are never returned to
> the vb2 core. The solution for this is to let the driver return them to
> the vb2 core in case of an error while starting the DMA engine. However,
> in the case of -ENOBUFS that would be weird: it is not a real error, it
> just says that more buffers are needed. Requiring start_streaming to give
> them back only to have them requeued again the next time the application
> calls QBUF is inefficient.
>
> This patch changes this mechanism: it adds a 'min_buffers_needed' field
> to vb2_queue that drivers can set with the minimum number of buffers
> required to start the DMA engine. The start_streaming op is only called
> if enough buffers are queued. The -ENOBUFS handling has been dropped in
> favor of this new method.
>
> Drivers are expected to return buffers back to vb2 core with state QUEUED
> if start_streaming would return an error. The vb2 core checks for this
> and produces a warning if that didn't happen and it will forcefully
> reclaim such buffers to ensure that the internal vb2 core state remains
> consistent and all buffer-related resources have been correctly freed
> and all op callss have been balanced.
s/callss/calls/
>
> Signed-off-by: Hans Verkuil <hans.verk...@cisco.com>
> ---
> drivers/media/platform/davinci/vpbe_display.c | 6 +-
> drivers/media/platform/davinci/vpif_capture.c | 7 +-
> drivers/media/platform/davinci/vpif_display.c | 7 +-
> drivers/media/platform/s5p-tv/mixer_video.c | 6 +-
> drivers/media/v4l2-core/videobuf2-core.c | 130
> ++++++++++++++++--------
> drivers/staging/media/davinci_vpfe/vpfe_video.c | 3 +-
> include/media/videobuf2-core.h | 14 ++-
> 7 files changed, 100 insertions(+), 73 deletions(-)
>
> diff --git a/drivers/media/platform/davinci/vpbe_display.c
> b/drivers/media/platform/davinci/vpbe_display.c
> index b02aba4..9231e48 100644
> --- a/drivers/media/platform/davinci/vpbe_display.c
> +++ b/drivers/media/platform/davinci/vpbe_display.c
> @@ -344,11 +344,6 @@ static int vpbe_start_streaming(struct vb2_queue *vq,
> unsigned int count)
> struct vpbe_device *vpbe_dev = fh->disp_dev->vpbe_dev;
> int ret;
>
> - /* If buffer queue is empty, return error */
> - if (list_empty(&layer->dma_queue)) {
> - v4l2_err(&vpbe_dev->v4l2_dev, "buffer queue is empty\n");
> - return -ENOBUFS;
> - }
> /* Get the next frame from the buffer queue */
> layer->next_frm = layer->cur_frm = list_entry(layer->dma_queue.next,
> struct vpbe_disp_buffer, list);
> @@ -1416,6 +1411,7 @@ static int vpbe_display_reqbufs(struct file *file, void
> *priv,
> q->mem_ops = &vb2_dma_contig_memops;
> q->buf_struct_size = sizeof(struct vpbe_disp_buffer);
> q->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
> + q->min_buffers_needed = 1;
>
> ret = vb2_queue_init(q);
> if (ret) {
> diff --git a/drivers/media/platform/davinci/vpif_capture.c
> b/drivers/media/platform/davinci/vpif_capture.c
> index 735ec47..9731ad4 100644
> --- a/drivers/media/platform/davinci/vpif_capture.c
> +++ b/drivers/media/platform/davinci/vpif_capture.c
> @@ -272,13 +272,7 @@ static int vpif_start_streaming(struct vb2_queue *vq,
> unsigned int count)
> unsigned long flags;
> int ret;
>
> - /* If buffer queue is empty, return error */
> spin_lock_irqsave(&common->irqlock, flags);
> - if (list_empty(&common->dma_queue)) {
> - spin_unlock_irqrestore(&common->irqlock, flags);
> - vpif_dbg(1, debug, "buffer queue is empty\n");
> - return -ENOBUFS;
> - }
>
> /* Get the next frame from the buffer queue */
> common->cur_frm = common->next_frm =
> list_entry(common->dma_queue.next,
> @@ -1024,6 +1018,7 @@ static int vpif_reqbufs(struct file *file, void *priv,
> q->mem_ops = &vb2_dma_contig_memops;
> q->buf_struct_size = sizeof(struct vpif_cap_buffer);
> q->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
> + q->min_buffers_needed = 1;
>
> ret = vb2_queue_init(q);
> if (ret) {
> diff --git a/drivers/media/platform/davinci/vpif_display.c
> b/drivers/media/platform/davinci/vpif_display.c
> index 9d115cd..af660f5 100644
> --- a/drivers/media/platform/davinci/vpif_display.c
> +++ b/drivers/media/platform/davinci/vpif_display.c
> @@ -234,13 +234,7 @@ static int vpif_start_streaming(struct vb2_queue *vq,
> unsigned int count)
> unsigned long flags;
> int ret;
>
> - /* If buffer queue is empty, return error */
> spin_lock_irqsave(&common->irqlock, flags);
> - if (list_empty(&common->dma_queue)) {
> - spin_unlock_irqrestore(&common->irqlock, flags);
> - vpif_err("buffer queue is empty\n");
> - return -ENOBUFS;
> - }
>
> /* Get the next frame from the buffer queue */
> common->next_frm = common->cur_frm =
> @@ -984,6 +978,7 @@ static int vpif_reqbufs(struct file *file, void *priv,
> q->mem_ops = &vb2_dma_contig_memops;
> q->buf_struct_size = sizeof(struct vpif_disp_buffer);
> q->timestamp_type = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
> + q->min_buffers_needed = 1;
>
> ret = vb2_queue_init(q);
> if (ret) {
> diff --git a/drivers/media/platform/s5p-tv/mixer_video.c
> b/drivers/media/platform/s5p-tv/mixer_video.c
> index c5059ba..a1ce55f 100644
> --- a/drivers/media/platform/s5p-tv/mixer_video.c
> +++ b/drivers/media/platform/s5p-tv/mixer_video.c
> @@ -946,11 +946,6 @@ static int start_streaming(struct vb2_queue *vq,
> unsigned int count)
>
> mxr_dbg(mdev, "%s\n", __func__);
>
> - if (count == 0) {
> - mxr_dbg(mdev, "no output buffers queued\n");
> - return -ENOBUFS;
> - }
> -
> /* block any changes in output configuration */
> mxr_output_get(mdev);
>
> @@ -1124,6 +1119,7 @@ struct mxr_layer *mxr_base_layer_create(struct
> mxr_device *mdev,
> .drv_priv = layer,
> .buf_struct_size = sizeof(struct mxr_buffer),
> .ops = &mxr_video_qops,
> + .min_buffers_needed = 1,
> .mem_ops = &vb2_dma_contig_memops,
> };
>
> diff --git a/drivers/media/v4l2-core/videobuf2-core.c
> b/drivers/media/v4l2-core/videobuf2-core.c
> index 6af76ee..1dd2b05 100644
> --- a/drivers/media/v4l2-core/videobuf2-core.c
> +++ b/drivers/media/v4l2-core/videobuf2-core.c
> @@ -1033,13 +1033,20 @@ EXPORT_SYMBOL_GPL(vb2_plane_cookie);
> * vb2_buffer_done() - inform videobuf that an operation on a buffer is
> finished
> * @vb: vb2_buffer returned from the driver
> * @state: either VB2_BUF_STATE_DONE if the operation finished
> successfully
> - * or VB2_BUF_STATE_ERROR if the operation finished with an error
> + * or VB2_BUF_STATE_ERROR if the operation finished with an
> error.
> + * If start_streaming fails then it should return buffers with
> state
> + * VB2_BUF_STATE_QUEUED to put them back into the queue.
> *
> * This function should be called by the driver after a hardware operation on
> * a buffer is finished and the buffer may be returned to userspace. The
> driver
> * cannot use this buffer anymore until it is queued back to it by videobuf
> * by the means of buf_queue callback. Only buffers previously queued to the
> * driver by buf_queue can be passed to this function.
> + *
> + * While streaming a buffer can only be returned in state DONE or ERROR.
> + * The start_streaming op can also return them in case the DMA engine cannot
> + * be started for some reason. In that case the buffers should be returned
> with
> + * state QUEUED.
> */
> void vb2_buffer_done(struct vb2_buffer *vb, enum vb2_buffer_state state)
> {
> @@ -1047,11 +1054,17 @@ void vb2_buffer_done(struct vb2_buffer *vb, enum
> vb2_buffer_state state)
> unsigned long flags;
> unsigned int plane;
>
> - if (vb->state != VB2_BUF_STATE_ACTIVE)
> + if (WARN_ON(vb->state != VB2_BUF_STATE_ACTIVE))
> return;
>
> - if (state != VB2_BUF_STATE_DONE && state != VB2_BUF_STATE_ERROR)
> - return;
> + if (!q->start_streaming_called) {
> + if (WARN_ON(state != VB2_BUF_STATE_QUEUED))
> + state = VB2_BUF_STATE_QUEUED;
> + } else if (!WARN_ON(!q->start_streaming_called)) {
> + if (WARN_ON(state != VB2_BUF_STATE_DONE &&
> + state != VB2_BUF_STATE_ERROR))
> + state = VB2_BUF_STATE_ERROR;
> + }
>
> #ifdef CONFIG_VIDEO_ADV_DEBUG
> /*
> @@ -1070,12 +1083,14 @@ void vb2_buffer_done(struct vb2_buffer *vb, enum
> vb2_buffer_state state)
> /* Add the buffer to the done buffers list */
> spin_lock_irqsave(&q->done_lock, flags);
> vb->state = state;
> - list_add_tail(&vb->done_entry, &q->done_list);
> + if (state != VB2_BUF_STATE_QUEUED)
> + list_add_tail(&vb->done_entry, &q->done_list);
> atomic_dec(&q->owned_by_drv_count);
> spin_unlock_irqrestore(&q->done_lock, flags);
>
> /* Inform any processes that may be waiting for buffers */
> - wake_up(&q->done_wq);
> + if (state != VB2_BUF_STATE_QUEUED)
> + wake_up(&q->done_wq);
Perhaps:
if (state == VB2_BUF_STATE_QUEUED)
return;
/* Inform any processes that may be waiting for buffers */
wake_up(&q->done_wq);
> }
> EXPORT_SYMBOL_GPL(vb2_buffer_done);
>
> @@ -1544,34 +1559,49 @@ EXPORT_SYMBOL_GPL(vb2_prepare_buf);
> * vb2_start_streaming() - Attempt to start streaming.
> * @q: videobuf2 queue
> *
> - * If there are not enough buffers, then retry_start_streaming is set to
> - * 1 and 0 is returned. The next time a buffer is queued and
> - * retry_start_streaming is 1, this function will be called again to
> - * retry starting the DMA engine.
> + * Attempt to start streaming. When this function is called there must be
> + * at least q->min_buffers_needed buffers queued up (i.e. the minimum
> + * number of buffers required for the DMA engine to function). If the
> + * @start_streaming op fails it is supposed to return all the driver-owned
> + * buffers back to vb2 in state QUEUED. Check if that happened and if
> + * not warn and reclaim them forcefully.
> */
> static int vb2_start_streaming(struct vb2_queue *q)
> {
> + struct vb2_buffer *vb;
> int ret;
>
> - /* Tell the driver to start streaming */
> - ret = call_qop(q, start_streaming, q,
> atomic_read(&q->owned_by_drv_count));
> - if (ret)
> - fail_qop(q, start_streaming);
> -
> /*
> - * If there are not enough buffers queued to start streaming, then
> - * the start_streaming operation will return -ENOBUFS and you have to
> - * retry when the next buffer is queued.
> + * If any buffers were queued before streamon,
> + * we can now pass them to driver for processing.
> */
> - if (ret == -ENOBUFS) {
> - dprintk(1, "qbuf: not enough buffers, retry when more buffers
> are queued.\n");
> - q->retry_start_streaming = 1;
> + list_for_each_entry(vb, &q->queued_list, queued_entry)
> + __enqueue_in_driver(vb);
> +
> + /* Tell the driver to start streaming */
> + ret = call_qop(q, start_streaming, q,
> + atomic_read(&q->owned_by_drv_count));
> + q->start_streaming_called = ret == 0;
> + if (!ret)
> return 0;
> +
> + fail_qop(q, start_streaming);
> + dprintk(1, "qbuf: driver refused to start streaming\n");
> + if (WARN_ON(atomic_read(&q->owned_by_drv_count))) {
> + unsigned i;
> +
> + /*
> + * Forcefully reclaim buffers if the driver did not
> + * correctly return them to vb2.
> + */
> + for (i = 0; i < q->num_buffers; ++i) {
> + vb = q->bufs[i];
> + if (vb->state == VB2_BUF_STATE_ACTIVE)
> + vb2_buffer_done(vb, VB2_BUF_STATE_QUEUED);
> + }
> + /* Must be zero now */
> + WARN_ON(atomic_read(&q->owned_by_drv_count));
> }
> - if (ret)
> - dprintk(1, "qbuf: driver refused to start streaming\n");
> - else
> - q->retry_start_streaming = 0;
> return ret;
> }
>
> @@ -1611,19 +1641,26 @@ static int vb2_internal_qbuf(struct vb2_queue *q,
> struct v4l2_buffer *b)
> * dequeued in dqbuf.
> */
> list_add_tail(&vb->queued_entry, &q->queued_list);
> + q->queued_count++;
> vb->state = VB2_BUF_STATE_QUEUED;
>
> /*
> * If already streaming, give the buffer to driver for processing.
> * If not, the buffer will be given to driver on next streamon.
> */
> - if (q->streaming)
> + if (q->start_streaming_called)
> __enqueue_in_driver(vb);
>
> /* Fill buffer information for the userspace */
> __fill_v4l2_buffer(vb, b);
>
> - if (q->retry_start_streaming) {
> + /*
> + * If we haven't yet started streaming and if we have the
The comment about "starting streaming" is confusing. Please say: "if
streamon was called, but we couldn't call start_streaming due to
insufficient number of buffers queued, do so now", or something
similar.
> + * minimum number of required buffers available, then start
> + * streaming.
> + */
> + if (q->streaming && !q->start_streaming_called &&
> + q->queued_count >= q->min_buffers_needed) {
> ret = vb2_start_streaming(q);
> if (ret)
> return ret;
> @@ -1778,7 +1815,7 @@ int vb2_wait_for_all_buffers(struct vb2_queue *q)
> return -EINVAL;
> }
>
> - if (!q->retry_start_streaming)
> + if (q->start_streaming_called)
> wait_event(q->done_wq, !atomic_read(&q->owned_by_drv_count));
> return 0;
> }
> @@ -1839,6 +1876,7 @@ static int vb2_internal_dqbuf(struct vb2_queue *q,
> struct v4l2_buffer *b, bool n
> __fill_v4l2_buffer(vb, b);
> /* Remove from videobuf queue */
> list_del(&vb->queued_entry);
> + q->queued_count--;
> /* go back to dequeued state */
> __vb2_dqbuf(vb);
>
> @@ -1889,18 +1927,23 @@ static void __vb2_queue_cancel(struct vb2_queue *q)
> {
> unsigned int i;
>
> - if (q->retry_start_streaming) {
> - q->retry_start_streaming = 0;
> - q->streaming = 0;
> - }
> -
> /*
> * Tell driver to stop all transactions and release all queued
> * buffers.
> */
> - if (q->streaming)
> + if (q->start_streaming_called)
> call_qop(q, stop_streaming, q);
> q->streaming = 0;
> + q->start_streaming_called = 0;
> + q->queued_count = 0;
> +
> + if (WARN_ON(atomic_read(&q->owned_by_drv_count))) {
> + for (i = 0; i < q->num_buffers; ++i)
> + if (q->bufs[i]->state == VB2_BUF_STATE_ACTIVE)
> + vb2_buffer_done(q->bufs[i],
> VB2_BUF_STATE_ERROR);
> + /* Must be zero now */
> + WARN_ON(atomic_read(&q->owned_by_drv_count));
> + }
>
> /*
> * Remove all buffers from videobuf's list...
> @@ -1923,7 +1966,6 @@ static void __vb2_queue_cancel(struct vb2_queue *q)
>
> static int vb2_internal_streamon(struct vb2_queue *q, enum v4l2_buf_type
> type)
> {
> - struct vb2_buffer *vb;
> int ret;
>
> if (type != q->type) {
> @@ -1937,17 +1979,15 @@ static int vb2_internal_streamon(struct vb2_queue *q,
> enum v4l2_buf_type type)
> }
>
> /*
> - * If any buffers were queued before streamon,
> - * we can now pass them to driver for processing.
> + * Tell driver to start streaming provided sufficient buffers
> + * are available.
> */
> - list_for_each_entry(vb, &q->queued_list, queued_entry)
> - __enqueue_in_driver(vb);
> -
> - /* Tell driver to start streaming. */
> - ret = vb2_start_streaming(q);
> - if (ret) {
> - __vb2_queue_cancel(q);
> - return ret;
> + if (q->queued_count >= q->min_buffers_needed) {
> + ret = vb2_start_streaming(q);
> + if (ret) {
> + __vb2_queue_cancel(q);
> + return ret;
> + }
> }
>
> q->streaming = 1;
> diff --git a/drivers/staging/media/davinci_vpfe/vpfe_video.c
> b/drivers/staging/media/davinci_vpfe/vpfe_video.c
> index 1f3b0f9..8c101cb 100644
> --- a/drivers/staging/media/davinci_vpfe/vpfe_video.c
> +++ b/drivers/staging/media/davinci_vpfe/vpfe_video.c
> @@ -1201,8 +1201,6 @@ static int vpfe_start_streaming(struct vb2_queue *vq,
> unsigned int count)
> unsigned long addr;
> int ret;
>
> - if (count == 0)
> - return -ENOBUFS;
> ret = mutex_lock_interruptible(&video->lock);
> if (ret)
> goto streamoff;
> @@ -1327,6 +1325,7 @@ static int vpfe_reqbufs(struct file *file, void *priv,
> q->type = req_buf->type;
> q->io_modes = VB2_MMAP | VB2_USERPTR;
> q->drv_priv = fh;
> + q->min_buffers_needed = 1;
> q->ops = &video_qops;
> q->mem_ops = &vb2_dma_contig_memops;
> q->buf_struct_size = sizeof(struct vpfe_cap_buffer);
> diff --git a/include/media/videobuf2-core.h b/include/media/videobuf2-core.h
> index adaffed..2ada71b 100644
> --- a/include/media/videobuf2-core.h
> +++ b/include/media/videobuf2-core.h
> @@ -348,20 +348,24 @@ struct v4l2_fh;
> * @gfp_flags: additional gfp flags used when allocating the buffers.
> * Typically this is 0, but it may be e.g. GFP_DMA or __GFP_DMA32
> * to force the buffer allocation to a specific memory zone.
> + * @min_buffers_needed: the minimum number of buffers needed before
> + * start_streaming() can be called. Used when a DMA engine
> + * cannot be started unless at least this number of buffers
> + * have been queued into the driver.
> *
> * @memory: current memory type used
> * @bufs: videobuf buffer structures
> * @num_buffers: number of allocated/used buffers
> * @queued_list: list of buffers currently queued from userspace
> + * @queued_count: number of buffers queued and ready for streaming.
> * @owned_by_drv_count: number of buffers owned by the driver
> * @done_list: list of buffers ready to be dequeued to userspace
> * @done_lock: lock to protect done_list list
> * @done_wq: waitqueue for processes waiting for buffers ready to be
> dequeued
> * @alloc_ctx: memory type/allocator-specific contexts for each plane
> * @streaming: current streaming state
> - * @retry_start_streaming: start_streaming() was called, but there were not
> enough
> - * buffers queued. If set, then retry calling start_streaming
> when
> - * queuing a new buffer.
> + * @start_streaming_called: start_streaming() was called successfully and we
> + * started streaming.
> * @fileio: file io emulator internal data, used only if emulator is
> active
> */
> struct vb2_queue {
> @@ -377,6 +381,7 @@ struct vb2_queue {
> unsigned int buf_struct_size;
> u32 timestamp_type;
> gfp_t gfp_flags;
> + u32 min_buffers_needed;
Perhaps add a WARN_ON or even clamp this if queue_setup requests less
buffers than this?
>
> /* private: internal use only */
> enum v4l2_memory memory;
> @@ -384,6 +389,7 @@ struct vb2_queue {
> unsigned int num_buffers;
>
> struct list_head queued_list;
> + unsigned int queued_count;
>
> atomic_t owned_by_drv_count;
> struct list_head done_list;
> @@ -394,7 +400,7 @@ struct vb2_queue {
> unsigned int plane_sizes[VIDEO_MAX_PLANES];
>
> unsigned int streaming:1;
> - unsigned int retry_start_streaming:1;
> + unsigned int start_streaming_called:1;
>
> struct vb2_fileio_data *fileio;
>
> --
> 1.8.4.rc3
>
--
Best regards,
Pawel Osciak
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
