Hi,
On Friday 07 March 2014 06:29 PM, Hans Verkuil wrote:
Do you think I can go ahead with posting the v3 patch set for 3.15, and
work on fixing the compliance issue for the -rc fixes?
It's fine to upstream this in staging, but while not all compliance errors
are fixed it can't go to drivers/media. I'm tightening the screws on that
since v4l2-compliance is getting to be such a powerful tool for ensuring
the driver complies.
But the vpe driver is already in drivers/media. How do I push these
patches if the vpe drivers is not in staging?
<snip>
Multiplanar: TRY_FMT(G_FMT) != G_FMT
test VIDIOC_TRY_FMT: FAIL
warn: v4l2-test-formats.cpp(834): S_FMT cannot handle
an invalid pixelformat.
warn: v4l2-test-formats.cpp(835): This may or may not
be a problem. For more information see:
warn: v4l2-test-formats.cpp(836):
http://www.mail-archive.com/linux-media@vger.kernel.org/msg56550.html
fail: v4l2-test-formats.cpp(420): pix_mp.reserved not
zeroed
This is easy enough to fix.
fail: v4l2-test-formats.cpp(851): Video Capture
Multiplanar is valid, but no S_FMT was implemented
For the FMT things: run with -T: that gives nice traces. You can also
set the debug flag: echo 2 >/sys/class/video4linux/video0/debug to see all
ioctls in more detail.
Thanks for the tip, will try this.
test VIDIOC_S_FMT: FAIL
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
info: test buftype Video Capture Multiplanar
warn: v4l2-test-buffers.cpp(403): VIDIOC_CREATE_BUFS
not supported
info: test buftype Video Output Multiplanar
warn: v4l2-test-buffers.cpp(403): VIDIOC_CREATE_BUFS
not supported
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK (Not Supported)
test read/write: OK (Not Supported)
Video Capture Multiplanar (polling):
Buffer: 0 Sequence: 0 Field: Top Timestamp: 113.178208s
fail: v4l2-test-buffers.cpp(222): buf.field !=
cur_fmt.fmt.pix.field
Definitely needs to be fixed, you probably just don't set the field at all.
The VPE output is always progressive. But yes, I should still set the
field parameter to something.
Thanks,
Archit
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
