On 12.03.2014 14:26, Antti Palosaari wrote:
On 12.03.2014 13:02, Mauro Carvalho Chehab wrote:
Em Mon, 10 Mar 2014 12:01:28 +0200
Antti Palosaari <cr...@iki.fi> escreveu:
On 05.03.2014 20:49, Mauro Carvalho Chehab wrote:
Em Thu, 27 Feb 2014 02:22:06 +0200
Antti Palosaari <cr...@iki.fi> escreveu:
Add documentation for RF tuner bandwidth controls. These controls are
used to set filters on tuner signal path.
Cc: Hans Verkuil <hverk...@xs4all.nl>
Signed-off-by: Antti Palosaari <cr...@iki.fi>
---
Documentation/DocBook/media/v4l/controls.xml | 19
+++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/Documentation/DocBook/media/v4l/controls.xml
b/Documentation/DocBook/media/v4l/controls.xml
index 6c9dbf6..5550fea 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -5007,6 +5007,25 @@ descriptor. Calling &VIDIOC-QUERYCTRL; for
this control will return a
description of this control class.</entry>
</row>
<row>
+ <entry
spanname="id"><constant>V4L2_CID_RF_TUNER_BANDWIDTH_AUTO</constant> </entry>
+ <entry>boolean</entry>
+ </row>
+ <row>
+ <entry spanname="descr">Enables/disables tuner radio
channel
+bandwidth configuration. In automatic mode bandwidth configuration
is performed
+by the driver.</entry>
+ </row>
+ <row>
+ <entry
spanname="id"><constant>V4L2_CID_RF_TUNER_BANDWIDTH</constant> </entry>
+ <entry>integer</entry>
+ </row>
+ <row>
+ <entry spanname="descr">Filter(s) on tuner signal
path are used to
+filter signal according to receiving party needs. Driver
configures filters to
+fulfill desired bandwidth requirement. Used when
V4L2_CID_RF_TUNER_BANDWIDTH_AUTO is not
+set. The range and step are driver-specific.</entry>
Huh? If this is enable/disable, why "the range and step are
driver-specific"?
Because there is two controls grouped. That is situation of having
AUTO/MANUAL.
V4L2_CID_RF_TUNER_BANDWIDTH_AUTO
V4L2_CID_RF_TUNER_BANDWIDTH
V4L2_CID_RF_TUNER_BANDWIDTH is valid only when
V4L2_CID_RF_TUNER_BANDWIDTH_AUTO == false.
Sorry, but I'm not understanding what you're arguing.
Yeah, it is clear at the patch that there are two controls, and that
V4L2_CID_RF_TUNER_BANDWIDTH is valid only when AUTO is disabled, but
this doesn't answer my question:
Why V4L2_CID_RF_TUNER_BANDWIDTH's range and step are driver-specific?
Hmmm. That control is used to configure RF filters. Filters set
bandwidth of radio channel. There is usually quite limited set of
available analog filters inside RF tuner. If you look for example
FC0012/FC0013 possible filters are 6/7/8 MHz. E4000 has something 4-11
MHz. If you look those very old 1st gen silicon tuners like QT1010 /
MT2060, there is no integrated filters at all - but there is external
saw filter which is usually 8MHz at 36.125 MHz IF.
Did you remember there is same parameter already in DVB API (struct
dtv_frontend_properties bandwidth_hz)? That is control is currently used
to set r820t, fc0012, fc10013 .bandwidth_hz value, e4000 implements it
correctly as own control.
I am quite astonished we have that big gap with our views.
Here is picture from GNU Radio UHD source (it is the original Ettus HW
GNU Radio was done AFAIK). Bandwidth is last control.
http://lists.gnu.org/archive/html/discuss-gnuradio/2010-12/pngqfPrwUmgsB.png
regards
Antti
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
