Hi Jacek,
A few comments below.
On Fri, Jan 09, 2015 at 04:22:58PM +0100, Jacek Anaszewski wrote:
> This patch adds led-flash support to Maxim max77693 chipset.
> A device can be exposed to user space through LED subsystem
> sysfs interface. Device supports up to two leds which can
> work in flash and torch mode. The leds can be triggered
> externally or by software.
>
> Signed-off-by: Jacek Anaszewski <j.anaszew...@samsung.com>
> Signed-off-by: Andrzej Hajda <a.ha...@samsung.com>
> Acked-by: Kyungmin Park <kyungmin.p...@samsung.com>
> Cc: Bryan Wu <coolo...@gmail.com>
> Cc: Richard Purdie <rpur...@rpsys.net>
> Cc: Lee Jones <lee.jo...@linaro.org>
> Cc: Chanwoo Choi <cw00.c...@samsung.com>
> ---
> drivers/leds/Kconfig | 10 +
> drivers/leds/Makefile | 1 +
> drivers/leds/leds-max77693.c | 1045
> ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 1056 insertions(+)
> create mode 100644 drivers/leds/leds-max77693.c
>
> diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
> index 95029df..ff9c21b 100644
> --- a/drivers/leds/Kconfig
> +++ b/drivers/leds/Kconfig
> @@ -464,6 +464,16 @@ config LEDS_TCA6507
> LED driver chips accessed via the I2C bus.
> Driver support brightness control and hardware-assisted blinking.
>
> +config LEDS_MAX77693
> + tristate "LED support for MAX77693 Flash"
> + depends on LEDS_CLASS_FLASH
> + depends on MFD_MAX77693
> + depends on OF
> + help
> + This option enables support for the flash part of the MAX77693
> + multifunction device. It has build in control for two leds in flash
> + and torch mode.
> +
> config LEDS_MAX8997
> tristate "LED support for MAX8997 PMIC"
> depends on LEDS_CLASS && MFD_MAX8997
> diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
> index cbba921..57ca62b 100644
> --- a/drivers/leds/Makefile
> +++ b/drivers/leds/Makefile
> @@ -52,6 +52,7 @@ obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o
> obj-$(CONFIG_LEDS_NS2) += leds-ns2.o
> obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o
> obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o
> +obj-$(CONFIG_LEDS_MAX77693) += leds-max77693.o
> obj-$(CONFIG_LEDS_MAX8997) += leds-max8997.o
> obj-$(CONFIG_LEDS_LM355x) += leds-lm355x.o
> obj-$(CONFIG_LEDS_BLINKM) += leds-blinkm.o
> diff --git a/drivers/leds/leds-max77693.c b/drivers/leds/leds-max77693.c
> new file mode 100644
> index 0000000..3ba07c4
> --- /dev/null
> +++ b/drivers/leds/leds-max77693.c
> @@ -0,0 +1,1045 @@
> +/*
> + * LED Flash class driver for the flash cell of max77693 mfd.
> + *
> + * Copyright (C) 2015, Samsung Electronics Co., Ltd.
> + *
> + * Authors: Jacek Anaszewski <j.anaszew...@samsung.com>
> + * Andrzej Hajda <a.ha...@samsung.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + */
> +
> +#include <asm/div64.h>
> +#include <linux/led-class-flash.h>
> +#include <linux/mfd/max77693.h>
> +#include <linux/mfd/max77693-private.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +#include <linux/slab.h>
> +#include <linux/workqueue.h>
> +
> +#define MODE_OFF 0
> +#define MODE_FLASH(a) (1 << (a))
> +#define MODE_TORCH(a) (1 << (2 + (a)))
> +#define MODE_FLASH_EXTERNAL(a) (1 << (4 + (a)))
> +
> +#define MODE_FLASH_MASK (MODE_FLASH(FLED1) | MODE_FLASH(FLED2)
> | \
> + MODE_FLASH_EXTERNAL(FLED1) | \
> + MODE_FLASH_EXTERNAL(FLED2))
> +#define MODE_TORCH_MASK (MODE_TORCH(FLED1) | MODE_TORCH(FLED2))
> +
> +#define FLED1_IOUT (1 << 0)
> +#define FLED2_IOUT (1 << 1)
> +
> +enum max77693_fled {
> + FLED1,
> + FLED2,
> +};
> +
> +enum max77693_led_mode {
> + FLASH,
> + TORCH,
> +};
> +
> +struct max77693_sub_led {
> + /* related FLED output identifier */
> + int fled_id;
> + /* related LED Flash class device */
> + struct led_classdev_flash fled_cdev;
> + /* assures led-triggers compatibility */
> + struct work_struct work_brightness_set;
> +
> + /* brightness cache */
> + unsigned int torch_brightness;
> + /* flash timeout cache */
> + unsigned int flash_timeout;
> +};
> +
> +struct max77693_led_device {
> + /* parent mfd regmap */
> + struct regmap *regmap;
> + /* platform device data */
> + struct platform_device *pdev;
> + /* configuration data for the device */
> + struct max77693_led_config_data *cfg_data;
Where is this defined?
> + /* secures access to the device */
> + struct mutex lock;
> +
> + /* sub led data */
> + struct max77693_sub_led sub_leds[2];
> +
> + /* current flash timeout cache */
> + unsigned int current_flash_timeout;
> + /* ITORCH register cache */
> + u8 torch_iout_reg;
> + /* mode of fled outputs */
> + unsigned int mode_flags;
> + /* recently strobed fled */
> + int strobing_sub_led_id;
> + /* bitmask of fled outputs use state (bit 0. - FLED1, bit 1. - FLED2) */
> + u8 fled_mask;
> + /* fled modes that can be set */
> + u8 allowed_modes;
> +
> + /* arrangement of current outputs */
> + bool iout_joint;
> +};
> +
> +struct max77693_led_settings {
> + struct led_flash_setting torch_brightness;
> + struct led_flash_setting flash_brightness;
> + struct led_flash_setting flash_timeout;
> +};
> +
> +static u8 max77693_led_iout_to_reg(u32 ua)
> +{
> + if (ua < FLASH_IOUT_MIN)
> + ua = FLASH_IOUT_MIN;
> + return (ua - FLASH_IOUT_MIN) / FLASH_IOUT_STEP;
> +}
> +
> +static u8 max77693_flash_timeout_to_reg(u32 us)
> +{
> + return (us - FLASH_TIMEOUT_MIN) / FLASH_TIMEOUT_STEP;
> +}
> +
> +static inline struct max77693_sub_led *flcdev_to_sub_led(
> + struct led_classdev_flash *fled_cdev)
> +{
> + return container_of(fled_cdev, struct max77693_sub_led, fled_cdev);
> +}
> +
> +static inline struct max77693_led_device *sub_led_to_led(
> + struct max77693_sub_led *sub_led)
> +{
> + return container_of(sub_led, struct max77693_led_device,
> + sub_leds[sub_led->fled_id]);
> +}
> +
> +static inline u8 max77693_led_vsys_to_reg(u32 mv)
> +{
> + return ((mv - MAX_FLASH1_VSYS_MIN) / MAX_FLASH1_VSYS_STEP) << 2;
> +}
> +
> +static inline u8 max77693_led_vout_to_reg(u32 mv)
> +{
> + return (mv - FLASH_VOUT_MIN) / FLASH_VOUT_STEP + FLASH_VOUT_RMIN;
> +}
> +
> +static inline bool max77693_fled_used(struct max77693_led_device *led,
> + int fled_id)
> +{
> + u8 fled_bit = (fled_id == FLED1) ? FLED1_IOUT : FLED2_IOUT;
> +
> + return led->fled_mask & fled_bit;
> +}
> +
> +/* split composite current @i into two @iout according to @imax weights */
Do you still consider this as the right thing to do?
If there's a single LED driven by multiple outputs, what is the value
provided by board-specific current distribution between these outputs?
> +static void __max77693_calc_iout(u32 iout[2], u32 i, u32 imax[2])
> +{
> + u64 t = i;
> +
> + t *= imax[1];
> + do_div(t, imax[0] + imax[1]);
> +
> + iout[1] = (u32)t / FLASH_IOUT_STEP * FLASH_IOUT_STEP;
> + iout[0] = i - iout[1];
> +}
> +
> +static int max77693_set_mode(struct max77693_led_device *led, u8 mode)
> +{
> + struct regmap *rmap = led->regmap;
> + int ret, v = 0, i;
> +
> + for (i = FLED1; i <= FLED2; ++i) {
> + if (mode & MODE_TORCH(i))
> + v |= FLASH_EN_ON << TORCH_EN_SHIFT(i);
> +
> + if (mode & MODE_FLASH(i)) {
> + v |= FLASH_EN_ON << FLASH_EN_SHIFT(i);
> + } else if (mode & MODE_FLASH_EXTERNAL(i)) {
> + v |= FLASH_EN_FLASH << FLASH_EN_SHIFT(i);
> + /*
> + * Enable hw triggering also for torch mode, as some
> + * camera sensors use torch led to fathom ambient light
> + * conditions before strobing the flash.
> + */
> + v |= FLASH_EN_TORCH << TORCH_EN_SHIFT(i);
> + }
> + }
> +
> + /* Reset the register only prior setting flash modes */
> + if (mode & ~(MODE_TORCH(FLED1) | MODE_TORCH(FLED2))) {
> + ret = regmap_write(rmap, MAX77693_LED_REG_FLASH_EN, 0);
> + if (ret < 0)
> + return ret;
> + }
> +
> + return regmap_write(rmap, MAX77693_LED_REG_FLASH_EN, v);
> +}
> +
> +static void max77693_set_sync_strobe(struct max77693_led_device *led,
> + u8 *mode)
> +{
> + struct max77693_sub_led *sub_leds = led->sub_leds;
> + struct led_classdev_flash *fled_cdev;
> + u8 m = *mode;
> +
> + if (led->iout_joint)
> + return;
> +
> + /* Check if the other sub-led wants to be strobed simultaneously. */
> + if (m & (MODE_FLASH(FLED1) | MODE_FLASH_EXTERNAL(FLED1))) {
> + fled_cdev = &sub_leds[FLED2].fled_cdev;
> + if (fled_cdev->sync_led_id)
> + m |= m << 1;
> + } else if (m & (MODE_FLASH(FLED2) | MODE_FLASH_EXTERNAL(FLED2))) {
> + fled_cdev = &sub_leds[FLED1].fled_cdev;
> + if (fled_cdev->sync_led_id)
> + m |= m >> 1;
> + }
> +
> + *mode = m;
> +}
> +
> +static int max77693_add_mode(struct max77693_led_device *led, u8 mode)
> +{
> + int i, ret;
> +
> + mode &= led->allowed_modes;
> +
> + /*
> + * Torch mode once enabled remains active until turned off. If the FLED2
> + * output isn't to be disabled check if the torch mode to be set isn't
> + * already activated and avoid re-setting it.
> + */
> + if ((!(mode ^ led->mode_flags)) & MODE_TORCH(FLED2)) {
> + for (i = FLED1; i <= FLED2; ++i)
> + if ((mode & MODE_TORCH(i)) &&
> + (led->mode_flags & MODE_TORCH(i)))
> + return 0;
> + }
> +
> + /* Span the mode on FLED2 for joint iouts case */
> + if (led->iout_joint)
> + mode |= (mode << 1);
> +
> + /* Span the flash mode on the other led if it is to be synchronized */
> + max77693_set_sync_strobe(led, &mode);
> +
> + /*
> + * FLASH_EXTERNAL mode activates FLASHEN and TORCHEN pins in the device.
> + * The related register bits fields interfere with SW triggerred modes,
> + * thus clear them to ensure proper device configuration.
> + */
> + for (i = FLED1; i <= FLED2; ++i)
> + if (mode & MODE_FLASH_EXTERNAL(i))
> + led->mode_flags &= (~MODE_TORCH(i) & ~MODE_FLASH(i));
> +
> + led->mode_flags |= mode;
> + led->mode_flags &= led->allowed_modes;
> +
> + ret = max77693_set_mode(led, led->mode_flags);
> + if (ret < 0)
> + return ret;
> +
> + /*
> + * Clear flash mode flag after setting the mode to avoid spurious flash
> + * strobing on each subsequent torch mode setting.
> + */
> + if (mode & MODE_FLASH_MASK)
> + led->mode_flags &= ~mode;
> +
> + return ret;
> +}
> +
> +static int max77693_clear_mode(struct max77693_led_device *led,
> + u8 mode)
> +{
> + int ret;
> +
> + if (led->iout_joint)
> + /* Clear mode also on FLED2 for joint iouts case */
> + mode |= (mode << 1);
> + else
> + /*
> + * Clear a flash mode on the other led
> + * if it is to be synchronized.
> + */
> + max77693_set_sync_strobe(led, &mode);
> +
> + led->mode_flags &= ~mode;
> +
> + ret = max77693_set_mode(led, led->mode_flags);
> +
> + return ret;
> +}
> +
> +static void max77693_calc_iout(struct max77693_led_device *led, int fled_id,
> + u32 iout[2], u32 micro_amp, u32 iout_max[2],
> + enum max77693_led_mode mode)
> +{
> + u8 blocked_modes;
> +
> + if (fled_id == FLED1) {
> + if (led->iout_joint) {
> + /*
> + * FLED2 must not be turned on to get
> + * 15625 uA of total current.
> + */
> + if (micro_amp == FLASH_IOUT_MIN) {
> + if (mode == FLASH)
> + blocked_modes =
> + MODE_FLASH(FLED2) |
> + MODE_FLASH_EXTERNAL(FLED2);
> + else
> + blocked_modes = MODE_TORCH(FLED2);
> +
> + led->allowed_modes &= ~blocked_modes;
> + }
> + } else {
> + /*
> + * Preclude splitting current to FLED2 if we
> + * are driving two separate leds.
> + */
> + iout_max[FLED2] = 0;
> + }
> + __max77693_calc_iout(iout, micro_amp, iout_max);
> + } else if (fled_id == FLED2) {
> + /*
> + * Preclude splitting current to FLED1 if we
> + * are driving two separate leds.
> + */
> + iout_max[FLED1] = 0;
> + __max77693_calc_iout(iout, micro_amp, iout_max);
> + }
> +}
> +
> +static int max77693_set_torch_current(struct max77693_led_device *led,
> + int fled_id, u32 micro_amp)
> +{
> + struct max77693_led_config_data *cfg = led->cfg_data;
> + struct regmap *rmap = led->regmap;
> + u32 iout[2], iout_max[2];
> + u8 iout1_reg = 0, iout2_reg = 0;
> +
> + iout_max[FLED1] = cfg->iout_torch[FLED1];
> + iout_max[FLED2] = cfg->iout_torch[FLED2];
> +
> + led->allowed_modes |= MODE_TORCH_MASK;
> +
> + max77693_calc_iout(led, fled_id, iout, micro_amp, iout_max,
Could you use cfg->iout_torch directly?
> + TORCH);
> +
> + if (fled_id == FLED1 || led->iout_joint) {
> + iout1_reg = max77693_led_iout_to_reg(iout[FLED1]);
> + led->torch_iout_reg &= 0xf0;
I think it'd be cleaner to use register bit names and led-specific shift
here. Up to you.
> + }
> + if (fled_id == FLED2 || led->iout_joint) {
> + iout2_reg = max77693_led_iout_to_reg(iout[FLED2]);
> + led->torch_iout_reg &= 0x0f;
> + }
> +
> + led->torch_iout_reg |= ((iout1_reg << TORCH_IOUT1_SHIFT) |
> + (iout2_reg << TORCH_IOUT2_SHIFT));
> +
> + return regmap_write(rmap, MAX77693_LED_REG_ITORCH,
> + led->torch_iout_reg);
> +}
> +
> +static int max77693_set_flash_current(struct max77693_led_device *led,
> + int fled_id,
> + u32 micro_amp)
> +{
> + struct max77693_led_config_data *cfg = led->cfg_data;
> + struct regmap *rmap = led->regmap;
> + u32 iout[2], iout_max[2];
> + u8 iout1_reg, iout2_reg;
> + int ret = -EINVAL;
> +
> + iout_max[FLED1] = cfg->iout_flash[FLED1];
> + iout_max[FLED2] = cfg->iout_flash[FLED2];
> +
> + led->allowed_modes |= MODE_FLASH_MASK;
> +
> + max77693_calc_iout(led, fled_id, iout, micro_amp, iout_max,
> + FLASH);
> +
> + if (fled_id == FLED1 || led->iout_joint) {
> + iout1_reg = max77693_led_iout_to_reg(iout[FLED1]);
> + ret = regmap_write(rmap, MAX77693_LED_REG_IFLASH1,
> + iout1_reg);
> + if (ret < 0)
> + return ret;
> + }
> + if (fled_id == FLED2 || led->iout_joint) {
> + iout2_reg = max77693_led_iout_to_reg(iout[FLED2]);
> + ret = regmap_write(rmap, MAX77693_LED_REG_IFLASH2,
> + iout2_reg);
> + }
> +
> + return ret;
> +}
> +
> +static int max77693_set_timeout(struct max77693_led_device *led, u32
> microsec)
> +{
> + struct max77693_led_config_data *cfg = led->cfg_data;
> + struct regmap *rmap = led->regmap;
> + u8 v;
> + int ret;
> +
> + v = max77693_flash_timeout_to_reg(microsec);
> +
> + if (cfg->trigger_type == MAX77693_LED_TRIG_TYPE_LEVEL)
> + v |= FLASH_TMR_LEVEL;
> +
> + ret = regmap_write(rmap, MAX77693_LED_REG_FLASH_TIMER, v);
> + if (ret < 0)
> + return ret;
> +
> + led->current_flash_timeout = microsec;
> +
> + return 0;
> +}
> +
> +static int max77693_strobe_status_get(struct max77693_led_device *led,
> + bool *state)
> +{
> + struct regmap *rmap = led->regmap;
> + unsigned int v;
> + int ret;
> +
> + ret = regmap_read(rmap, MAX77693_LED_REG_FLASH_STATUS, &v);
> + if (ret < 0)
> + return ret;
> +
> + *state = v & FLASH_STATUS_FLASH_ON;
> +
> + return ret;
> +}
> +
> +static int max77693_int_flag_get(struct max77693_led_device *led,
> + unsigned int *v)
> +{
> + struct regmap *rmap = led->regmap;
> +
> + return regmap_read(rmap, MAX77693_LED_REG_FLASH_INT, v);
> +}
> +
> +static int max77693_setup(struct max77693_led_device *led)
> +{
> + struct max77693_led_config_data *cfg = led->cfg_data;
> + struct regmap *rmap = led->regmap;
> + int i, first_led, last_led, ret;
> + u32 max_flash_curr[2];
> + u8 v;
> +
> + /*
> + * Initialize only flash current. Torch current doesn't
> + * require initialization as ITORCH register is written with
> + * new value each time brightness_set op is called.
> + */
> + if (led->iout_joint) {
> + first_led = FLED1;
> + last_led = FLED1;
> + max_flash_curr[FLED1] = cfg->iout_flash[FLED1] +
> + cfg->iout_flash[FLED2];
> + } else {
> + first_led = max77693_fled_used(led, FLED1) ? FLED1 : FLED2;
> + last_led = led->cfg_data->num_leds == 2 ? FLED2 : first_led;
> + max_flash_curr[FLED1] = cfg->iout_flash[FLED1];
> + max_flash_curr[FLED2] = cfg->iout_flash[FLED2];
> + }
> +
> + for (i = first_led; i <= last_led; ++i) {
> + ret = max77693_set_flash_current(led, i,
> + max_flash_curr[i]);
> + if (ret < 0)
> + return ret;
> + }
> +
> + v = TORCH_TMR_NO_TIMER | MAX77693_LED_TRIG_TYPE_LEVEL;
> + ret = regmap_write(rmap, MAX77693_LED_REG_ITORCHTIMER, v);
> + if (ret < 0)
> + return ret;
> +
> + /* initially set FLED1 timeout */
> + ret = max77693_set_timeout(led, cfg->flash_timeout[FLED1]);
> + if (ret < 0)
> + return ret;
> +
> + if (cfg->low_vsys > 0)
> + v = max77693_led_vsys_to_reg(cfg->low_vsys) |
> + MAX_FLASH1_MAX_FL_EN;
> + else
> + v = 0;
> +
> + ret = regmap_write(rmap, MAX77693_LED_REG_MAX_FLASH1, v);
> + if (ret < 0)
> + return ret;
> + ret = regmap_write(rmap, MAX77693_LED_REG_MAX_FLASH2, 0);
> + if (ret < 0)
> + return ret;
> +
> + if (cfg->boost_mode == MAX77693_LED_BOOST_FIXED)
> + v = FLASH_BOOST_FIXED;
> + else
> + v = cfg->boost_mode | cfg->boost_mode << 1;
> +
> + if (max77693_fled_used(led, FLED1) && max77693_fled_used(led, FLED2))
> + v |= FLASH_BOOST_LEDNUM_2;
> +
> + ret = regmap_write(rmap, MAX77693_LED_REG_VOUT_CNTL, v);
> + if (ret < 0)
> + return ret;
> +
> + v = max77693_led_vout_to_reg(cfg->boost_vout);
> + ret = regmap_write(rmap, MAX77693_LED_REG_VOUT_FLASH1, v);
> + if (ret < 0)
> + return ret;
> +
> + /* Allow all modes on both fled outputs */
> + led->allowed_modes = MODE_FLASH_MASK | MODE_TORCH_MASK;
> +
> + return max77693_set_mode(led, MODE_OFF);
> +}
> +
> +static int __max77693_led_brightness_set(struct max77693_led_device *led,
> + int fled_id, enum led_brightness value)
> +{
> + int ret;
> +
> + mutex_lock(&led->lock);
> +
> + if (value == 0) {
> + ret = max77693_clear_mode(led, MODE_TORCH(fled_id));
> + if (ret < 0)
> + dev_dbg(&led->pdev->dev,
> + "Failed to clear torch mode (%d)\n",
> + ret);
> + goto unlock;
> + }
> +
> + ret = max77693_set_torch_current(led, fled_id, value * TORCH_IOUT_STEP);
> + if (ret < 0) {
> + dev_dbg(&led->pdev->dev,
> + "Failed to set torch current (%d)\n",
> + ret);
> + goto unlock;
> + }
> +
> + ret = max77693_add_mode(led, MODE_TORCH(fled_id));
> + if (ret < 0)
> + dev_dbg(&led->pdev->dev,
> + "Failed to set torch mode (%d)\n",
> + ret);
> +unlock:
> + mutex_unlock(&led->lock);
> + return ret;
> +}
> +
> +static void max77693_led_brightness_set_work(
> + struct work_struct *work)
> +{
> + struct max77693_sub_led *sub_led =
> + container_of(work, struct max77693_sub_led,
> + work_brightness_set);
> + struct max77693_led_device *led = sub_led_to_led(sub_led);
> +
> + __max77693_led_brightness_set(led, sub_led->fled_id,
> + sub_led->torch_brightness);
> +}
> +
> +/* LED subsystem callbacks */
> +
> +static int max77693_led_brightness_set_sync(
> + struct led_classdev *led_cdev,
> + enum led_brightness value)
> +{
> + struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
> + struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
> + struct max77693_led_device *led = sub_led_to_led(sub_led);
> +
> + return __max77693_led_brightness_set(led, sub_led->fled_id, value);
> +}
> +
> +static void max77693_led_brightness_set(
> + struct led_classdev *led_cdev,
> + enum led_brightness value)
> +{
> + struct led_classdev_flash *fled_cdev = lcdev_to_flcdev(led_cdev);
> + struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
> +
> + sub_led->torch_brightness = value;
> + schedule_work(&sub_led->work_brightness_set);
> +}
> +
> +static int max77693_led_flash_brightness_set(
> + struct led_classdev_flash *fled_cdev,
> + u32 brightness)
> +{
> + struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
> + struct max77693_led_device *led = sub_led_to_led(sub_led);
> + int ret;
> +
> + mutex_lock(&led->lock);
> + ret = max77693_set_flash_current(led, sub_led->fled_id, brightness);
> + mutex_unlock(&led->lock);
> +
> + return ret;
> +}
> +
> +static int max77693_led_flash_strobe_set(
> + struct led_classdev_flash *fled_cdev,
> + bool state)
> +{
> + struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
> + struct max77693_led_device *led = sub_led_to_led(sub_led);
> + int fled_id = sub_led->fled_id;
> + int ret;
> +
> + mutex_lock(&led->lock);
> +
> + if (!state) {
> + ret = max77693_clear_mode(led, MODE_FLASH(fled_id));
> + goto unlock;
> + }
> +
> + if (sub_led->flash_timeout != led->current_flash_timeout) {
> + ret = max77693_set_timeout(led, sub_led->flash_timeout);
> + if (ret < 0)
> + goto unlock;
> + }
> +
> + led->strobing_sub_led_id = fled_id;
> +
> + ret = max77693_add_mode(led, MODE_FLASH(fled_id));
> +
> +unlock:
> + mutex_unlock(&led->lock);
> + return ret;
> +}
> +
> +static int max77693_led_flash_fault_get(
> + struct led_classdev_flash *fled_cdev,
> + u32 *fault)
> +{
> + struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
> + struct max77693_led_device *led = sub_led_to_led(sub_led);
> + unsigned int v;
> + int ret;
> +
> + ret = max77693_int_flag_get(led, &v);
> + if (ret < 0)
> + return ret;
> +
> + *fault = 0;
> +
> + if (v & ((sub_led->fled_id == FLED1) ? FLASH_INT_FLED1_OPEN :
> + FLASH_INT_FLED2_OPEN))
> + *fault |= LED_FAULT_OVER_VOLTAGE;
> + if (v & ((sub_led->fled_id == FLED1) ? FLASH_INT_FLED1_SHORT :
> + FLASH_INT_FLED2_SHORT))
> + *fault |= LED_FAULT_SHORT_CIRCUIT;
> + if (v & FLASH_INT_OVER_CURRENT)
> + *fault |= LED_FAULT_OVER_CURRENT;
> +
> + return 0;
> +}
> +
> +static int max77693_led_flash_strobe_get(
> + struct led_classdev_flash *fled_cdev,
> + bool *state)
> +{
> + struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
> + struct max77693_led_device *led = sub_led_to_led(sub_led);
> + int ret;
> +
> + if (!state)
> + return -EINVAL;
> +
> + mutex_lock(&led->lock);
> +
> + ret = max77693_strobe_status_get(led, state);
> +
> + *state = !!(*state && (led->strobing_sub_led_id == sub_led->fled_id));
> +
> +
> + mutex_unlock(&led->lock);
> +
> + return ret;
> +}
> +
> +static int max77693_led_flash_timeout_set(
> + struct led_classdev_flash *fled_cdev,
> + u32 timeout)
> +{
> + struct max77693_sub_led *sub_led = flcdev_to_sub_led(fled_cdev);
> + struct max77693_led_device *led = sub_led_to_led(sub_led);
> +
> + mutex_lock(&led->lock);
> + sub_led->flash_timeout = timeout;
> + mutex_unlock(&led->lock);
> +
> + return 0;
> +}
> +
> +static int max77693_led_parse_dt(struct max77693_led_device *led,
> + struct device_node *node)
> +{
> + struct max77693_led_config_data *cfg = led->cfg_data;
> + struct max77693_sub_led *sub_leds = led->sub_leds;
> + struct device *dev = &led->pdev->dev;
> + struct device_node *child_node;
> + u32 led_sources[2];
> + int fled_id, ret;
> +
> + of_property_read_u32(node, "maxim,trigger-type", &cfg->trigger_type);
> + of_property_read_u32(node, "maxim,boost-mode", &cfg->boost_mode);
> + of_property_read_u32(node, "maxim,boost-vout", &cfg->boost_vout);
> + of_property_read_u32(node, "maxim,vsys-min", &cfg->low_vsys);
> +
> + for_each_available_child_of_node(node, child_node) {
> + ret = of_property_read_u32_array(child_node, "led-sources",
> + led_sources, 2);
> + if (ret < 0) {
> + dev_err(dev,
> + "Error reading \"led-sources\" DT property\n");
> + return ret;
> + }
> +
> + if (led_sources[0] && led_sources[1]) {
> + fled_id = FLED1;
> + led->fled_mask = FLED1_IOUT | FLED2_IOUT;
> + } else if (led_sources[0] && !led_sources[1]) {
> + fled_id = FLED1;
> + led->fled_mask |= FLED1_IOUT;
> + } else if (!led_sources[0] && led_sources[1]) {
> + fled_id = FLED2;
> + led->fled_mask |= FLED2_IOUT;
> + } else {
> + dev_err(dev,
> + "Wrong \"led-sources\" DT property value\n");
> + return -EINVAL;
> + }
> +
> + sub_leds[fled_id].fled_id = fled_id;
> +
> + ret = of_property_read_string(child_node, "label",
> + (const char **) &cfg->label[fled_id]);
> + if (ret < 0) {
> + dev_err(dev, "Error reading \"label\" DT property\n");
> + return ret;
> + }
> +
> + of_property_read_u32(child_node, "max-microamp",
> + &cfg->iout_torch[fled_id]);
> + of_property_read_u32(child_node, "flash-max-microamp",
> + &cfg->iout_flash[fled_id]);
> + of_property_read_u32(child_node, "flash-timeout-us",
> + &cfg->flash_timeout[fled_id]);
> +
> + if (++led->cfg_data->num_leds == 2 ||
> + (max77693_fled_used(led, FLED1) &&
> + max77693_fled_used(led, FLED2)))
> + break;
> + }
> +
> + return 0;
> +}
> +
> +static void clamp_align(u32 *v, u32 min, u32 max, u32 step)
> +{
> + *v = clamp_val(*v, min, max);
> + if (step > 1)
> + *v = (*v - min) / step * step + min;
> +}
> +
> +static void max77693_led_validate_configuration(struct max77693_led_device
> *led)
> +{
> + struct max77693_led_config_data *cfg = led->cfg_data;
> + int i;
> +
> + if (led->cfg_data->num_leds == 1 &&
> + max77693_fled_used(led, FLED1) && max77693_fled_used(led, FLED2))
> + led->iout_joint = true;
> +
> + cfg->boost_mode = clamp_val(cfg->boost_mode, MAX77693_LED_BOOST_NONE,
> + MAX77693_LED_BOOST_FIXED);
> +
> + /* Boost must be enabled if both current outputs are used */
> + if ((cfg->boost_mode == MAX77693_LED_BOOST_NONE) && led->iout_joint)
> + cfg->boost_mode = MAX77693_LED_BOOST_FIXED;
> +
> + /* Split max current settings to both outputs in case of joint leds */
> + if (led->iout_joint) {
> + cfg->iout_torch[FLED1] /= 2;
> + cfg->iout_torch[FLED2] = cfg->iout_torch[FLED1];
> + cfg->iout_flash[FLED1] /= 2;
> + cfg->iout_flash[FLED2] = cfg->iout_flash[FLED1];
> + }
> +
> + for (i = FLED1; i <= FLED2; ++i) {
> + if (max77693_fled_used(led, i)) {
> + clamp_align(&cfg->iout_torch[i], TORCH_IOUT_MIN,
> + TORCH_IOUT_MAX, TORCH_IOUT_STEP);
> + clamp_align(&cfg->iout_flash[i], FLASH_IOUT_MIN,
> + cfg->boost_mode ? FLASH_IOUT_MAX_2LEDS :
> + FLASH_IOUT_MAX_1LED,
> + FLASH_IOUT_STEP);
> + } else {
> + cfg->iout_torch[i] = cfg->iout_flash[i] = 0;
> + }
> + }
> +
> + for (i = 0; i < ARRAY_SIZE(cfg->flash_timeout); ++i)
> + clamp_align(&cfg->flash_timeout[i], FLASH_TIMEOUT_MIN,
> + FLASH_TIMEOUT_MAX, FLASH_TIMEOUT_STEP);
> +
> + cfg->trigger_type = clamp_val(cfg->trigger_type,
> + MAX77693_LED_TRIG_TYPE_EDGE,
> + MAX77693_LED_TRIG_TYPE_LEVEL);
> +
> + clamp_align(&cfg->boost_vout, FLASH_VOUT_MIN, FLASH_VOUT_MAX,
> + FLASH_VOUT_STEP);
> +
> + if (cfg->low_vsys)
> + clamp_align(&cfg->low_vsys, MAX_FLASH1_VSYS_MIN,
> + MAX_FLASH1_VSYS_MAX, MAX_FLASH1_VSYS_STEP);
> +}
> +
> +static int max77693_led_get_configuration(struct max77693_led_device *led)
> +{
> + struct device *dev = &led->pdev->dev;
> + int ret;
> +
> + if (!dev->of_node)
> + return -EINVAL;
> +
> + led->cfg_data = devm_kzalloc(dev, sizeof(*led->cfg_data), GFP_KERNEL);
> + if (!led->cfg_data)
> + return -ENOMEM;
> +
> + ret = max77693_led_parse_dt(led, dev->of_node);
> + if (ret < 0)
> + return ret;
> +
> + max77693_led_validate_configuration(led);
> +
> + return 0;
> +}
> +
> +static const struct led_flash_ops flash_ops = {
> + .flash_brightness_set = max77693_led_flash_brightness_set,
> + .strobe_set = max77693_led_flash_strobe_set,
> + .strobe_get = max77693_led_flash_strobe_get,
> + .timeout_set = max77693_led_flash_timeout_set,
> + .fault_get = max77693_led_flash_fault_get,
> +};
> +
> +static void max77693_init_flash_settings(struct max77693_led_device *led,
> + struct max77693_led_settings *s,
> + int fled_id)
> +{
> + struct max77693_led_config_data *cfg = led->cfg_data;
> + struct led_flash_setting *setting;
> +
> + /* Init torch intensity setting */
> + setting = &s->torch_brightness;
> + setting->min = TORCH_IOUT_MIN;
> + setting->max = cfg->iout_torch[fled_id];
> + setting->max = led->iout_joint ?
> + cfg->iout_torch[FLED1] + cfg->iout_torch[FLED2] :
> + cfg->iout_torch[fled_id];
> + setting->step = TORCH_IOUT_STEP;
> + setting->val = setting->max;
> +
> + /* Init flash intensity setting */
> + setting = &s->flash_brightness;
> + setting->min = FLASH_IOUT_MIN;
> + setting->max = led->iout_joint ?
> + cfg->iout_flash[FLED1] + cfg->iout_flash[FLED2] :
> + cfg->iout_flash[fled_id];
> + setting->step = FLASH_IOUT_STEP;
> + setting->val = setting->max;
> +
> + /* Init flash timeout setting */
> + setting = &s->flash_timeout;
> + setting->min = FLASH_TIMEOUT_MIN;
> + setting->max = cfg->flash_timeout[fled_id];
> + setting->step = FLASH_TIMEOUT_STEP;
> + setting->val = setting->max;
> +}
> +
> +static int max77693_set_available_sync_led(struct max77693_led_device *led,
> + int fled_id)
> +{
> + struct max77693_sub_led *sub_led = &led->sub_leds[fled_id];
> + struct led_classdev_flash *fled_cdev = &sub_led->fled_cdev;
> +
> + fled_cdev->sync_leds = devm_kzalloc(&led->pdev->dev, sizeof(fled_cdev),
> + GFP_KERNEL);
> + if (!fled_cdev->sync_leds)
> + return -ENOMEM;
> +
> + fled_cdev->sync_leds[0] = &led->sub_leds[!fled_id].fled_cdev;
> + fled_cdev->num_sync_leds = 1;
> +
> + return 0;
> +}
> +
> +static void max77693_init_fled_cdev(struct max77693_led_device *led,
> + int fled_id)
> +{
> + struct led_classdev_flash *fled_cdev;
> + struct led_classdev *led_cdev;
> + struct max77693_sub_led *sub_led = &led->sub_leds[fled_id];
> + struct max77693_led_settings settings;
> +
> + /* Initialize flash settings */
> + max77693_init_flash_settings(led, &settings, fled_id);
> +
> + /* Initialize LED Flash class device */
> + fled_cdev = &sub_led->fled_cdev;
> + fled_cdev->ops = &flash_ops;
> + led_cdev = &fled_cdev->led_cdev;
> + led_cdev->name = led->cfg_data->label[fled_id];
> + led_cdev->brightness_set = max77693_led_brightness_set;
> + led_cdev->brightness_set_sync = max77693_led_brightness_set_sync;
> + INIT_WORK(&sub_led->work_brightness_set,
> + max77693_led_brightness_set_work);
> +
> + led_cdev->max_brightness = settings.torch_brightness.val /
> + TORCH_IOUT_STEP;
> + led_cdev->flags |= LED_DEV_CAP_FLASH;
> + if (led->cfg_data->num_leds == 2)
> + led_cdev->flags |= LED_DEV_CAP_SYNC_STROBE;
> +
> + fled_cdev->brightness = settings.flash_brightness;
> + fled_cdev->timeout = settings.flash_timeout;
> + sub_led->flash_timeout = fled_cdev->timeout.val;
> +}
> +
> +static int max77693_led_probe(struct platform_device *pdev)
> +{
> + struct device *dev = &pdev->dev;
> + struct max77693_dev *iodev = dev_get_drvdata(dev->parent);
> + struct max77693_led_device *led;
> + struct max77693_sub_led *sub_leds;
> + int init_fled_cdev[2], i, ret;
> +
> + led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
> + if (!led)
> + return -ENOMEM;
> +
> + led->pdev = pdev;
> + led->regmap = iodev->regmap;
> + sub_leds = led->sub_leds;
> +
> + platform_set_drvdata(pdev, led);
> + ret = max77693_led_get_configuration(led);
> + if (ret < 0)
> + return ret;
> +
> + ret = max77693_setup(led);
> + if (ret < 0)
> + return ret;
> +
> + init_fled_cdev[FLED1] =
> + led->iout_joint || max77693_fled_used(led, FLED1);
> + init_fled_cdev[FLED2] =
> + !led->iout_joint && max77693_fled_used(led, FLED2);
> +
> + /* Initialize LED Flash class device(s) */
> + for (i = FLED1; i <= FLED2; ++i)
> + if (init_fled_cdev[i])
> + max77693_init_fled_cdev(led, i);
> +
> + /* Setup sub-leds available for flash strobe synchronization */
> + if (led->cfg_data->num_leds == 2) {
> + for (i = FLED1; i <= FLED2; ++i) {
> + ret = max77693_set_available_sync_led(led, i);
> + if (ret < 0)
> + return ret;
> + }
> + }
> +
> + mutex_init(&led->lock);
> +
> + /* Register LED Flash class device(s) */
> + for (i = FLED1; i <= FLED2; ++i) {
> + if (init_fled_cdev[i]) {
if (!...)
continue;
The rest of the loop would look nicer this way I think. Up to you.
> + ret = led_classdev_flash_register(dev,
> + &sub_leds[i].fled_cdev);
> + if (ret < 0) {
> + /*
> + * At this moment FLED1 might have been already
> + * registered and it needs to be released.
> + */
> + if (i == FLED2)
> + goto err_register_led2;
> + else
> + goto err_register_led1;
> + }
> + }
> + }
> +
> +
> + return 0;
> +
> +err_register_led2:
> + /* It is possible than only FLED2 was to be registered */
> + if (!init_fled_cdev[FLED1])
> + goto err_register_led1;
> + led_classdev_flash_unregister(&sub_leds[FLED1].fled_cdev);
> +err_register_led1:
> + mutex_destroy(&led->lock);
> +
> + return ret;
> +}
> +
> +static int max77693_led_remove(struct platform_device *pdev)
> +{
> + struct max77693_led_device *led = platform_get_drvdata(pdev);
> + struct max77693_sub_led *sub_leds = led->sub_leds;
> +
> + if (led->iout_joint || max77693_fled_used(led, FLED1)) {
> + led_classdev_flash_unregister(&sub_leds[FLED1].fled_cdev);
> + cancel_work_sync(&sub_leds[FLED1].work_brightness_set);
> + }
> +
> + if (!led->iout_joint && max77693_fled_used(led, FLED2)) {
> + led_classdev_flash_unregister(&sub_leds[FLED2].fled_cdev);
> + cancel_work_sync(&sub_leds[FLED2].work_brightness_set);
> + }
> +
> + mutex_destroy(&led->lock);
> +
> + return 0;
> +}
> +
> +static struct of_device_id max77693_led_dt_match[] = {
> + {.compatible = "maxim,max77693-led"},
> + {},
> +};
> +
> +static struct platform_driver max77693_led_driver = {
> + .probe = max77693_led_probe,
> + .remove = max77693_led_remove,
> + .driver = {
> + .name = "max77693-led",
> + .owner = THIS_MODULE,
> + .of_match_table = max77693_led_dt_match,
> + },
> +};
> +
> +module_platform_driver(max77693_led_driver);
> +
> +MODULE_AUTHOR("Jacek Anaszewski <j.anaszew...@samsung.com>");
> +MODULE_AUTHOR("Andrzej Hajda <a.ha...@samsung.com>");
> +MODULE_DESCRIPTION("Maxim MAX77693 led flash driver");
> +MODULE_LICENSE("GPL v2");
--
Kind regards,
Sakari Ailus
e-mail: sakari.ai...@iki.fi XMPP: sai...@retiisi.org.uk
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
