Hi Hans, On Friday 14 August 2015 14:15:58 Hans Verkuil wrote: > On 08/06/2015 10:26 PM, Helen Fornazier wrote: > > Initialize the test pattern generator on the sensor > > Generate a colored bar image instead of a grey one > > You don't want to put the tpg in every sensor and have all the blocks in > between process the video. This is all virtual, so all that is necessary > is to put the tpg in every DMA engine (video node) but have the subdevs > modify the tpg setting when you start the pipeline. > > So the source would set the width/height to the sensor resolution, and it > will initialize the crop/compose rectangles. Every other entity in the > pipeline will continue modifying according to what they do. E.g. a scaler > will just change the compose rectangle. > > When you start streaming the tpg will generate the image based on all those > settings as if all the entities would actually do the work. > > Of course, this assumes the processing the entities do map to what the tpg > can do, but that's true for vimc.
There will be small differences, as generating a YUV image won't be exactly the same as debayering a bayer image. It probably doesn't matter much though. A bigger problem is that the driver aims at supporting output video device nodes at some point in mem-to-mem pipelines. For that the debayer, color space conversion and scaler subdevs need to perform real image processing. > An additional advantage is that the entities can use a wide range of > mediabus formats since the tpg can generate basically anything. Implementing > multiplanar is similarly easy. This would be much harder if you had to > write the image processing code for the entities since you'd either have to > support lots of different formats (impractical) or limit yourself to just a > few. -- Regards, Laurent Pinchart -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
