-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Dear all,
I am currently figuring out how to get the Terratec Cinergy S2 USB Box
up and running. I already modified a patch to previous version (see
attachment) to include the new ID in the device driver, module is also
loading with the ds3000 firmware. However, when using w_scan, the
reported frequency range is .95GHz ... 2.15Ghz which is roughly a
factor of 10 lower than I expected (Astra is 12.515Ghz e.g.). Since
the tuner seems to tune in correctly but in the wrong frequency range,
I feel that is the reason for me not getting in any channels.
Can you help me with what to change in the driver to get this working
? I feel like an additional .frequency_div should do the job, however
I am unable to find further informaion on that...
Best
Maximilian Imgrund
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iF4EAREIAAYFAlXkOFIACgkQR/X5cR0fI/6sfAD+OVauTyLw0oWSMr8ONzmrguF+
Ci/vg4uO9mxZwzjgGXkA/ipgQ/IuX+8n2CSScHg6CFjt9tIBbFOAVzStuUrOpwx2
=AAXS
-----END PGP SIGNATURE-----
--- a/drivers/media/usb/dvb-usb/dw2102.c
+++ b/drivers/media/usb/dvb-usb/dw2102.c
@@ -1657,6 +1657,7 @@
GOTVIEW_SAT_HD,
GENIATECH_T220,
TECHNOTREND_S2_4600,
+ TERRATEC_CINERGY_S2_R3,
};
static struct usb_device_id dw2102_table[] = {
@@ -1682,6 +1683,7 @@
[GENIATECH_T220] = {USB_DEVICE(0x1f4d, 0xD220)},
[TECHNOTREND_S2_4600] = {USB_DEVICE(USB_VID_TECHNOTREND,
USB_PID_TECHNOTREND_CONNECT_S2_4600)},
+ [TERRATEC_CINERGY_S2_R3] = {USB_DEVICE(USB_VID_TERRATEC, 0x0105)},
{ }
};
@@ -2085,7 +2087,7 @@
}},
}
},
- .num_device_descs = 5,
+ .num_device_descs = 6,
.devices = {
{ "SU3000HD DVB-S USB2.0",
{ &dw2102_table[GENIATECH_SU3000], NULL },
@@ -2107,6 +2109,10 @@
{ &dw2102_table[GOTVIEW_SAT_HD], NULL },
{ NULL },
},
+ { "Terratec Cinergy S2 USB HD Rev.3",
+ { &dw2102_table[TERRATEC_CINERGY_S2_R3], NULL },
+ { NULL },
+ },
}
};
