Hi Niklas,
Some quick review comments...
On 04/02/2016 10:52 AM, Niklas Söderlund wrote:
A V4L2 driver for Renesas R-Car VIN driver that do not depend on
soc_camera. The driver is heavily based on its predecessor and aims to
replace it.
Signed-off-by: Niklas Söderlund <niklas.soderlund+rene...@ragnatech.se>
---
The driver is tested on Koelsch and can do streaming using qv4l2 and
grab frames using yavta. It passes a v4l2-compliance (git master) run
without any failures, see bellow for output. Some issues I know about
but will have to wait for future work in other patches.
- One can not bind/unbind the subdevice and continue using the driver.
- Do not support FIELD_ALTERNATE.
- Suggested compat string "renesas,rcar-gen2-vin" is not included. Will
address this in a separate patch together with gen3.
The goal is to replace the soc_camera driver completely to prepare for
Gen3 enablement. I have therefor chosen to inherit the
CONFIG_VIDEO_RCAR_VIN name for this new driver and renamed the
soc_camera driver CONFIG_VIDEO_RCAR_VIN_OLD.
* Changes since v2
- Fix review comments from Hans Verkuil, thanks!
- Update description in Kconfig
- Drop V4L2_SEL_TGT_COMPOSE_PADDED
- Wrong size for NV16 image
- Copy ycbcr_enc and xfer_func when keeping old format.
- Add vidioc_cropcap
- Return -ENOBUFS in start_streaming to signal more buffers are
needed instead of sleeping in a critical section...
- Move all v4l2 ioctls and file ops to rcar-v4l2.c (and as a follow
up moved all HW functions to rcar-dma.c to increase readability).
- Fixed RGB formats 's/V4L2_PIX_FMT_RGB555X/V4L2_PIX_FMT_XRGB555' and
's/V4L2_PIX_FMT_RGB32/V4L2_PIX_FMT_XBGR32'. This was an error carried
over from soc-camera dirver, whit this fix I get correct colors in
qv4l2.
- Rework how media bus type and flags are handled. Instead of defining
own values and a unsigned int use struct v4l2_mbus_config to store the
configuration parsed from DT.
- Remove duplicated code from the v4l2_file_operations release code
path. There is no need to try and stop the streaming from here. If
start_streaming have been called stop_streaming will be called by the
framework stopping the streaming.
- Remove all special checks for the chip RCAR_E1. There are no compat
string that will select this chip model. Neither for this driver or
its predecessor in soc-camera.
- Force an width alignment of 32 if the NV16 format is used due to HW
limitation.
* Changes since RFC/PATCH
- Fixed review comments from Hans Verkuil, thanks for reviewing.
- Added vidioc_[gs]_selection crop and composition is supported. Thanks
Laurent for taking the time and explaining to me how to do
composition.
- Reworked the DMA flow to better support single and continues frame
grabbing mode.
- Dropped a lot of the formats that was ported from soc_camera, once I
looked at it in a working driver it was obvious that the rcar_vin
soc_camera driver did not support them.
- Added better comments for the core structs
- Fixed copyright in file headers
- A lot more testing.
I have made a few small additions to the adv7180.c driver while doing
this driver but are posted in a separate patch. For completeness I
included the output of v4l2-compliance both with and with out the
adv7180 enhancements. The adv7180 additions enables the std and tvnorms
code paths so it tests a bit more of this driver.
There is a failure reported here but it's a false positive and is
addressed in Hans Verkuil series '[PATCHv2 0/2] v4l2-ioctl: cropcap
improvement'. If I apply that series to my tree the failure goes away.
<snip>
diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c
b/drivers/media/platform/rcar-vin/rcar-dma.c
new file mode 100644
index 0000000..85a1be7
--- /dev/null
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
<snip>
+static bool rvin_fill_hw(struct rvin_dev *vin)
+{
+ int slot, limit;
+
+ limit = vin->continuous ? HW_BUFFER_NUM : 1;
+
+ for (slot = 0; slot < limit; slot++)
+ if (!rvin_fill_hw_slot(vin, slot))
+ return false;
+ return true;
+}
+
+static irqreturn_t rvin_irq(int irq, void *data)
+{
+ struct rvin_dev *vin = data;
+ u32 int_status;
+ int slot;
+ unsigned int sequence, handled = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&vin->qlock, flags);
+
+ int_status = rvin_get_interrupt_status(vin);
+ if (!int_status)
+ goto done;
+
+ rvin_ack_interrupt(vin);
+ handled = 1;
+
+ /* Nothing to do if capture status is 'STOPPED' */
+ if (vin->state == STOPPED) {
+ vin_dbg(vin, "IRQ state stopped\n");
+ goto done;
+ }
+
+ /* Wait for HW to shutdown */
+ if (vin->state == STOPPING) {
+ if (!rvin_capture_active(vin)) {
+ vin_dbg(vin, "IRQ hw stopped and we are stopping\n");
+ complete(&vin->capture_stop);
+ }
+ goto done;
+ }
+
+ /* Prepare for capture and update state */
+ slot = rvin_get_active_slot(vin);
+ sequence = vin->sequence++;
+
+ vin_dbg(vin, "IRQ %02d: %d\tbuf0: %c buf1: %c buf2: %c\tmore: %d\n",
+ sequence, slot,
+ slot == 0 ? 'x' : vin->queue_buf[0] != NULL ? '1' : '0',
+ slot == 1 ? 'x' : vin->queue_buf[1] != NULL ? '1' : '0',
+ slot == 2 ? 'x' : vin->queue_buf[2] != NULL ? '1' : '0',
+ !list_empty(&vin->buf_list));
+
+ /* HW have written to a slot that is not prepared we are in trouble */
+ if (WARN_ON((vin->queue_buf[slot] == NULL)))
+ goto done;
+
+ /* Capture frame */
+ vin->queue_buf[slot]->field = vin->format.field;
+ vin->queue_buf[slot]->sequence = sequence;
+ vin->queue_buf[slot]->vb2_buf.timestamp = ktime_get_ns();
+ vb2_buffer_done(&vin->queue_buf[slot]->vb2_buf, VB2_BUF_STATE_DONE);
+ vin->queue_buf[slot] = NULL;
+
+ /* Prepare for next frame */
+ if (!rvin_fill_hw(vin)) {
+
+ /*
+ * Can't supply HW with new buffers fast enough. Halt
+ * capture until more buffers are available.
+ */
+ vin->state = STALLED;
+
+ /*
+ * The continuous capturing requires an explicit stop
+ * operation when there is no buffer to be set into
+ * the VnMBm registers.
+ */
+ if (vin->continuous) {
+ rvin_capture_off(vin);
+ vin_dbg(vin, "IRQ %02d: hw not ready stop\n", sequence);
+ }
+ } else {
+ /*
+ * The single capturing requires an explicit capture
+ * operation to fetch the next frame.
+ */
+ if (!vin->continuous)
+ rvin_capture_on(vin);
+ }
+done:
+ spin_unlock_irqrestore(&vin->qlock, flags);
+
+ return IRQ_RETVAL(handled);
+}
+
+/* Need to hold qlock before calling */
+static void return_all_buffers(struct rvin_dev *vin,
+ enum vb2_buffer_state state)
+{
+ struct rvin_buffer *buf, *node;
+
+ list_for_each_entry_safe(buf, node, &vin->buf_list, list) {
+ vb2_buffer_done(&buf->vb.vb2_buf, state);
+ list_del(&buf->list);
+ }
+}
+
+static int rvin_queue_setup(struct vb2_queue *vq, unsigned int *nbuffers,
+ unsigned int *nplanes, unsigned int sizes[],
+ void *alloc_ctxs[])
+
+{
+ struct rvin_dev *vin = vb2_get_drv_priv(vq);
+
+ alloc_ctxs[0] = vin->alloc_ctx;
+ /* Make sure the image size is large enough. */
+ if (*nplanes)
+ return sizes[0] < vin->format.sizeimage ? -EINVAL : 0;
+
+ *nplanes = 1;
+ sizes[0] = vin->format.sizeimage;
+
+ return 0;
+};
+
+static int rvin_buffer_prepare(struct vb2_buffer *vb)
+{
+ struct rvin_dev *vin = vb2_get_drv_priv(vb->vb2_queue);
+ unsigned long size = vin->format.sizeimage;
+
+ if (vb2_plane_size(vb, 0) < size) {
+ vin_err(vin, "buffer too small (%lu < %lu)\n",
+ vb2_plane_size(vb, 0), size);
+ return -EINVAL;
+ }
+
+ vb2_set_plane_payload(vb, 0, size);
+
+ return 0;
+}
+
+static void rvin_buffer_queue(struct vb2_buffer *vb)
+{
+ struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+ struct rvin_dev *vin = vb2_get_drv_priv(vb->vb2_queue);
+ unsigned long flags;
+
+ spin_lock_irqsave(&vin->qlock, flags);
+
+ list_add_tail(to_buf_list(vbuf), &vin->buf_list);
+
+ /*
+ * If capture is stalled add buffer to HW and restart
+ * capturing if HW is ready to continue.
+ */
+ if (vin->state == STALLED)
+ if (rvin_fill_hw(vin))
+ rvin_capture_on(vin);
+
+ spin_unlock_irqrestore(&vin->qlock, flags);
+}
+
+static int rvin_start_streaming(struct vb2_queue *vq, unsigned int count)
+{
+ struct rvin_dev *vin = vb2_get_drv_priv(vq);
+ struct v4l2_subdev *sd;
+ unsigned long flags;
+ int ret;
+
+ sd = vin_to_sd(vin);
+ v4l2_subdev_call(sd, video, s_stream, 1);
+
+ spin_lock_irqsave(&vin->qlock, flags);
+
+ vin->state = RUNNING;
+ vin->sequence = 0;
+ init_completion(&vin->capture_stop);
+
+ /* Continuous capture requires more buffers then there is HW slots */
+ vin->continuous = count > HW_BUFFER_NUM;
+
+ /*
+ * Wait for more buffers if HW is not ready to start capturing. By
+ * returning -ENOBUFS the vb2 framework will call start_streaming
+ * again once one more buffer is queued.
+ */
+ if (!rvin_fill_hw(vin)) {
+ vin_dbg(vin, "HW not ready to start, wait for more buffers\n");
+ ret = -ENOBUFS;
Normally setting the min_buffers_needed field is enough to ensure this (i.e.
start_streaming
won't be called until 'min_buffers_needed' buffers have been queued).
So why isn't that enough in this case? This should probably be in a comment
here, since
it is not obvious (at least not to me).
I am not actually sure returning ENOBUFS works at all. Looking at the
vb2_core_qbuf()
code I see that it does seem to queue the buffer, but if start_streaming
returns an
error it will pass that on, so VIDIOC_QBUF returns an error, but it still
queued the buffer,
which is unexpected from a userspace perspective. I wonder if this isn't a vb2
bug.
I do know that userspace wouldn't know what to do with a -ENOBUFS error.
If support for -ENOBUFS is needed, then some vb2 work would be needed to make
this
work (vb2_core_qbuf should check for -ENOBUFS and just return 0 to userspace in
that
case).
+ goto out;
+ }
+
+ ret = rvin_capture_start(vin);
+out:
+ spin_unlock_irqrestore(&vin->qlock, flags);
+
If case of failure start_streaming should return all buffers with state
VB2_BUF_STATE_QUEUED to ensure proper operation.
+ return ret;
+}
<snip>
+static int __rvin_dma_try_format(struct rvin_dev *vin,
+ u32 which,
+ struct v4l2_pix_format *pix,
+ struct rvin_sensor *sensor)
+{
+ const struct rvin_video_format *info;
+ u32 rwidth, rheight, walign;
+
+ /* Requested */
+ rwidth = pix->width;
+ rheight = pix->height;
+
+ /*
+ * Retrieve format information and select the current format if the
+ * requested format isn't supported.
+ */
+ info = rvin_format_from_pixel(pix->pixelformat);
+ if (!info) {
+ vin_dbg(vin, "Format %x not found, keeping %x\n",
+ pix->pixelformat, vin->format.pixelformat);
+ pix->pixelformat = vin->format.pixelformat;
+ pix->colorspace = vin->format.colorspace;
+ pix->field = vin->format.field;
+ pix->ycbcr_enc = vin->format.ycbcr_enc;
+ pix->xfer_func = vin->format.xfer_func;
+ pix->quantization = vin->format.quantization;
Isn't it easier to do:
pix = vin->format;
pix->width = rwidth;
pix->height = rheight;
It's more robust when new fields are added to the pix_format struct.
+ }
+
+ /* Always recalculate */
+ pix->bytesperline = 0;
+ pix->sizeimage = 0;
+
+ /* Limit to sensor capabilities */
+ __rvin_dma_try_format_sensor(vin, which, pix, sensor);
+
+ /* If sensor can't match format try if VIN can scale */
+ if (sensor->width != rwidth || sensor->height != rheight)
+ rvin_scale_try(vin, pix, rwidth, rheight);
+
+ /* HW limit width to a multiple of 32 (2^5) for NV16 else 2 (2^1) */
+ walign = vin->format.pixelformat == V4L2_PIX_FMT_NV16 ? 5 : 1;
+
+ /* Limit to VIN capabilities */
+ v4l_bound_align_image(&pix->width, 2, RVIN_MAX_WIDTH, walign,
+ &pix->height, 4, RVIN_MAX_HEIGHT, 2, 0);
+
+ switch (pix->field) {
+ case V4L2_FIELD_NONE:
+ case V4L2_FIELD_TOP:
+ case V4L2_FIELD_BOTTOM:
+ case V4L2_FIELD_INTERLACED_TB:
+ case V4L2_FIELD_INTERLACED_BT:
+ case V4L2_FIELD_INTERLACED:
+ break;
+ default:
+ pix->field = V4L2_FIELD_NONE;
+ break;
+ }
+
+ pix->bytesperline = max_t(u32, pix->bytesperline,
+ rvin_format_bytesperline(pix));
+ pix->sizeimage = max_t(u32, pix->sizeimage,
+ rvin_format_sizeimage(pix));
+
+ vin_dbg(vin, "Requested %ux%u Got %ux%u bpl: %d size: %d\n",
+ rwidth, rheight, pix->width, pix->height,
+ pix->bytesperline, pix->sizeimage);
+
+ return 0;
+}
+
+static int rvin_querycap(struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ struct rvin_dev *vin = video_drvdata(file);
+
+ strlcpy(cap->driver, KBUILD_MODNAME, sizeof(cap->driver));
+ strlcpy(cap->card, "R_Car_VIN", sizeof(cap->card));
+ snprintf(cap->bus_info, sizeof(cap->bus_info), "platform:%s",
+ dev_name(vin->dev));
+ cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
+ V4L2_CAP_READWRITE;
+ cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
+ return 0;
+}
+
+static int rvin_try_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct rvin_dev *vin = video_drvdata(file);
+ struct rvin_sensor sensor;
+
+ return __rvin_dma_try_format(vin, V4L2_SUBDEV_FORMAT_TRY, &f->fmt.pix,
+ &sensor);
+}
+
+static int rvin_s_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct rvin_dev *vin = video_drvdata(file);
+ struct rvin_sensor sensor;
+ int ret;
+
+ if (vb2_is_busy(&vin->queue))
+ return -EBUSY;
+
+ ret = __rvin_dma_try_format(vin, V4L2_SUBDEV_FORMAT_ACTIVE, &f->fmt.pix,
+ &sensor);
+ if (ret)
+ return ret;
+
+ vin->sensor.width = sensor.width;
+ vin->sensor.height = sensor.height;
+
+ vin->format = f->fmt.pix;
+
+ return 0;
+}
+
+static int rvin_g_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_format *f)
+{
+ struct rvin_dev *vin = video_drvdata(file);
+
+ f->fmt.pix = vin->format;
+
+ return 0;
+}
+
+static int rvin_enum_fmt_vid_cap(struct file *file, void *priv,
+ struct v4l2_fmtdesc *f)
+{
+ if (f->index >= ARRAY_SIZE(rvin_formats))
+ return -EINVAL;
+
+ f->pixelformat = rvin_formats[f->index].fourcc;
+
+ return 0;
+}
+
+static int rvin_g_selection(struct file *file, void *fh,
+ struct v4l2_selection *s)
+{
+ struct rvin_dev *vin = video_drvdata(file);
+
+ switch (s->target) {
+ case V4L2_SEL_TGT_CROP_BOUNDS:
+ case V4L2_SEL_TGT_CROP_DEFAULT:
+ s->r.left = s->r.top = 0;
+ s->r.width = vin->sensor.width;
+ s->r.height = vin->sensor.height;
+ break;
+ case V4L2_SEL_TGT_CROP:
+ s->r = vin->crop;
+ break;
+ case V4L2_SEL_TGT_COMPOSE_BOUNDS:
+ case V4L2_SEL_TGT_COMPOSE_DEFAULT:
+ s->r.left = s->r.top = 0;
+ s->r.width = vin->format.width;
+ s->r.height = vin->format.height;
+ break;
+ case V4L2_SEL_TGT_COMPOSE:
+ s->r = vin->compose;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void rect_set_min_size(struct v4l2_rect *r,
+ const struct v4l2_rect *min_size)
+{
+ if (r->width < min_size->width)
+ r->width = min_size->width;
+ if (r->height < min_size->height)
+ r->height = min_size->height;
+}
+
+static void rect_set_max_size(struct v4l2_rect *r,
+ const struct v4l2_rect *max_size)
+{
+ if (r->width > max_size->width)
+ r->width = max_size->width;
+ if (r->height > max_size->height)
+ r->height = max_size->height;
+}
+
+static void rect_map_inside(struct v4l2_rect *r,
+ const struct v4l2_rect *boundary)
+{
+ rect_set_max_size(r, boundary);
+
+ if (r->left < boundary->left)
+ r->left = boundary->left;
+ if (r->top < boundary->top)
+ r->top = boundary->top;
+ if (r->left + r->width > boundary->width)
+ r->left = boundary->width - r->width;
+ if (r->top + r->height > boundary->height)
+ r->top = boundary->height - r->height;
+}
I think it is time we turn this into common code. I'll post a patch for that.
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
