The TZ1090 top level register region controls the majority of the SoC's
clocking infrastructure.
Most of the complexity comes from the description of the 2 main banks of
clock muxes (TOP_CLKSWITCH, TOP_CLKSWITCH2), with 2 banks of clock gates
(TOP_CLKENAB, TOP_CLKENAB2) which roughly speaking gate the outputs of
the muxes.
Also included are a variety of deleters, dividers, and PLLs.
The only clock specific policy decisions applied (so far) are:
- The UART divider which is flagged with CLK_SET_RATE_PARENT so that
clock changes propagate up to the uart_sw mux so that the higher
frequency system clock can be used as a source rather than the main
external oscillator, in order to get a more accurate baud rate.
- The main system clock divider which is flagged with
CLK_DIVIDER_READ_ONLY to prevent the system clock being altered.
Signed-off-by: James Hogan <james.ho...@imgtec.com>
Cc: Mike Turquette <mturque...@linaro.org>
Cc: linux-metag@vger.kernel.org
---
Changes since v1 (patch 15):
- New patch.
- Convert explicit DT representation of clock infrastructure using
generic bindings to several TZ1090 specific bindings representing
groups of TZ1090 clocks.
- Add divider specific flags (policy) which were previously in divider
DT driver.
- Tweak various clock names. A couple were wrong, some had the slightly
redundant text "clk" in them, and others were output clocks so were
better named without the "_en" which the output of clock gates tend to
be called.
- Add TOP_CLKEN register which gates system clock to PDC.
- Tweak ascii art a little.
---
drivers/clk/tz1090/Makefile | 1 +
drivers/clk/tz1090/clk-tz1090-top.c | 364 ++++++++++++++++++++++++++++++++++++
2 files changed, 365 insertions(+)
create mode 100644 drivers/clk/tz1090/clk-tz1090-top.c
diff --git a/drivers/clk/tz1090/Makefile b/drivers/clk/tz1090/Makefile
index a762cdf..873a8f6 100644
--- a/drivers/clk/tz1090/Makefile
+++ b/drivers/clk/tz1090/Makefile
@@ -8,3 +8,4 @@ obj-y += clk-tz1090-mux-bank.o
obj-y += clk-tz1090-pll.o
obj-y += clk-tz1090-pdc.o
+obj-y += clk-tz1090-top.o
diff --git a/drivers/clk/tz1090/clk-tz1090-top.c
b/drivers/clk/tz1090/clk-tz1090-top.c
new file mode 100644
index 0000000..4f7316b
--- /dev/null
+++ b/drivers/clk/tz1090/clk-tz1090-top.c
@@ -0,0 +1,364 @@
+/*
+ * Copyright (C) 2013-2014 Imagination Technologies Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ *
+ * TZ1090 TOP Clocks
+ */
+
+#include <dt-bindings/clock/tz1090-top.h>
+
+#include "clk.h"
+
+/* Register offsets into top level memory region */
+#define TOP_CLKEN 0x00
+#define TOP_CLKSTATUS 0x04
+#define TOP_CLKSWITCH 0x08
+#define TOP_CLKENAB 0x0c
+#define TOP_CLKDELETE 0x10
+#define TOP_SYSCLK_DIV 0x14
+#define TOP_META_CLKDIV 0x18
+#define TOP_META_CLKDELETE 0x1c
+#define TOP_AFE_DIV 0x20
+#define TOP_ADCPLL_DIV 0x24
+#define TOP_UARTCLK_DIV 0x28
+#define TOP_PDMCK_CTL 0x30
+#define TOP_SPICLK_DIV 0x34
+#define TOP_SPI1CLK_DIV 0x38
+#define TOP_I2SCLK_DIV 0x3c
+#define TOP_USB_PLLDIV 0x40
+#define TOP_SDHOSTCLK_DIV 0x44
+#define TOP_RING_OP_DIV 0x48
+#define TOP_SYSPLL_CTL0 0x50
+#define TOP_ADCPLL_CTL0 0x58
+#define TOP_META_CLK 0x80
+#define TOP_CLKSWITCH2 0x88
+#define TOP_CLKENAB2 0x8c
+#define TOP_I2S_DIV2 0x90
+#define TOP_META_TRACE_CLK_DIV 0x94
+#define TOP_PIXEL_CLK_DIV 0x98
+#define TOP_CLKOUT0_DIV 0x9c
+#define TOP_CLKOUT1_DIV 0xa0
+#define TOP_UCC0_CLKDELETE 0xa4
+#define TOP_UCC1_CLKDELETE 0xa8
+#define TOP_DDR_CLKDIV 0xac
+
+/*
+ * CR_TOP_CLKSWITCH
+ * ================
+ * ___________ _________ _____________
+ * xtal1 ------o| sys_sw \______| sys_pll |_| sys_clk_div |__
+ * xtal2 -------|___________/ 0 |_________| |_____________| |
+ * __________________________________________________|
+ * | ___________
+ * xtal1 ----|-o|sysclk1_sw \____________________________
+ * sys_clk_div `--|___________/ 1 sys_clk_x2_undeleted
+ * xtal1 ------o|clkout0_sw0\______
+ * afe_progdiv1 -------|___________/ 2 |
+ * sys_undeleted ------o|clkout0_sw1\____ |
+ * if0_sw -------|___________/ 3 | | CR_TOP_CLKENAB
+ * ,-;==================='-' ==============
+ * | | ___________ ___________
+ * clkout0_sw0 | `-o|clkout0_sw2\____ _| out0_inv \_____
+ * xtal2 --|----|___________/ 4 | | |___________/ 4
+ * | ___________________| |__________________
+ * | | ___________ ___________ |
+ * clkout0_sw2 | `-o|clkout0_sw3\__________| out0_en \____|
+ * clkout0_sw1 `----|___________/ 5 |___________/ 5
+ * xtal1 ------o|clkout1_sw0\______ .
+ * xtal2 -------|___________/ 6 | .
+ * sys_undeleted ------o|clkout1_sw1\____ | .
+ * if1_sw -------|___________/ 7 | | .
+ * ,-;==================='-' .
+ * | | ___________ ___________
+ * adcpll_clk --|-|-o|clkout1_sw2\____ _| out1_inv \_____
+ * clkout1_sw1 `-|--|___________/ 8 | | |___________/ 8
+ * _|___________________| |__________________
+ * | | ___________ ___________ |
+ * clkout1_sw0 | `-o|clkout1_sw3\__________| out1_en \____|
+ * clkout1_sw2 `----|___________/ 9 |___________/ 9
+ * xtal1 ------o| i2s_sw2 \______ .
+ * sys_undeleted -------|___________/ 10 | .
+ * xtal2 ------o| i2s_sw0 \____ | .
+ * adcpll_clk -------|___________/ 11 | | .
+ * ,-;==================='-' .
+ * | | ___________ ___________
+ * i2s_sw2 | `-o| i2s_sw1 \__________| i2s_en \_____
+ * i2s_sw0 `----|___________/ 12 |___________/ 12
+ * xtal1 ------o| scb_sw \__________| scb_en \_____
+ * sys_undeleted -------|___________/ 13 |___________/ 13
+ * xtal1 ------o| uart_sw \__________| uart_en \_____
+ * sys_undeleted -------|___________/ 14 |___________/ 14
+ * xtal1 ------o|ext_stc0_sw\__________|ext_stc0_en\_____
+ * xtal2 -------|___________/ 16 |___________/ 16
+ * xtal1 ------o|ext_stc1_sw\__________|ext_stc1_en\_____
+ * xtal2 -------|___________/ 17 |___________/ 17
+ * adcpll_clk ------o| usb_sw0 \____ .
+ * afe_progdiv3 -------|___________/ 18 | .
+ * ___________________| .
+ * | ___________ ___________
+ * usb_sw3 ,-|-o| usb_sw1 \__________| usb_en \_____
+ * usb_sw0 | `--|___________/ 19 |___________/ 19
+ * xtal1 --|---o| afe_sw0 \________________
+ * afe_sw1 ,-|----|___________/ 20 . | _____________
+ * `-`=====================:-. . |___| afe_clk_div
|________
+ * ___________ | | . |_____________|
afe_clk
+ * adcpll_en ,---o| afe_sw1 \____| | .
+ * xtal2 --|----|___________/ 21 | . ________
+ * xtal1 --|---o|adcpll_sw0 \______|_____________| adcpll
|_____________
+ * xtal2 --|----|___________/ 22 | . |________| adcpll_clk
+ * xtal1 --|---o|adcpll_sw1 \____ | .
+ * xtal2 --|----|___________/ 23 | | .
+ * | ___________________| | .
+ * | | ___________ | . ________________
+ * adcpll_en +-|-o|adcpll_sw2 \______|_____________| adcpll_clk_div
|_____
+ * adcpll_sw1 | `--|___________/ 24 | . |________________|
+ * |_______________________|_____________________
+ * ___________ | ___________ |
+ * sys_undeleted -------|adcpll_sw3 \______|___| adcpll_en \_____|
+ * adcpll_clk -------|___________/ 25 | |___________/ 25
+ * xtal1 -------| usb_sw2 \____ |
+ * xtal2 -------|___________/ 28 | |
+ * ___________________| |
+ * | ___________ |
+ * usb_sw2 `--| usb_sw3 \______|
+ * sys_undeleted -------|___________/ 29
+ */
+MUX_BANK(tz1090_top_clkswitch, CLK_TOP_CLKSWITCH_BASE, TOP_CLKSWITCH,
+ /* bit in[0] in[1] out */
+ MUX( 0, "@xtal1", "@xtal2", "sys_sw")
+ MUX( 1, "@xtal1", "sys_div", "sys_x2_undeleted")
+ MUX( 2, "@xtal1", "@afe_progdiv1", "out0_sw0")
+ MUX( 3, "sys_undeleted", "if0_sw", "out0_sw1")
+ MUX( 4, "out0_sw0", "@xtal2", "out0_sw2")
+ MUX( 5, "out0_sw2", "out0_sw1", "out0_sw3")
+ MUX( 6, "@xtal1", "@xtal2", "out1_sw0")
+ MUX( 7, "sys_undeleted", "if1_sw", "out1_sw1")
+ MUX( 8, "adcpll", "out1_sw1", "out1_sw2")
+ MUX( 9, "out1_sw0", "out1_sw2", "out1_sw3")
+ MUX(10, "@xtal1", "sys_undeleted", "i2s_sw2")
+ MUX(11, "@xtal2", "adcpll", "i2s_sw0")
+ MUX(12, "i2s_sw2", "i2s_sw0", "i2s_sw1")
+ MUX(13, "@xtal1", "sys_undeleted", "scb_sw")
+ MUX(14, "@xtal1", "sys_undeleted", "uart_sw")
+ /* bit 15 unused */
+ MUX(16, "@xtal1", "@xtal2", "ext_stc0_sw")
+ MUX(17, "@xtal1", "@xtal2", "ext_stc1_sw")
+ MUX(18, "adcpll", "@afe_progdiv3", "usb_sw0")
+ MUX(19, "usb_sw3", "usb_sw0", "usb_sw1")
+ MUX(20, "@xtal1", "afe_sw1", "afe_sw0")
+ MUX(21, "adcpll_en", "@xtal2", "afe_sw1")
+ MUX(22, "@xtal1", "@xtal2", "adcpll_sw0")
+ MUX(23, "@xtal1", "@xtal2", "adcpll_sw1")
+ MUX(24, "adcpll_en", "adcpll_sw1", "adcpll_sw2")
+ MUX(25, "sys_undeleted", "adcpll", "adcpll_sw3")
+ /* bits 26..27 unused */
+ MUX(28, "@xtal1", "@xtal2", "usb_sw2")
+ MUX(29, "usb_sw2", "sys_undeleted", "usb_sw3")
+ /* bits 30..31 unused */
+);
+
+GATE_BANK(tz1090_top_clkenab, CLK_TOP_CLKENAB_BASE, TOP_CLKENAB,
+ /* bit in out */
+ /* bits 0..4 unused */
+ GATE( 5, "out0_sw3", "out0_en")
+ /* bits 6..8 unused */
+ GATE( 9, "out1_sw3", "out1_en")
+ /* bits 10..11 unused */
+ GATE(12, "i2s_sw1", "i2s_en")
+ GATE(13, "scb_sw", "scb")
+ GATE(14, "uart_sw", "uart_en")
+ /* bit 15 unused */
+ GATE(16, "ext_stc0_sw", "ext_stc0")
+ GATE(17, "ext_stc1_sw", "ext_stc1")
+ /* bit 18 unused */
+ GATE(19, "usb_sw1", "usb_en")
+ /* bits 20..24 unused */
+ GATE(25, "adcpll_sw3", "adcpll_en")
+ /* bits 26..31 unused */
+);
+
+/*
+ * CR_TOP_CLKSWITCH2
+ * =================
+ * ___________
+ * xtal1 ------o| pixel_sw0 \______
+ * pixel_sw3 ,----|___________/ 0 |
+ * sys_undeleted --+---o| pixel_sw1 \____ |
+ * pixel_sw4 | ,--|___________/ 1 | |
+ * `-`===================|=|=:-. CR_TOP_CLKENAB2
+ * ,-;==================='-' | | ===============
+ * | | ___________ | | __________
+ * pixel_sw0 | `-o| pixel_sw2 \________|_|___| pixel_en \_____
+ * pixel_sw1 `----|___________/ 2 | | |__________/ 2
+ * adcpll_clk ------o| pixel_sw3 \________| | .
+ * afe_progdiv3 -------|___________/ 3 | .
+ * usb_phy_clk ------o| pixel_sw4 \__________| .
+ * xtal2 -------|___________/ 4 __________
+ * iqadc_sync ------o| if1_sw \______________| if1_en \_____
+ * ext_adc_dac --+----|___________/ 5 |__________/ 5
+ * afe_rxsync --|---o| if0_sw \______________| if0_en \_____
+ * ext_adc_dac |`---|___________/ 6 _____|__________/ 6
+ * |.________________________| ext_adc_dac_en \_____
+ * | ___________ |________________/ 7
+ * afe_txsync --|---o| dac0_sw \______________| dac0_en \_____
+ * ext_adc_dac `----|___________/ 8 |__________/ 8
+ * ucc1_clk_del ------o| ucc1_sw \______________| ucc1_en \_____
+ * ucc0_clk_del --+----|___________/ 9 |__________/ 9
+ * ucc0_clk_del `---o| ucc0_sw \______________| ucc0_en \_____
+ * sys_clk -------|___________/ 10 |__________/ 10
+ */
+MUX_BANK(tz1090_top_clkswitch2, CLK_TOP_CLKSWITCH2_BASE, TOP_CLKSWITCH2,
+ /* bit in[0] in[1] out */
+ MUX( 0, "@xtal1", "pixel_sw3", "pixel_sw0")
+ MUX( 1, "sys_undeleted", "pixel_sw4", "pixel_sw1")
+ MUX( 2, "pixel_sw0", "pixel_sw1", "pixel_sw2")
+ MUX( 3, "adcpll", "@afe_progdiv3", "pixel_sw3")
+ MUX( 4, "usb_phy", "@xtal2", "pixel_sw4")
+ MUX( 5, "@iqadc_sync", "@ext_adc_dac", "if1_sw")
+ MUX( 6, "@afe_rxsync", "@ext_adc_dac", "if0_sw")
+ /* bit 7 unused */
+ MUX( 8, "@afe_txsync", "@ext_adc_dac", "dac0_sw")
+ MUX( 9, "ucc1_del", "ucc0", "ucc1_sw")
+ MUX(10, "ucc0", "sys", "ucc0_sw")
+ /* bits 11..31 unused */
+);
+
+GATE_BANK(tz1090_top_clkenab2, CLK_TOP_CLKENAB2_BASE, TOP_CLKENAB2,
+ /* bit in out */
+ /* bits 0..1 unused */
+ GATE( 2, "pixel_sw2", "pixel_en")
+ /* bits 3..4 unused */
+ GATE( 5, "if1_sw", "if1")
+ GATE( 6, "if0_sw", "if0")
+ GATE( 7, "@ext_adc_dac", "ext_adc_dac_en")
+ GATE( 8, "dac0_sw", "dac0")
+ GATE( 9, "ucc1_sw", "sys_ucc1")
+ GATE(10, "ucc0_sw", "sys_mtx")
+ /* bits 11..31 unused */
+);
+
+/*
+ * Deleters
+ * ========
+ *
+ * sys_undeleted ---[ clkdelete ]--- sys_clk
+ * sys_x2_undeleted ---[ meta_clkdelete ]--- meta_core_clk
+ * sys_undeleted ---[ clkdelete ]--- ucc0_clk_del
+ * sys_undeleted ---[ clkdelete ]--- ucc1_clk_del
+ */
+
+static const struct tz1090_clk_deleter tz1090_top_deleters[] __initconst = {
+ DEL(CLK_TOP_SYS, "sys_undeleted", "sys", TOP_CLKDELETE),
+ DEL(CLK_TOP_META, "sys_x2_undeleted", "meta",
TOP_META_CLKDELETE),
+ DEL(CLK_TOP_UCC0, "sys_undeleted", "ucc0",
TOP_UCC0_CLKDELETE),
+ DEL(CLK_TOP_UCC1_DEL, "sys_undeleted", "ucc1_del",
TOP_UCC1_CLKDELETE),
+};
+
+/*
+ * Dividers
+ * ========
+ *
+ * sys_pll ---[ sys_clk_div ]--- sys_div
+ * sys_x2_undeleted ---[ meta_clk_div ]--- sys_undeleted
+ * afe_sw0 ---[ afe_clk_div ]--- afe_clk
+ * adcpll_sw2 ---[ adcpll_clk_div ]--- adcpll_div
+ * uart_en ---[ uart_clk_div ]--- uart_clk
+ * sys_undeleted ---[ pdm_clk_div ]--- pdm_clk
+ * sys_undeleted ---[ spi0_clk_div ]--- spi0_clk
+ * sys_undeleted ---[ spi1_clk_div ]--- spi1_clk
+ * i2s_en ---[ i2sm_clk_div ]--- i2sm
+ * usb_en ---[ usbpll_clk_div ]--- usb_phy_clk
+ * sys_undeleted ---[ sdhost_clk_div ]--- sdhost_clk
+ * sys_undeleted ---[ ring_osc_clk_div ]--- ring_osc_clk
+ * i2sm_clk ---[ i2s_clk_div2 ]--- i2s_clk
+ * sys_undeleted ---[ meta_trace_clk_div ]--- meta_trace_clk
+ * pixel_en ---[ pixel_clk_div ]--- pixel_clk
+ * clkout0_en ---[ clkout0_clk_div ]--- clkout0
+ * clkout1_en ---[ clkout1_clk_div ]--- clkout1
+ * ddr_en ---[ ddr_clk_div ]--- ddr_clk
+ */
+
+static const struct tz1090_clk_divider tz1090_top_dividers[] __initconst = {
+ DIV(CLK_TOP_SYS_DIV, "sys_pll", "sys_div", TOP_SYSCLK_DIV,
8),
+ /*
+ * CLK_DIVIDER_READ_ONLY: sys_undeleted is set up by the bootloader
+ * along with sys_pll, and has a whole bunch of derivative peripheral
+ * clocks. It would be really bad for it to change on the fly.
+ */
+ DIV_FLAGS(CLK_TOP_SYS_UNDELETED, "sys_x2_undeleted", "sys_undeleted",
TOP_META_CLKDIV, 2,
+ 0, CLK_DIVIDER_READ_ONLY),
+ DIV(CLK_TOP_AFE, "afe_sw0", "afe", TOP_AFE_DIV,
8),
+ DIV(CLK_TOP_ADCPLL_DIV, "adcpll_sw2", "adcpll_div", TOP_ADCPLL_DIV,
8),
+ /*
+ * CLK_SET_RATE_PARENT: UART clock changes must propagate up to uart_sw,
+ * which muxes between XTAL1 and sys_undeleted, in order to get enough
+ * precision.
+ */
+ DIV_FLAGS(CLK_TOP_UART, "uart_en", "uart", TOP_UARTCLK_DIV,
8,
+ CLK_SET_RATE_PARENT, 0),
+ DIV(CLK_TOP_PDM, "sys_undeleted", "pdm", TOP_PDMCK_CTL,
3),
+ DIV(CLK_TOP_SPI0, "sys_undeleted", "spi0", TOP_SPICLK_DIV,
8),
+ DIV(CLK_TOP_SPI1, "sys_undeleted", "spi1", TOP_SPI1CLK_DIV,
8),
+ DIV(CLK_TOP_I2SM, "i2s_en", "i2sm", TOP_I2SCLK_DIV,
8),
+ DIV(CLK_TOP_USB_PHY, "usb_en", "usb_phy", TOP_USB_PLLDIV,
8),
+ DIV(CLK_TOP_SDHOST, "sys_undeleted", "sdhost",
TOP_SDHOSTCLK_DIV, 8),
+ DIV(CLK_TOP_RING_OSC, "sys_undeleted", "ring_osc", TOP_RING_OP_DIV,
4),
+ DIV(CLK_TOP_I2S, "i2sm", "i2s", TOP_I2S_DIV2,
8),
+ DIV(CLK_TOP_META_TRACE, "sys_undeleted", "meta_trace",
TOP_META_TRACE_CLK_DIV, 8),
+ DIV(CLK_TOP_PIXEL, "pixel_en", "pixel",
TOP_PIXEL_CLK_DIV, 8),
+ DIV(CLK_TOP_OUT0, "out0_en", "out0", TOP_CLKOUT0_DIV,
8),
+ DIV(CLK_TOP_OUT1, "out1_en", "out1", TOP_CLKOUT1_DIV,
8),
+ DIV(CLK_TOP_DDR, "@ddr_en", "ddr", TOP_DDR_CLKDIV,
8),
+};
+
+/*
+ * PLLs
+ * ====
+ *
+ * sys_sw ---[ sys_pll ]---
+ * adcpll_sw0 ---[ adcpll ]---
+ */
+
+static const struct tz1090_clk_pll tz1090_top_plls[] __initconst = {
+ PLL(CLK_TOP_SYSPLL, "sys_sw", "sys_pll", TOP_SYSPLL_CTL0),
+ PLL(CLK_TOP_ADCPLL, "adcpll_sw0", "adcpll", TOP_ADCPLL_CTL0),
+};
+
+/*
+ * CR_TOP_CLKEN
+ * ============
+ *
+ * sys ----[ pdc_sys_en ]--- 0 sys_pdc
+ */
+GATE_BANK(tz1090_top_clken, CLK_TOP_CLKEN_BASE, TOP_CLKEN,
+ /* bit in out */
+ GATE( 0, "sys", "sys_pdc")
+ /* bits 1..31 unused */
+);
+
+static void __init tz1090_top_clk_init(struct device_node *np)
+{
+ struct tz1090_clk_provider *p;
+
+ p = tz1090_clk_alloc_provider(np, CLK_TOP_MAX);
+ if (!p)
+ return;
+
+ tz1090_clk_register_mux_bank(p, &tz1090_top_clkswitch);
+ tz1090_clk_register_mux_bank(p, &tz1090_top_clkswitch2);
+ tz1090_clk_register_gate_bank(p, &tz1090_top_clkenab);
+ tz1090_clk_register_gate_bank(p, &tz1090_top_clkenab2);
+ tz1090_clk_register_gate_bank(p, &tz1090_top_clken);
+ tz1090_clk_register_deleters(p, tz1090_top_deleters,
+ ARRAY_SIZE(tz1090_top_deleters));
+ tz1090_clk_register_dividers(p, tz1090_top_dividers,
+ ARRAY_SIZE(tz1090_top_dividers));
+ tz1090_clk_register_plls(p, tz1090_top_plls,
+ ARRAY_SIZE(tz1090_top_plls));
+
+ tz1090_clk_register_provider(p);
+}
+CLK_OF_DECLARE(tz1090_top_clk, "img,tz1090-top-clocks", tz1090_top_clk_init);
--
2.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-metag" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
