The Tegra30 and up TRM states that this bit should always be
programmed to 0 by driver software.
Signed-off-by: Lucas Stach <d...@lynxeye.de>
---
drivers/mmc/host/sdhci-tegra.c | 10 +++++++++-
1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c
index f11db83..20ce81b 100644
--- a/drivers/mmc/host/sdhci-tegra.c
+++ b/drivers/mmc/host/sdhci-tegra.c
@@ -28,6 +28,10 @@
#include "sdhci-pltfm.h"
/* Tegra SDHOST controller vendor register definitions */
+#define SDHCI_TEGRA_VENDOR_CLOCK_CTRL 0x100
+#define SDHCI_CLOCK_CTRL_PADPIPE_CLKEN_OVERRIDE BIT(3)
+#define SDHCI_CLOCK_CTRL_SPI_MODE_CLKEN_OVERRIDE BIT(2)
+
#define SDHCI_TEGRA_VENDOR_MISC_CTRL 0x120
#define SDHCI_MISC_CTRL_ENABLE_SDR104 0x8
#define SDHCI_MISC_CTRL_ENABLE_SDR50 0x10
@@ -125,7 +129,7 @@ static void tegra_sdhci_reset(struct sdhci_host *host, u8
mask)
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_tegra *tegra_host = pltfm_host->priv;
const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data;
- u32 misc_ctrl;
+ u32 misc_ctrl, clk_ctrl;
sdhci_reset(host, mask);
@@ -145,6 +149,10 @@ static void tegra_sdhci_reset(struct sdhci_host *host, u8
mask)
misc_ctrl &= ~SDHCI_MISC_CTRL_ENABLE_SDR104;
sdhci_writew(host, misc_ctrl, SDHCI_TEGRA_VENDOR_MISC_CTRL);
+ clk_ctrl = sdhci_readl(host, SDHCI_TEGRA_VENDOR_CLOCK_CTRL);
+ clk_ctrl &= ~SDHCI_CLOCK_CTRL_SPI_MODE_CLKEN_OVERRIDE;
+ sdhci_writel(host, clk_ctrl, SDHCI_TEGRA_VENDOR_CLOCK_CTRL);
+
tegra_host->ddr_signaling = false;
}
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
