I see that 2.6.19 is supposed to support WPA with fullmac prism54 cards:
http://prism54.org/punbb/viewtopic.php?pid=6813
However, I can't seem to get it working. I'm running 2.6.19.1 on Gentoo
with wpa_supplicant version 0.5.6. The access point is actually
another Linux box running hostapd. It is configured to use WPA-PSK
with TKIP encryption. Here's my wpa_supplicant.conf:
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
ap_scan=1
network={
ssid="jimbo"
key_mgmt=WPA-PSK
proto=WPA
psk="xxxxxxxxxxxxx"
}
The LEDs on the card start flashing when I try to connect to the access
point, but it doesn't succeed in connecting. Here's the output I get in
/var/log/messages while it is trying to connect:
Jan 1 16:50:58 lucy eth0: resetting device...
Jan 1 16:50:58 lucy eth0: uploading firmware...
Jan 1 16:50:58 lucy eth0: firmware version: 1.0.4.3
Jan 1 16:50:58 lucy eth0: firmware upload complete
Jan 1 16:50:58 lucy eth0: interface reset complete
Jan 1 16:50:59 lucy eth0: prism54_set_txpower() auto power will be
implemented later.
Jan 1 16:50:59 lucy prism54_hostapd - len=48
Jan 1 16:50:59 lucy eth0: Caught WPA supplicant wpa init request
Jan 1 16:50:59 lucy eth0: Enabling WPA
Jan 1 16:50:59 lucy prism54_hostapd - len=48
Jan 1 16:50:59 lucy eth0: Caught WPA drop unencrypted request
Jan 1 16:50:59 lucy eth0: timeout waiting for mgmt response 100,
triggering device
Jan 1 16:51:02 lucy eth0: timeout waiting for mgmt response 100,
triggering device
Jan 1 16:51:11 lucy eth0: timeout waiting for mgmt response 100,
triggering device
Jan 1 16:51:19 lucy eth0: timeout waiting for mgmt response 100,
triggering device
Jan 1 16:51:27 lucy eth0: timeout waiting for mgmt response 100,
triggering device
Jan 1 16:51:27 lucy eth0: timeout waiting for mgmt response 90,
triggering device
Jan 1 16:51:27 lucy prism54_hostapd - len=48
Jan 1 16:51:27 lucy eth0: Caught WPA drop unencrypted request
Jan 1 16:51:27 lucy prism54_hostapd - len=48
Jan 1 16:51:27 lucy eth0: Caught WPA supplicant set WPA IE request
Jan 1 16:51:27 lucy eth0: WPA IE Attachment was set
Jan 1 16:51:40 lucy prism54_hostapd - len=48
Jan 1 16:51:40 lucy eth0: Caught WPA drop unencrypted request
Jan 1 16:51:40 lucy prism54_hostapd - len=48
Jan 1 16:51:40 lucy eth0: Caught WPA supplicant set WPA IE request
Jan 1 16:51:40 lucy eth0: WPA IE Attachment was set
Jan 1 16:51:53 lucy prism54_hostapd - len=48
Jan 1 16:51:53 lucy eth0: Caught WPA drop unencrypted request
Jan 1 16:51:53 lucy prism54_hostapd - len=48
Jan 1 16:51:53 lucy eth0: Caught WPA supplicant set WPA IE request
Jan 1 16:51:53 lucy eth0: WPA IE Attachment was set
Any ideas as to what's going wrong here? Here's what lspci thinks of my
card, if that helps:
06:00.0 Network controller: Intersil Corporation ISL3890 [Prism GT/Prism
Duette]/ISL3886 [Prism Javelin/Prism Xbow] (rev 01)
Please CC me in any responses, I'm not subscribed to this mailing list.
thanks for any help,
Jim Faulkner
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
