Hi All,
I have a system setup where i want to send ipv4 packets over
ipv6 n/w. I suppose this feature has been recently added in 2.6.22. So
iam using that kernel.
My setup:
(eth0) (eth1) (eth1) (eth0)
----| RT1 |------------| RT 2 |----
RT1 :
eth0
192.168.1.1
eth1:
3001:470:1f00:ffff::190
RT2:
eth0:
172.16.15.1
eth1:
3001:470:1f00:ffff::189
I created a tunnel using ip6_tunnel, which i believe has this support.
RT 1:
#ip -6 tunnel add mytun remote 3001:470:1f00:ffff::189 local
3001:470:1f00:ffff::190 dev eth1
#ip link set dev mytun up
#ip -6 addr add 4001:470:1f00:ffff::190 dev mytun
#route add -net 192.168.1.0/24 mytun
RT2:
#ip -6 tunnel add mytun remote 3001:470:1f00:ffff::190 local
3001:470:1f00:ffff::189 dev eth1
#ip link set dev mytun up
#ip -6 addr add 5001:470:1f00:ffff::190 dev mytun
#route add -net 172.16.15.0/24 mytun
With this i thought i can ping from 192.x.x.x to 172.x.x.x and vice
versa. But its not happening :(. Iam not sure why. When i capture
packets on the eth1 interface, i dont see packets coming out. Please help.
btw, i have enabled fwd for ipv6 and ipv4 also and flushed all ip6tables
and iptables rules just in case.
Regards,
Varun
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
