From: David Rivshin <drivs...@allworx.com>
If a fixed-link DT subnode is used, the phy_device was looked up so
that a PHY ID string could be constructed and passed to phy_connect().
This is not necessary, as the device_node can be passed directly to
of_phy_connect() instead. This reuses the same codepath as if the
phy-handle DT property was used.
Signed-off-by: David Rivshin <drivs...@allworx.com>
---
drivers/net/ethernet/ti/cpsw.c | 10 +---------
1 file changed, 1 insertion(+), 9 deletions(-)
diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index f9029e7..94b818c 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -2038,29 +2038,21 @@ static int cpsw_probe_dt(struct cpsw_platform_data
*data,
"phy-handle", 0);
parp = of_get_property(slave_node, "phy_id", &lenp);
if (slave_data->phy_node) {
dev_dbg(&pdev->dev,
"slave[%d] using phy-handle=\"%s\"\n",
i, slave_data->phy_node->full_name);
} else if (of_phy_is_fixed_link(slave_node)) {
- struct device_node *phy_node;
- struct phy_device *phy_dev;
-
/* In the case of a fixed PHY, the DT node associated
* to the PHY is the Ethernet MAC DT node.
*/
ret = of_phy_register_fixed_link(slave_node);
if (ret)
return ret;
- phy_node = of_node_get(slave_node);
- phy_dev = of_phy_find_device(phy_node);
- if (!phy_dev)
- return -ENODEV;
- snprintf(slave_data->phy_id, sizeof(slave_data->phy_id),
- PHY_ID_FMT, phy_dev->bus->id, phy_dev->addr);
+ slave_data->phy_node = of_node_get(slave_node);
} else if (parp) {
u32 phyid;
struct device_node *mdio_node;
struct platform_device *mdio;
if (lenp != (sizeof(__be32) * 2)) {
dev_err(&pdev->dev, "Invalid slave[%d] phy_id
property\n", i);
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
