This patch adds the twl4030 power handling. It downloads the scripts provided
by the board configuration to the twl4030 and configures the chip to call
the relevant script for each event (processor group 1 and 2 sleep,
processor group 3 sleep, wakeup or warm reset).
Signed-off-by: Peter 'p2' De Schrijver <[EMAIL PROTECTED]>
---
drivers/mfd/twl4030-power.c | 270 +++++++++++++++++++++++++++++++++++++++++++
1 files changed, 270 insertions(+), 0 deletions(-)
create mode 100644 drivers/mfd/twl4030-power.c
diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
new file mode 100644
index 0000000..bdeac36
--- /dev/null
+++ b/drivers/mfd/twl4030-power.c
@@ -0,0 +1,270 @@
+/*
+ * linux/drivers/i2c/chips/twl4030-power.c
+ *
+ * Handle TWL4030 Power initialization
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Copyright (C) 2006 Texas Instruments, Inc
+ *
+ * Written by Kalle Jokiniemi
+ * Peter De Schrijver <[EMAIL PROTECTED]>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/i2c/twl4030.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+
+static u8 triton_next_free_address = 0x2b;
+
+#define PWR_P1_SW_EVENTS 0x10
+#define PWR_DEVOFF (1<<0)
+
+#define PHY_TO_OFF_PM_MASTER(p) (p - 0x36)
+#define PHY_TO_OFF_PM_RECEIVER(p) (p - 0x5b)
+
+/* resource - hfclk */
+#define R_HFCLKOUT_DEV_GRP PHY_TO_OFF_PM_RECEIVER(0xe6)
+
+/* PM events */
+#define R_P1_SW_EVENTS PHY_TO_OFF_PM_MASTER(0x46)
+#define R_P2_SW_EVENTS PHY_TO_OFF_PM_MASTER(0x47)
+#define R_P3_SW_EVENTS PHY_TO_OFF_PM_MASTER(0x48)
+#define R_CFG_P1_TRANSITION PHY_TO_OFF_PM_MASTER(0x36)
+#define R_CFG_P2_TRANSITION PHY_TO_OFF_PM_MASTER(0x37)
+#define R_CFG_P3_TRANSITION PHY_TO_OFF_PM_MASTER(0x38)
+
+#define LVL_WAKEUP 0x08
+
+#define ENABLE_WARMRESET (1<<4)
+
+#define END_OF_SCRIPT 0x3f
+
+#define R_SEQ_ADD_A2S PHY_TO_OFF_PM_MASTER(0x55)
+#define R_SEQ_ADD_SA12 PHY_TO_OFF_PM_MASTER(0x56)
+#define R_SEQ_ADD_S2A3 PHY_TO_OFF_PM_MASTER(0x57)
+#define R_SEQ_ADD_WARM PHY_TO_OFF_PM_MASTER(0x58)
+#define R_MEMORY_ADDRESS PHY_TO_OFF_PM_MASTER(0x59)
+#define R_MEMORY_DATA PHY_TO_OFF_PM_MASTER(0x5a)
+
+#define R_PROTECT_KEY 0x0E
+#define KEY_1 0xC0
+#define KEY_2 0x0C
+
+static int __init twl4030_write_script_byte(u8 address, u8 byte)
+{
+ int err;
+
+ err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+ R_MEMORY_ADDRESS);
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, byte,
+ R_MEMORY_DATA);
+
+ return err;
+}
+
+static int __init twl4030_write_script_ins(u8 address, u16 pmb_message,
+ u8 delay, u8 next)
+{
+ int err = 0;
+
+ address *= 4;
+ err |= twl4030_write_script_byte(address++, pmb_message >> 8);
+ err |= twl4030_write_script_byte(address++, pmb_message & 0xff);
+ err |= twl4030_write_script_byte(address++, delay);
+ err |= twl4030_write_script_byte(address++, next);
+
+ return err;
+}
+
+static int __init twl4030_write_script(u8 address, struct twl4030_ins *script,
+ int len)
+{
+ int err = 0;
+
+ for (; len; len--, address++, script++) {
+ if (len == 1)
+ err |= twl4030_write_script_ins(address,
+ script->pmb_message,
+ script->delay,
+ END_OF_SCRIPT);
+ else
+ err |= twl4030_write_script_ins(address,
+ script->pmb_message,
+ script->delay,
+ address + 1);
+ }
+
+ return err;
+}
+
+static int __init config_wakeup3_sequence(u8 address)
+{
+
+ int err = 0;
+
+ /* Set SLEEP to ACTIVE SEQ address for P3 */
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+ R_SEQ_ADD_S2A3);
+
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, LVL_WAKEUP,
+ R_P3_SW_EVENTS);
+ if (err)
+ printk(KERN_ERR "TWL4030 wakeup sequence for P3" \
+ "config error\n");
+
+ return err;
+}
+
+static int __init config_wakeup12_sequence(u8 address)
+{
+ int err = 0;
+
+ /* Set SLEEP to ACTIVE SEQ address for P1 and P2 */
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+ R_SEQ_ADD_SA12);
+
+ /* P1/P2/P3 LVL_WAKEUP should be on LEVEL */
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, LVL_WAKEUP,
+ R_P1_SW_EVENTS);
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, LVL_WAKEUP,
+ R_P2_SW_EVENTS);
+
+ if (machine_is_omap_3430sdp() || machine_is_omap_ldp()) {
+ u8 data;
+ /* Disabling AC charger effect on sleep-active transitions */
+ err |= twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &data,
+ R_CFG_P1_TRANSITION);
+ data &= ~(1<<1);
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, data ,
+ R_CFG_P1_TRANSITION);
+ }
+
+ if (err)
+ printk(KERN_ERR "TWL4030 wakeup sequence for P1 and P2" \
+ "config error\n");
+
+ return err;
+}
+
+static int __init config_sleep_sequence(u8 address)
+{
+ int err = 0;
+
+ /*
+ * CLKREQ is pulled high on the 2430SDP, therefore, we need to take
+ * it out of the HFCLKOUT DEV_GRP for P1 else HFCLKOUT can't be stopped.
+ */
+
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER,
+ 0x20, R_HFCLKOUT_DEV_GRP);
+
+ /* Set ACTIVE to SLEEP SEQ address in T2 memory*/
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+ R_SEQ_ADD_A2S);
+
+ if (err)
+ printk(KERN_ERR "TWL4030 sleep sequence config error\n");
+
+ return err;
+}
+
+static int __init config_warmreset_sequence(u8 address)
+{
+
+ int err = 0;
+ u8 rd_data;
+
+ /* Set WARM RESET SEQ address for P1 */
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, address,
+ R_SEQ_ADD_WARM);
+
+ /* P1/P2/P3 enable WARMRESET */
+ err |= twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
+ R_P1_SW_EVENTS);
+ rd_data |= ENABLE_WARMRESET;
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
+ R_P1_SW_EVENTS);
+
+ err |= twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
+ R_P2_SW_EVENTS);
+ rd_data |= ENABLE_WARMRESET;
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
+ R_P2_SW_EVENTS);
+
+ err |= twl4030_i2c_read_u8(TWL4030_MODULE_PM_MASTER, &rd_data,
+ R_P3_SW_EVENTS);
+ rd_data |= ENABLE_WARMRESET;
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, rd_data,
+ R_P3_SW_EVENTS);
+
+ if (err)
+ printk(KERN_ERR
+ "TWL4030 Power Companion Warmreset seq config error\n");
+ return err;
+}
+
+static int __init load_triton_script(struct twl4030_script *tscript)
+{
+ u8 address = triton_next_free_address;
+ int err;
+
+ err = twl4030_write_script(address, tscript->script, tscript->size);
+ if (err)
+ return err;
+
+ triton_next_free_address += tscript->size;
+
+ if (tscript->flags & TRITON_WRST_SCRIPT)
+ err |= config_warmreset_sequence(address);
+
+ if (tscript->flags & TRITON_WAKEUP12_SCRIPT)
+ err |= config_wakeup12_sequence(address);
+
+ if (tscript->flags & TRITON_WAKEUP3_SCRIPT)
+ err |= config_wakeup3_sequence(address);
+
+ if (tscript->flags & TRITON_SLEEP_SCRIPT)
+ err |= config_sleep_sequence(address);
+
+ return err;
+}
+
+void __init twl4030_power_init(struct twl4030_power_data *triton2_scripts)
+{
+ int err = 0;
+ int i;
+
+ err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_1,
+ R_PROTECT_KEY);
+ err |= twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, KEY_2,
+ R_PROTECT_KEY);
+ if (err)
+ return err;
+
+ for (i = 0; i < triton2_scripts->size; i++) {
+ err = load_triton_script(triton2_scripts->scripts[i]);
+ if (err)
+ return err;
+ }
+
+ err = twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, R_PROTECT_KEY);
+
+ return err;
+
+}
--
1.5.6.3
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
