* Siarhei Siamashka <siarhei.siamas...@nokia.com> [090114 20:18]:
> On Tuesday 13 January 2009 16:31:53 ext Tony Lindgren wrote:
> > Hi,
> >
> > Looks OK in general, few comments below.
> >
> > Once you're done with the changes, this should get posted to
> > linux-arm-ker...@lists.arm.linux.org.uk for review with linux-omap
> > list Cc'd.
>
> Thanks a lot for a patch review. I just have a few questions before
> resubmitting a fixed version.
>
> [...]
>
> > > +static int gptimer_start(void)
> > > +{
> > > + u32 count = counter_config[0].count;
> > > + gptimer = omap_dm_timer_request();
> > > + BUG_ON(gptimer == NULL);
> >
> > Maybe just return -ENODEV here instead BUG_ON? In theory you could
> > build a multi-omap kernel that works on multiple boards, and you
> > could have all timers used up on some boards.
>
> OK
>
> > > + omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ);
> > > + if (request_irq(omap_dm_timer_get_irq(gptimer), gptimer_interrupt,
> > > + IRQF_DISABLED, "oprofile gptimer", NULL) != 0) {
> > > + printk(KERN_ERR "oprofile: unable to request gptimer IRQ\n");
> > > + return -1;
> >
> > Could return something from errno.h here.
>
> I grepped the kernel sources for 'request_irq' calls and they are not very
> consistent about what to return in the case when it fails. But one of the
> most common variants to handle this error is just to propagate error code
> returned by 'request_irq' outside. Would it be ok?
Sure.
> > > + }
> > > +
> > > + if (count < 1)
> > > + count = 1;
> > > +
> > > + omap_dm_timer_set_load_start(gptimer, 1, 0xffffffff - count);
> > > + omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
> > > + return 0;
> > > +}
> >
> > You might want to use omap_dm_timer_request_specific() instead, and
> > use a timer that's connected to WKUP domain. Otherwise you'll miss
> > timer events in off-while-idle and retention-while-idle.
>
> Probably having timer events when idle is actually not desired. Ideally
> oprofile should collect samples only when CPU is active and provide a
> report which represents CPU usage more or less precisely. So maybe
> CORE power domain suits better here?
I don't know, I guess you'll have to figure out what works best. Being
able to profile idle latencies would be very good data, as the wake-up
latencies from retention-while-idle and off-while-idle can be long.
> Also 'common.c' from oprofile directory contains code under CONFIG_PM ifdef
> and provides hooks supposedly for suspend and resume operations.
Yeah, well those are for suspend and resume. On omaps we can hit
retention or off mode during every idle loop if those features are
enabled in /sys/power. So if you have a gptimer running based on the
32KiHz source clock, and is in wake-up domain, you should be still able
to profile how long the off mode during idle took. From that point of
view using a gptimer is better than using the ARM cycle counter as the
whole ARM might be powered off during idle.
> About 'omap_dm_timer_request_specific'. Would it be right to first try all the
> timers from the suitable domain, and then try to get just any timer before
> bailing out (to handle the case when most of the timers are already used)?
>
> > I suggest not to use GPTIMER12, as it's interrupt also gets triggered
> > by spurious interrupts. But maybe you can find some other timer that's
> > in the WKUP domain by reading the 34xx TRM.
>
> Thanks, note about broken GPTIMER12 taken.
>
> > Note that you cannot use GPTIMER1 either, because it's used for the
> > system timer. I believe 24xx only has GPTIMER1 in the WKUP domain,
> > so you might want to use omap_dm_timer_request() if cpu_is_omap24xx().
> > Don't know if 2430 has more thant GPTIMER1 in WKUP domain.
>
> IMHO there is little need to use this oprofile driver on OMAP2 chips at all
> (except for testing purposes, which I actually also have done on OMAP2420
> too prior to submitting initial revision of the patch). The hardware
> performance counters work and do the job fine there. Supporting OMAP1 may
> have some practical value.
OK
Tony
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
