Hi,
On Thursday 20 March 2014 12:26 PM, Chanwoo Choi wrote:
> Hi,
>
> On 03/20/2014 02:20 PM, Kishon Vijay Abraham I wrote:
>> Hi,
>>
>> On Thursday 20 March 2014 07:52 AM, Chanwoo Choi wrote:
>>> Hi,
>>>
>>> On 03/19/2014 09:08 PM, Kishon Vijay Abraham I wrote:
>>>> Hi,
>>>>
>>>> On Tuesday 18 March 2014 05:34 PM, Chanwoo Choi wrote:
>>>>> This patch remove unnecessary function call in of_extcon_get_extcon_dev()
>>>>> by using the name of device_node structure.
>>>>>
>>>>> Signed-off-by: Chanwoo Choi <cw00.c...@samsung.com>
>>>>> ---
>>>>> drivers/extcon/of_extcon.c | 12 ++----------
>>>>> 1 file changed, 2 insertions(+), 10 deletions(-)
>>>>>
>>>>> diff --git a/drivers/extcon/of_extcon.c b/drivers/extcon/of_extcon.c
>>>>> index 72173ec..0a29f82 100644
>>>>> --- a/drivers/extcon/of_extcon.c
>>>>> +++ b/drivers/extcon/of_extcon.c
>>>>> @@ -32,7 +32,6 @@ struct extcon_dev *of_extcon_get_extcon_dev(struct
>>>>> device *dev, int index)
>>>>> {
>>>>> struct device_node *node;
>>>>> struct extcon_dev *edev;
>>>>> - struct platform_device *extcon_parent_dev;
>>>>>
>>>>> if (!dev->of_node) {
>>>>> dev_dbg(dev, "device does not have a device node entry\n");
>>>>> @@ -46,16 +45,9 @@ struct extcon_dev *of_extcon_get_extcon_dev(struct
>>>>> device *dev, int index)
>>>>> return ERR_PTR(-ENODEV);
>>>>> }
>>>>>
>>>>> - extcon_parent_dev = of_find_device_by_node(node);
>>>>> - if (!extcon_parent_dev) {
>>>>> - dev_dbg(dev, "unable to find device by node\n");
>>>>> - return ERR_PTR(-EPROBE_DEFER);
>>>>> - }
>>>>> -
>>>>> - edev = extcon_get_extcon_dev(dev_name(&extcon_parent_dev->dev));
>>>>> + edev = extcon_get_extcon_dev(node->name);
>>>>
>>>> Since you no longer want to use device names I think you should add this
>>>> too to
>>>> warn users if they rely on using the device name.
>>>
>>> Previous of_extcon_get_extcon_dev() support only platform device using
>>> of_find_device_by_node.
>>>
>>> If extcon device is based on i2c/spi/pci and so on,
>>> of_extcon_get_extcon_dev() can't
>>> find device instance for device name. So, I change device name from the
>>> name of platform device
>>> to the name of dt node.
>>
>> That's fine. But we have to fix extcon_dev_register() too, to not use device
>> names right? We have to warn extcon users not to use device names right?
>
> I don't think so. extcon_get_edev_by_phandle() shows wrong node->name as
> following:
The wrong node->name was given by the extcon provider but the error is being
reported in the consumer.
> The consumer could detect the cause of problem which can't get extcon device
> after
> checking error log message.
>
> edev = extcon_get_extcon_dev(node->name);
> if (!edev) {
> dev_err(dev, "unable to get extcon device : %s\n", node->name);
> return ERR_PTR(-ENODEV);
> }
>
> I don't want to add more log message.
I'm not sure if that log message is helpful in anyway to identify the problem
was because of the wrong node->name.
>
>>>
>>>
>>>> diff --git a/drivers/extcon/extcon-class.c b/drivers/extcon/extcon-class.c
>>>> index bc4c789..025eb39 100644
>>>> --- a/drivers/extcon/extcon-class.c
>>>> +++ b/drivers/extcon/extcon-class.c
>>>> @@ -601,7 +601,6 @@ int extcon_dev_register(struct extcon_dev *edev)
>>>> edev->dev.class = extcon_class;
>>>> edev->dev.release = extcon_dev_release;
>>>>
>>>> - edev->name = edev->name ? edev->name : dev_name(edev->dev.parent);
>>>> //The user should always pass the 'name' as we no longer use device name
>>>> while
>>>> getting extcon device. And this name should also be the 'node' name?
>>>> if (IS_ERR_OR_NULL(edev->name)) {
>>>> dev_err(&edev->dev,
>>>> "extcon device name is null\n");
>>>>
>>>> Btw changing to node name from device name breaks dwc3 in OMAP5 and you
>>>> would
>>>> need this too..
>>>>
>>>> diff --git a/drivers/extcon/extcon-palmas.c
>>>> b/drivers/extcon/extcon-palmas.c
>>>> index 2aea4bc..cea8cd3 100644
>>>> --- a/drivers/extcon/extcon-palmas.c
>>>> +++ b/drivers/extcon/extcon-palmas.c
>>>> @@ -188,6 +188,7 @@ static int palmas_usb_probe(struct platform_device
>>>> *pdev)
>>>>
>>>> palmas_usb->edev.supported_cable = palmas_extcon_cable;
>>>> palmas_usb->edev.dev.parent = palmas_usb->dev;
>>>> + palmas_usb->edev.name = "palmas_usb";
>>>> palmas_usb->edev.mutually_exclusive = mutually_exclusive;
>>>>
>>>> status = extcon_dev_register(&palmas_usb->edev);
>>>>
>>>> Cheers
>>>> Kishon
>>>>
>>>
>>> If node name is same as extcon device name, don't need some modification.
>>> Also, you can modify node name in some OMAP dts file insead of modification
>>> of extcon-palmas.c
>>
>> node name in OMAP dts is already 'palmas_usb'. But since we were not setting
>> 'edev.name' in extcon-palmas.c, extcon_dev_register used device name of
>> palmas
>> (palmas_usb.7 in my case). So extcon-palmas.c needs the fix.
>
> For example,
> I used extcon provider/consumer driver in dts as following:
> extcon-max14577.c set device name as edev->name and then dt node name of
> max14577
> set "max14577-muic" which is same as device name(dev_name(&pdev->dev)).
>
> I don't need to modify extcon-max14577.c
>
> In drivers/extcon/extcon-max14577.c
> ...
> info->edev->name = dev_name(&pdev->dev);
dev_name need not be same as node name in all cases.
-Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
