From: Wolfram Sang <w...@sang-engineering.com>
In the comments, LCD pins 16-23 were numbered in the wrong order.
Fix this and use proper pinmux constants for all entries while we are
Signed-off-by: Wolfram Sang <w...@sang-engineering.com>
Cc: Benoit Parrot <bpar...@ti.com>
---
arch/arm/boot/dts/am335x-evm.dts | 56 ++++++++++++++++++++--------------------
1 file changed, 28 insertions(+), 28 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts
index 6028217ace0f..1b642f1cd469 100644
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -268,34 +268,34 @@
lcd_pins_s0: lcd_pins_s0 {
pinctrl-single,pins = <
- 0x20 0x01 /* gpmc_ad8.lcd_data16, OUTPUT | MODE1
*/
- 0x24 0x01 /* gpmc_ad9.lcd_data17, OUTPUT | MODE1
*/
- 0x28 0x01 /* gpmc_ad10.lcd_data18, OUTPUT | MODE1
*/
- 0x2c 0x01 /* gpmc_ad11.lcd_data19, OUTPUT | MODE1
*/
- 0x30 0x01 /* gpmc_ad12.lcd_data20, OUTPUT | MODE1
*/
- 0x34 0x01 /* gpmc_ad13.lcd_data21, OUTPUT | MODE1
*/
- 0x38 0x01 /* gpmc_ad14.lcd_data22, OUTPUT | MODE1
*/
- 0x3c 0x01 /* gpmc_ad15.lcd_data23, OUTPUT | MODE1
*/
- 0xa0 0x00 /* lcd_data0.lcd_data0, OUTPUT | MODE0
*/
- 0xa4 0x00 /* lcd_data1.lcd_data1, OUTPUT | MODE0
*/
- 0xa8 0x00 /* lcd_data2.lcd_data2, OUTPUT | MODE0
*/
- 0xac 0x00 /* lcd_data3.lcd_data3, OUTPUT | MODE0
*/
- 0xb0 0x00 /* lcd_data4.lcd_data4, OUTPUT | MODE0
*/
- 0xb4 0x00 /* lcd_data5.lcd_data5, OUTPUT | MODE0
*/
- 0xb8 0x00 /* lcd_data6.lcd_data6, OUTPUT | MODE0
*/
- 0xbc 0x00 /* lcd_data7.lcd_data7, OUTPUT | MODE0
*/
- 0xc0 0x00 /* lcd_data8.lcd_data8, OUTPUT | MODE0
*/
- 0xc4 0x00 /* lcd_data9.lcd_data9, OUTPUT | MODE0
*/
- 0xc8 0x00 /* lcd_data10.lcd_data10, OUTPUT |
MODE0 */
- 0xcc 0x00 /* lcd_data11.lcd_data11, OUTPUT |
MODE0 */
- 0xd0 0x00 /* lcd_data12.lcd_data12, OUTPUT |
MODE0 */
- 0xd4 0x00 /* lcd_data13.lcd_data13, OUTPUT |
MODE0 */
- 0xd8 0x00 /* lcd_data14.lcd_data14, OUTPUT |
MODE0 */
- 0xdc 0x00 /* lcd_data15.lcd_data15, OUTPUT |
MODE0 */
- 0xe0 0x00 /* lcd_vsync.lcd_vsync, OUTPUT | MODE0
*/
- 0xe4 0x00 /* lcd_hsync.lcd_hsync, OUTPUT | MODE0
*/
- 0xe8 0x00 /* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */
- 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en,
OUTPUT | MODE0 */
+ 0x20 (PIN_OUTPUT | MUX_MODE1) /*
gpmc_ad8.lcd_data23 */
+ 0x24 (PIN_OUTPUT | MUX_MODE1) /*
gpmc_ad9.lcd_data22 */
+ 0x28 (PIN_OUTPUT | MUX_MODE1) /*
gpmc_ad10.lcd_data21 */
+ 0x2c (PIN_OUTPUT | MUX_MODE1) /*
gpmc_ad11.lcd_data20 */
+ 0x30 (PIN_OUTPUT | MUX_MODE1) /*
gpmc_ad12.lcd_data19 */
+ 0x34 (PIN_OUTPUT | MUX_MODE1) /*
gpmc_ad13.lcd_data18 */
+ 0x38 (PIN_OUTPUT | MUX_MODE1) /*
gpmc_ad14.lcd_data17 */
+ 0x3c (PIN_OUTPUT | MUX_MODE1) /*
gpmc_ad15.lcd_data16 */
+ 0xa0 (PIN_OUTPUT | MUX_MODE0) /*
lcd_data0.lcd_data0 */
+ 0xa4 (PIN_OUTPUT | MUX_MODE0) /*
lcd_data1.lcd_data1 */
+ 0xa8 (PIN_OUTPUT | MUX_MODE0) /*
lcd_data2.lcd_data2 */
+ 0xac (PIN_OUTPUT | MUX_MODE0) /*
lcd_data3.lcd_data3 */
+ 0xb0 (PIN_OUTPUT | MUX_MODE0) /*
lcd_data4.lcd_data4 */
+ 0xb4 (PIN_OUTPUT | MUX_MODE0) /*
lcd_data5.lcd_data5 */
+ 0xb8 (PIN_OUTPUT | MUX_MODE0) /*
lcd_data6.lcd_data6 */
+ 0xbc (PIN_OUTPUT | MUX_MODE0) /*
lcd_data7.lcd_data7 */
+ 0xc0 (PIN_OUTPUT | MUX_MODE0) /*
lcd_data8.lcd_data8 */
+ 0xc4 (PIN_OUTPUT | MUX_MODE0) /*
lcd_data9.lcd_data9 */
+ 0xc8 (PIN_OUTPUT | MUX_MODE0) /*
lcd_data10.lcd_data10 */
+ 0xcc (PIN_OUTPUT | MUX_MODE0) /*
lcd_data11.lcd_data11 */
+ 0xd0 (PIN_OUTPUT | MUX_MODE0) /*
lcd_data12.lcd_data12 */
+ 0xd4 (PIN_OUTPUT | MUX_MODE0) /*
lcd_data13.lcd_data13 */
+ 0xd8 (PIN_OUTPUT | MUX_MODE0) /*
lcd_data14.lcd_data14 */
+ 0xdc (PIN_OUTPUT | MUX_MODE0) /*
lcd_data15.lcd_data15 */
+ 0xe0 (PIN_OUTPUT | MUX_MODE0) /*
lcd_vsync.lcd_vsync */
+ 0xe4 (PIN_OUTPUT | MUX_MODE0) /*
lcd_hsync.lcd_hsync */
+ 0xe8 (PIN_OUTPUT | MUX_MODE0) /*
lcd_pclk.lcd_pclk */
+ 0xec (PIN_OUTPUT | MUX_MODE0) /*
lcd_ac_bias_en.lcd_ac_bias_en */
>;
};
--
1.9.2
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
