Kernel: vanilla 3.15-rc5 kexec: latest git (21.05.2014) I can load the zImage + dtb from u-boot, but invoking kexec prints following data and nothing happens after "Bye!":
# kexec -d -f --dtb=/mnt/boot/am335x-evmsk.dtb /mnt/boot/zImage kernel: 0xb5eab008 kernel_size: 0x2036c kexec_load: entry = 0x80008000 flags = 0x280000 nr_segments = 2 segment[0].buf = 0xb5eab008 segment[0].bufsz = 0x43d328 segment[0].mem = 0x80008000 segment[0].memsz = 0x43e000 segment[1].buf = 0x29008 segment[1].bufsz = 0x7e89 segment[1].mem = 0x810f6000 segment[1].memsz = 0x8000 Starting new kernel Bye! u-boot output for the same kernel+dtb: SD/MMC found on device 0 reading uEnv.txt 582 bytes read in 8 ms (70.3 KiB/s) Loaded environment from uEnv.txt Importing environment from mmc ... Running uenvcmd ... 4444968 bytes read in 466 ms (9.1 MiB/s) 32393 bytes read in 46 ms (687.5 KiB/s) Kernel image @ 0x82000000 [ 0x000000 - 0x43d328 ] ## Flattened Device Tree blob at 80000000 Booting using the fdt blob at 0x80000000 Loading Device Tree to 8f618000, end 8f622e88 ... OK Wang, what hardware do you use? Regards, Yegor -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
