Because certain secure hypervisor do not allow writes to individual L2C
registers, but rather expect set of parameters to be passed as argument
to secure monitor calls, there is a need to provide an interface for the
L2C driver to ask the firmware to configure the hardware according to
specified parameters. This patch adds such.
Signed-off-by: Tomasz Figa <t.f...@samsung.com>
---
arch/arm/include/asm/outercache.h | 3 +++
arch/arm/mm/cache-l2x0.c | 6 ++++++
2 files changed, 9 insertions(+)
diff --git a/arch/arm/include/asm/outercache.h
b/arch/arm/include/asm/outercache.h
index 891a56b..563b92f 100644
--- a/arch/arm/include/asm/outercache.h
+++ b/arch/arm/include/asm/outercache.h
@@ -23,6 +23,8 @@
#include <linux/types.h>
+struct l2x0_regs;
+
struct outer_cache_fns {
void (*inv_range)(unsigned long, unsigned long);
void (*clean_range)(unsigned long, unsigned long);
@@ -36,6 +38,7 @@ struct outer_cache_fns {
/* This is an ARM L2C thing */
void (*write_sec)(unsigned long, unsigned);
+ void (*configure)(const struct l2x0_regs *);
};
extern struct outer_cache_fns outer_cache;
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index b073563..84c6c55 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -109,6 +109,11 @@ static inline void l2c_unlock(void __iomem *base, unsigned
num)
static void l2c_configure(void __iomem *base)
{
+ if (outer_cache.configure) {
+ outer_cache.configure(&l2x0_saved_regs);
+ return;
+ }
+
if (l2x0_data->configure)
l2x0_data->configure(base);
@@ -909,6 +914,7 @@ static int __init __l2c_init(const struct l2c_init_data
*data,
fns = data->outer_cache;
fns.write_sec = outer_cache.write_sec;
+ fns.configure = outer_cache.configure;
if (data->fixup)
data->fixup(l2x0_base, cache_id, &fns);
--
2.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
