* Felipe Balbi <ba...@ti.com> [141229 07:53]: > On Mon, Dec 29, 2014 at 10:33:26AM +0100, Yegor Yefremov wrote: > > On Fri, Dec 12, 2014 at 8:19 PM, Yegor Yefremov > > <yegorsli...@googlemail.com> wrote: > > > On Fri, Dec 12, 2014 at 6:32 PM, Felipe Balbi <ba...@ti.com> wrote: > > >> Hi, > > >> > > >> On Fri, Dec 12, 2014 at 01:00:51PM +0100, Yegor Yefremov wrote: > > >>> U-Boot version: 2014.07 > > >>> Kernel config is omap2plus with enabled USB > > >>> > > >>> # cat /proc/version > > >>> Linux version 3.18.0 (user@user-VirtualBox) (gcc version 4.8.3 > > >>> 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-29) ) #6 SMP > > >>> Mon Dec 8 22:47:43 CET 2014 > > >> > > >> Wasn't GCC 4.8.x total crap for building ARM kernels ? IIRC it was even > > >> blacklisted. Can you try with 4.9.x just to make sure ? > > > > > > Will do. > > > > Adding linux-omap. Beginning of this discussion: > > http://comments.gmane.org/gmane.linux.network/341427 > > > > Quick summary: starting with kernel 3.18 or commit > > 55601c9f24670ba926ebdd4d712ac3b177232330 am335x (at least BBB and some > > custom boards) stalls at high network load. Reproducible via nuttcp > > within some minutes > > > > nuttcp -S (on BBB) > > nuttcp -t -N 4 -T30m 192.168.1.235 (on host) > > > > As Felipe Balbi suggested, I tried both 4.8.3 and 4.9.2 toolchains, > > but both show the same behavior. > > > > Linux version 3.18.0 (user@user-VirtualBox) (gcc version 4.8.3 > > 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-29) ) #6 SMP > > Mon Dec 8 22:47:43 CET 2014 > > Linux version 3.18.1 (user@user-VirtualBox) (gcc version 4.9.2 > > (Buildroot 2015.02-git-00582-g10b9761) ) #1 SMP Mon Dec 29 09:22:29 > > CET 2014 > > > > Let me know, if you can reproduce this issue. > > finally managed to reproduce this, it took quite a bit of effort though. > I'll see if I can gether more information about the problem.
Maybe check if the irqnr is 127 (or the last reserved interrupt) in irq-omap-intc.c. If so, also print out the previous interrupt. It seems the intc uses the last reserved interrupt to signal a spurious interrupt for the previous irqnr, so we should probably add some handling for that. If the previous interrupt is a cpsw interrupt, then there's probably something wrong with cpsw interrupt handling. Either a missing read-back to flush posted write in the cpsw interrupt handler, or the EOI registers are written at a wrong time. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe linux-omap" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
