On 03/21/2015 01:30 AM, Tony Lindgren wrote:
* Suman Anna <s-a...@ti.com> [150320 16:24]:
On 03/20/2015 05:35 PM, Tony Lindgren wrote:
* Suman Anna <s-a...@ti.com> [150320 14:44]:
On 03/20/2015 01:44 PM, Kristo, Tero wrote:
+ scm: scm@210000 {
+ compatible = "ti,am3-scm", "simple-bus";
+ reg = <0x210000 0x2000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x210000 0x2000>;
+
+ am33xx_pinmux: pinmux@800 {
+ compatible = "pinctrl-single";
+ reg = <0x800 0x238>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x7f>;
+ };
+
+ scm_conf: scm_conf@0 {
+ compatible = "syscon";
+ reg = <0x0 0x7fc>;
Hmm, you are consolidating the am33xx_control_module and cm nodes, so is
this supposed to be 0x800 or 0x7fc? I would think it should be 0x800.
Seems correct to me, it's offset 0, size 0x7fc. So that's the scm_conf
syscon area before pinctrl-single at 0x44c00000 + 0x210000 + 0.
The io area for pinctrl-single starts at 0x800, so the scm_conf should
be before it in the dts file.
Well, I understand that it is how it was before, but we won't be mapping
or covering the last register efuse_sma before the pinctrl cfg
registers. Any reason for just leaving out that register?
Oh I see yeah that looks like a bug to me.
Tony
Updated this patch in my branch now to make scm_conf area be size 0x800.
-Tero
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
